TC-5002 A/B Page 1 of 2 Date: 02/02/2023
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-5002
SILICONE THINNER
This thinner was developed to help reduce the mixed viscosity of BJB s RTV silicones. The reduced viscosity is advantageous
when pouring into highly detailed areas.
APPLICATION:
SC-5002 can be added to any of BJB s RTV silicones. We would not recommend the addition of more than 20% of SC-5002
to the total mix of the A & B silicone system. Higher levels can significantly reduce the physical properties of the silicone.
The addition of SC-5002 will also lower the shore hardness of the silicone and lengthen the work life and ultimate cure time.
TYPICAL PHYSICAL PROPERTIES
TC-5050 A/B
without SC-5002
TC-5050 A/B
with 5% SC-5002
TC-5050 A/B
with 10% SC-5002
TC-5050 A/B
with 20% SC-5002
Hardness, Shore A 50 A 40 A 37 A 36 A
Hardness, Shore 00 — — — —
Viscosity (cps) 90,000 65,000 50,000 32,000
TC-5024 A/B
without SC-5002
TC-5024 A/B
with 5% SC-5002
TC-5024 A/B
with 10% SC-5002
TC-5024 A/B
with 20% SC-5002
Hardness, Shore A 25 A 14 A 10 A —
Hardness, Shore 00 — 70 00 60 00 52 00
Viscosity (cps) 31,000 23,000 17,000 11,000
HANDLING PROPERTIES
Specific Gravity @ 77 F (25 C) 0.97
Color Clear
STORAGE:
Store ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of
shipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallon Kits 40 lbs.
SILICONE CASTING RUBBERS
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
TC-5002 A/B Page 2 of 2 Date: 02/02/2023
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.