SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 05/13/2015 Revision date: 08/29/2018 Supersedes: 07/08/2016 Version: 2.3
08/29/2018 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :ArticleName :SE 84LV Glass 30-56% Resin Content
1.2. Recommended use and restrictions on use
Recommended use :The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Skin sensitisation, Category
1
H317 May cause an allergic skin reaction.Hazardous to the aquatic
environment Chronic
Hazard, Category 3
H412 Harmful to aquatic life with long lasting effects.
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) :Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (GHS-US) :P261 – Avoid breathing vapours.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()2/7NameProduct identifierGHS-US classificationFormaldehyde, polymer with (chloromethyl)oxirane and
phenol
(CAS-No.) 9003-36-525 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Phenol, polymer with formaldehyde, glycidyl ether(CAS-No.) 28064-14-410 – 25Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin
(number average molecular weight 700)
(CAS-No.) 25068-38-65 – 10Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing.First-aid measures after skin contact :Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion :Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Reactivity :The product is non-reactive under normal conditions of use, storage and transport. Product is
not explosive.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting :Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Emergency procedures :Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()3/7
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapours. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature :<= 35 CHygiene measures :Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Store in a well-ventilated place. Keep cool.Maximum storage period :2 yearStorage temperature :-23 - 13 CStorage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Not applicable reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Not applicable Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationDisposable glovesNitrile rubber (NBR)Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeTyvek Gown/Coveralls
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionDisposable half maskGas/vapour filterVapour protection
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()4/7
Personal protective equipment symbol(s):
Other information:Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Appearance :Flexible Sheet.Colour :white
Odour :odourless
Odour threshold :No data available
pH :Not applicable
Melting point :Not applicable.
Freezing point :Not applicable.
Boiling point :Not applicable.
Flash point :Not applicable.
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :> 100 C estimated
Not flammable.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :No data available
Solubility :insoluble in water.
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :Not applicable.
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2.Chemical stability
Stable under normal conditions.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4.Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5.Incompatible materials
No additional information available
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()5/7
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedFormaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation :Not classified
pH: Not applicable
Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSTOT-single exposure :Not classifiedSTOT-repeated exposure :Not classifiedAspiration hazard :Not classifiedViscosity, kinematic :No data availableSymptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :Harmful to aquatic life with long lasting effects.Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
No additional information available
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()6/7
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transportation of Dangerous GoodsTransport by sea
Proper Shipping Name (IMDG) :Not classified for transport
Air transport
Proper Shipping Name (IATA) :Not classified for transport
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic
Substances Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified
in 40 CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the EU NLP (No Longer Polymers) inventoryreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()7/7Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on Turkish inventory of chemical
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on Turkish inventory of chemical
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
ComponentState or local regulationsFormaldehyde, polymer with (chloromethyl)oxirane and
phenol(9003-36-5)
reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)(25068-
38-6)
Phenol, polymer with formaldehyde, glycidyl
ether(28064-14-4)
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/29/2018
Full text of H-statements:H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H400Very toxic to aquatic life.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product The information contained within this document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited
without Gurit's prior written consent.