TECHNICAL DATA SHEE T
RC-3000- 20
BREATHER FABRIC
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS RC-3000- 20_02.21_Issue1
RC-3000-20
Breather fabric
Ideally suited to aerospace applications
Features and Benefits
Non-woven polyester felt capable of operating at
temperatures up to 204 C (400 F) and pressures up
to 200PSI (13.8 bar).
Will not trap off as many other 680g/m (20oz/yd )
breathers will during normal cure cycles.
Non-toxic, non-corrosive, non-dusting and non-
allergenic.
An excellent breather choice for complex contour,
double curvature details due to its multi-directional
stretch and low density, high loft construction.
Ideally suited for use as an edge breather.
PRODUCT VARIANTS
Also available RC-3000- 20 FR (fire retardant). RC-3000-20 FR is recommended for use in non- inert curing atmosphere
and meets vertical burn test per F.A.R. Para. 25.583 (B).
PROPERTIES
Maximum use temperature 204 C 400 F
Color White
Fiber Polyester
Weight 680g/m 20oz/yd
NB: RC3000-10A has no release characteristics and should be separated from the laminate by a suitable porous release fabric or film when used in conjunction
with uncured materials.
AVAILABILITY
Standard width Up to 1.52m Up to 6in
Standard length Up to 23m Up to 25yd
Cut shapes/slit widths Available up to 120in wide to order
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.