Temporary PRODUCT DATA SHEET
SikaBlock M700 N
Januar 2021, Version 02
Sika Advanced Resins
1
TEMPORARY PRODUCT DATA SHEET
SikaBlock M700 N
MODEL BOARD WITH DENSITY 44 LBS/FT
3
APPLICATIONS
Data control models and cubings
Master models and negatives
Molds for Low pressure (RIM) casting
Vacuum forming molds for lower number of pieces
MAIN PROPERTIES
Easy machinability
Low dust formation when milled
Dense fine surface
Easy to seal and to varnish
Very high dimensional stability
Good compressive strength and edge stability
Good heat distortion temperature
DESCRIPTION
Basis Polyurethane, light brown
Adhesive TCC-230, 2K Epoxy System
Filler P-34, 2K-Polyester-System
PHYSICAL PROPERTIES
approx. values ( )
Density ISO 845 Lbs/ft 44
Shore hardness ISO 868 – D 64
Flexural strength ISO 178 MPa 25
E-Modulus ISO 178 MPa 1,100
Heat distortion temperature ISO 75 B C 78
Glass transition temperature (Tg) ISO 11359 C 86
Linear thermal expansion coefficient DIN 53 752 K
-1
55 x 10
-6
Temporary PRODUCT DATA SHEET
SikaBlock M700 N
Januar 2021, Version 02
Sika Advanced Resins
2
PROCESSING DATA
approx. values
Adhesive/Filler TCC-230 P-34
Mixing ratio by weight 100 : 17 100 : 2
Pot life min TCC-102 (5), TCC- 104 (20) 4 – 6
Setting time h 12 – 24 15 – 20 min
PACKAGING UNITS
Board: SikaBlock M700 N
Adhesive: TCC-230, (A)
TCC-102, (B) 5 Minute Pot Life
or
TCC -104, (B) 20 Minute Pot Life
Filler: P-34, (A)
BPO-Paste, (B)
FURTHER INFORMATION
The information herein is offered for general guidance only. Advice on specific applications is available on request from the
Technical Department of Sika Advanced Resins. Copies of the following publications are available on request: Safety Data Sheets
BASIS OF PRODUCT DATA
All technical data stated in this document are based on laboratory tests. Actual measured data may vary due to circumstances
beyond our control.
HEALTH AND SAFETY INFORMATION
For information and advice regarding transportation, handling, storage and disposal of chemical products, users shall refer to the
actual Safety Data Sheets containing physical, ecological, toxicological and other safety-related data.
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and enduse of Sika products, are given in
good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under
normal conditions in accordance with Sika’s recommendations. In practice, the differences in materials, substrates and actual site
conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising
out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or
from any other advice offered. The user of the product must test the product’s suitability for the intended application and
purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed.
All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the
local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Temporary PRODUCT DATA SHEET
SikaBlock M700 N
Januar 2021, Version 02
Sika Advanced Resins
3
Contact
SIKA DEUTSCHLAND GMBH
Business Unit Industry
Stuttgarter Stra e 139
72574 Bad Urach
Phone: +49 7125 940-7692
E-Mail: industry@de.sika.com
Website: www.sika.de
SIKA AUTOMOTIVE FRANCE S.A.S.
ZI des B thunes – 15, Rue de l Equerre
95310 Saint-Ouen-l Aum ne
CS 40444
95005 Cergy Pontoise Cedex – FRANCE
Phone: +33 1 34 40 34 60
Fax: +33 1 34 21 97 87
E-Mail: advanced.resins@fr.sika.com
Website: www.sikaadvancedresins.fr
Sika S.A.U.
Carretera de Madrid a Ir n km 14.5
P.I. Congost 28108 Alcobendas (Madrid) – SPAIN
Phone: +34 93 225 16 20
E-Mail: sar-sales@es.sika.com
Website: www.sikaadvancedresins.es
Sika Italia S.p.A.
Via Luigi Einaudi 6
20068 Peschiera Borromeo (MI) – Italy
Phone. +39 02 54778111
Fax +39 02 54778 119
E-Mail: info@sika.it
Website: www.sika.it
Sika Limited
Head Office, Watchmead Welwyn
Garden City AL7 1BQ United Kingdom
Phone: +44 1707 394444
E-Mail: industry-sales@uk.sika.com
Website: www.gbr.sika.com
SIKA AUTOMOTIVE SLOVAKIA S.R.O.
Tovarenska 49
953 01 Zlate Moravce – SLOVAKIA
Phone: +421 2 5727 29 33
Fax: +421 37 3000 087
E-Mail: SikaAdvancedResins@sk.sika.com
Website: www.sikaadvancedresins.com
Sika Industry Tooling, Resins and Marine
30800 Stephenson Highway
Madison Heights, Michigan 48071 – USA
Phone: +1 248 588 2270
Fax: +1 248 616 7452
E-Mail: advanced.resins@us.sika.com
Website: www.sikaindustry.com
SIKA AUTOMOTIVE EATON RAPIDS, INC.
1611 Hults Drive
Eaton Rapids, Michigan 48827 – USA
Phone: +1 517 663 81 91
Fax: +1 517 663 05 23
E-Mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us
SIKA MEXICANA SA de CV
Av. Gustavo Baz #309 Centrum Park
54060 Tlanepantla Estado de MEXICO
Phone: +52 442 238 5800
E-Mail: roman.octavio@mx.sika.com
SIKA AUTOMOTIVE SHANGHAI CO. LTD.
N 53 Tai Gu Road
Wai Gao Qiao
Free Trade Zone, Pudong
200131 Shanghai – CHINA
Phone: +86 21 58 68 30 37
Fax: +86 21 58 68 26 01
E-Mail: industry@cn.sika.com
Website: www.sika.cn
Sika Ltd.
10 F, Shinagawa Intercity Tower B.
2-15-2 Konan, Minato-ku
Tokyo 108-6110 – JAPAN
Phone: +81 3 6433 2314
Fax: +81 3 6433 2102
E-Mail: advanced-resins@jp.sika.com
Website: www.jpn.sika.com
SIKA INDIA PVT LTD,
Plot No. Pap-V-90/1,
Chakan Industrial Area,
Phase-II, Vasuli, Khed, PUNE,
Maharashtra 410501
E-Mail: info.india@in.sika.com