Cytec 1 of 1 B100
Process Materials Peel ply
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013
B100
Peel ply
Ideally suited to a wide range of composite processing applications
Features
Lightweight, porous nylon peel ply.
Heat set and scoured, for use directly against
laminates or bond lines, particularly where secondary
bonding, painting or finishing is required.
Imparts a fine weave pattern upon removal from the
laminate.
Strips cleanly and quickly from most commercial resin
systems.
Available coated and non-coated depending on user
requirement.
Recommended for composite manufacture and metal
bonding applications.
CYTEC does not recommend the use of woven nylon
fabrics with phenolic resin or pre-preg systems as acid
in the catalyst can break down nylon materials.
Therefore, we recommend that customers conduct
their own internal compatibility tests.
Properties
Maximum use temperature 204 C 400 F
Colour White
Fabric type Nylon
Fabric weight 58g/m 1.70oz/yd
Availability
Standard width 1.47m 58in
Standard length 100m 109yd
Slit widths available
Storage
No special storage conditions required.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
All statements, technical information and recommendations contained in this data sheet are given in good faith and are based on tests believed to be reliable, but their accuracy and completeness are not guaranteed. They
do not constitute an offer to any person and shall not be deemed to form the basis of any subsequent contract. All products are sold subject to the Cytec s Standard Terms and conditions of Sale. Accordingly, the user shall
determine the suitability of the products for their intended use prior to purchase and shall assume all risk and liability in connection therewith. It is the responsibility of those wishing to sell items made from or embodying
the products to inform the user of the properties of the products and the purposes for which they may be suitable, together with all precautionary measures required in handling those products. The information contained
herein is under constant review and liable to be modified from time to time.
Copyright 2012 Cytec Process Materials (Keighley) Ltd, Cytec Process Materials (CA) Inc, Cytec Process Materials (Toulouse) Sarl, Cytec Process Materials (Milan) Srl . All rights reserved worldwide. All trademarks or
registered trademarks are the property of their respective owners.