TECHNICAL DATA SHEE T
VAC-PAK
E2760
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK E2760_0 2.21_Issue1
VAC-PAK
E2760
Release film
Ideally suited to highly contours parts applications
Features and Benefits
Economical, high elongation and low temperature
release film with excellent conformability.
Designed for use on highly contoured parts for cure
temperatures up to 121 C, it offers good release in
the curing temperature range of most polyesters,
vinylesters, phenolic and some epoxies, as well as
others applications where release films are required.
Colored red for easy identification and removal from
parts.
Available in perforated and non- perforated.
Please call for available perforations.
PROPERTIES
Maximum use temperature 121 C 250 F
Color Red
Tensile modulus <2000
Elongation at break (ASTM D882) >800%
AVAILABILITY
Thickness 50, 75 m 0.002, 0.003in
Widths 1.52m X 304.8m 60in X 1000ft
Formats available Sheet
STORAGE
Do not store rolls vertically on their ends
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.