page 1 of 1
date of creation: 17 January 2020
Product Safety Information
Safe use, handling and storage
Flow Media FM-VI10
Due to the physical and chemical characteristics of the Flow Media VI10, the product can be
considered as an Article along with ECHA and EPA guidelines.
PRODUCT CHARACTERISTICS
Extruded plastic net
Polypropylene Homopolymer
Physical State at 20 C: Solid
Odour: Odourless
Melting range ( C): 160 to 165
Flash Point ( C): > 300
Flammability ( C): > 300
Relative Density at 20 C: 0.905
Solubility in Water: Insoluble
Viscosity: Not applicable
FIRE FIGHTING MEASURES
ExtinguishableMedia:CarbonDioxideorpowder,foam.Donotusewaterjetssincetheycouldhelp
to spread the flames.
Hazardous decomposition Products:
*Complete Combustion: carbon dioxide (CO2) and water vapour
*Partial combustion: form also carbon monoxide (CO), soot and cracked products like aldehydes,
ketones, acetone, acetaldehyde, formaldehyde, acrolein, hydrocarbons and volatile fatty acids
STORAGE AND USE
Store at ambient temperatures (we recommend between 5 C to 30 C).
Do not store the products near highly flammable materials and store them away from heating sources.
Avoid static electricity build-up with connection to earth. Store in a dry, well-ventilated area.
Prolonged storage should preferably be out of the sun or other sources of radiation.
Recommended use temperature: -20 C to 80 C
Avoid contact with strong oxidizing materials and fluorine. Avoid proximity or contact with flames and
sparks. It is recommended not to heat at a temperature higher than 110 C.
DISPOSAL CONSIDERATIONS
Theproductiscompletelyrecyclableandnon-toxic.Itshouldbeusedaccordingtogoodworking
practiceswithoutdisposingofitintheenvironment.Theproductispersistentintheenvironment.Itis
not biodegradable.
Prepared By: PM Product Regulatory Affairs Specialist; E-mail: ilaria.tortone@solvay.com
All above pieces of information are considered to be correct and given in good faith. The information contained is based on our
knowledge of the products at the date of publishing. Users are advised of possible additional hazards when the products are used in
applications for which they were not intended. This sheet shall only be used and reproduced for prevention and security purposes.