Technical
Data SheetA Walker Industries Company
853-NB RESIN CLEANER
853-NBResin Cleaneris a highly effective emulsion cleaner used to remove a broad spectrum of industrial soils
including petroleum-based oils and greases as well as inks, uncured paints and lacquers, and silica (dirt) deposits.
Typical applications for 853-NBResin Cleanerinclude general maintenance tasks, parts washers, cleaning shop
floors, machine tools and production soil removal using heated turbulator tanks, foam guns, pressure washers and
hand wipe-down. After cleaning and with only moderate rinsing, polished surfaces will generally be free of both
waterbreaks and hazy detergent films.
Product Description
Physical Properties
Appearance Blue liquid, slight glycol ether odor.
Density 8.69 – 8.77 lbs/US Gal
(@78 F)
pH 11.50 – 12.50
(@78 F)
Refractive Index 23.0 – 23.4 %
(@78 F)
Non-flammable for ease of handling
853-NBResin Cleaneris as effective at ambient temperatures as most products are when they are heated.
Because it is a water-base emulsion without the flammability hazards of conventional solvent-base cleaners,
853-NBResin Cleanercan be safely heated to increase its performance even more. Economical to use –
concentrated and recyclable to last longer.
Economical to use -concentrated and recyclable to last longer.
853-NBis highly concentrated -dilute one volume with up to 10 volumes of water for use. And to add to its
economy, when properly filtered, 853-NBcan be reused up to three times.
Tools come clean -with no sticky residues
The dissolving action of acetone or methylene chloride frequently leaves behind sticky surfaces. 853-NBworks
to settle out most of the residues to leave your tools clean and tack-free.
Water-base formulation more environmentally sound than conventional solvents
853-NBcontains no ozone-depleting chemicals and does not qualify as a hazardous waste under current RCRA
regulations. Dispose of wastes and spills, in conjunction with federal, state and local laws governing non-
hazardous materials.
Features and Benefits
Technical
Data SheetA Walker Industries Company
Provides excellent performance over broad range of water hardness
853-NBcontrols hardwater ions which could otherwise interfere in the suspension and settling of resins.
Uses 3-way chemical action to prevent resins adhering to surfaces
853-NBbreaks up uncured resins and temporarily prevents the cross-linking of uncured resin molecules, then
slows the action of catalysts so resins can be removed before they cure on unwanted surfaces. The chemistry of
853-NBhelps make your job easier.
Features and Benefits
CLEANING TOOLS AND EQUIPMENT (rollers, brushes, etc.)
Mix one volume853-NBResin Cleanerwith 10 volumes water. Although hot water is not required -853-NBResin
Cleanerworks as well cold as most products work when heated -it cleans even more effectively at temperatures of
104 -107 F. Simply immerse your fixed brushes and metal and plastic rollers in the cleaning solution. Either manual
agitation or automated brush and tool cleaning equipment can then be used to loosen residues from tool surfaces.
With some resins and with more advanced gel states, more vigorous agitation may be necessary. After cleaning,
rinse toolsin clean water to remove residual 853-NB853-NBResin Cleanerand clinging sediments. Use com-
pressed air to remove the rinse water then complete the drying process on a drying rack or with water-absorbing
solvent.
GUN FLUSHING
853-NBResin Cleanerhas been tested with great success by Venus-Gusmer, a leading manufacturer of resin
application systems. Best results are achieved using one volume 853-NBResin Cleanerdiluted with five volumes
water. Flush guns with the solution, introducing air into the line while flushing if possible. Rinse with water if the gun
is to be out of service for more than eight hours. Be sure to purge any residual water from the tip of the gun before
spraying resin and chop on a part.
Application
After hardening and air-drying, the separated resins need to be disposed in accordance with local regulations. Those
resins that remain in a pasty state can be mixed with catalyzed resin and hardened for disposal or subsequent use.
Commercial evaporators can be used to economically dispose of 50 to 1000 gallons per day of spent liquid cleaning
solution. Contact air quality regulators for the necessary permits.
In some instances, the spent 853-NBsolution can be discarded in the sanitary sewer system. Before discharging
spent solution into the sanitary sewer, local authorities must be contacted for approval.
Waste Disposal
Before using this product, please read the Safety Data Sheet Numberfor853-NBResin Cleanerand follow the
recommended safety instructions.
Additional Notes
Technical
Data SheetA Walker Industries Company
Products and information are intended for use by persons having skill and knowledge in the industry at their own discretion and risk. Product Bulletins are intended to provide general information
on Walker Emulsions products and should not be construed as guaranteeing specific properties of the product described or suitability for a particular application. Users cannot anticipate all
conditions under which our products, or the products of other manufacturers are combined, stored or may be used. Users are advised to make their own tests to determine suitability. Unless
otherwise agreed to in writing, Walker Emulsions products are sold without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and
use of our products, whether used alone or in combination with other products.
Disclaimer
www.walkerind.com
Walker Emulsions Limited
4365 Corporate Drive
Burlington, ON, CAN L7L 5P7
905-336-1216
888-636-1216
Walker Emulsions Inc.
4401 SE Johnson Creek Blvd
Portland, OR, USA 97222
503-659-1708
800-554-4666
Walker Emulsions (USA) Inc.
700 Prosperity Drive
Orangeburg, SC, USA 29115
803-585-0149
855-229-9242