SikaB
lock
PP152
1 /
3
PRODUCT DATA SHEET
SikaBlock PP152
Version 01.01 (01 – 2025), en_US
PRODUCT DATA SHEET
SikaBlock PP152 (Formerly PP-1052)
Polyurethane Tooling Board
TYPICAL PRODUCT DATA (FOR FURTHER VALUES SEE SAFETY DATA SHEET)
DESCRIPTION
SikaBlock PP152 is a filled,
polyurethane- based tooling board for
foundry pattern making, molds, tools,
and other applications.
PRODUCT BENEFITS
– Very good abrasion resistance
– Good toughness and impact resistance
– Easy to seal and varnish
– Low dust formation when milled
– High dimensional stability
– Easy machinability
– Good compression strength and edge
stability
– Can be polished to a high gloss
AREAS OF APPLICATION
SikaBlock PP152 is suitable for a wide range of
applications, ranging from prototype and low-
volume models and tools, to high- volume
foundry patterns, core boxes, match plates,
gating and risering. Other potential
applications include metal forming, vacuum
forming, headliner tools, hammer forming,
stretch press dies, hemmingbucks and
production checking, holding, and assembly
fixtures.
Tests with actual materials and conditions
have to be performed to ensure satisfactory
performance.
Chemical base Polyurethane
Color Red
Density at 74 F (23 C) ASTM D792-91 71 lbs/ft
3
(1.14 g/cc)
Shore D hardness (at 77 F/220 F and 25 C/104 C), ASTM D2240
80 and 55
Flexural strength, ASTM D790 12,800 psi (88 Mpa)
Flexural modulus, ASTM D790 331,000 psi (2,280 MPa)
Tensile strength, ASTM D638 8,900 psi (61 MPa)
Tensile elongation, ASTM D638
7.0 %
Compressive strength, ASTM D695 4,051 psi (28 Mpa)
Unnotched Izod Impact (complete break), ASTM D256 0.124 ft-lb/in. (6.62 J/m)
Heat deflection temperature at 265 psi 140 F (60 C)
Coefficient of Thermal Expansion (CTE) , ASTM E1545
36 ppm/ F (64 ppm/ C)
SikaBlock
PP152
2
/
3
Metric Machining Envelope English Machining Envelope
TYPICAL STABILITY DATA
Condition Weight (g) Length (mm)
Initial (2 x 4 x 4 pieces) 593.81 99.69
After 24 hours at -30 F 594.00 99.40
After 24 hours at standard lab conditions 593.85 99.68
After 6 hours at 130 F 593.80 99.94
After 24 hours at standard lab conditions 593.86 99.69
After 168 hours at 100 F/100% relative humidity 595.74 99.75
After 24 hours at standard lab conditions 594.32 99.70
Additional 24 hours at standard lab conditions 594.31 99.70
MACHINING RECOMMENDATIONS
A
A)
These are possible recommendations. There may be some variance depending on cutters and CNC mill capabilities.
MACHINING PARAMETERS
A
Cutter Edge Velocity (Vc) Feed per Tooth (fz)
Rough shape 328 1,312 ft/min (100 to 400 m/min) 0.006 0.028 in (0.15 to 0.70 mm)/revolution
Finish 1,312 2,625 ft/min (400 to 800 m/min) 0.002 0.004 in (0.06 to 0.10 mm)/revolution
N = ((12 English or 1,000 metric) X Vc) / (Pl X Dc)
– Vc: Cutter edge velocity in ft/min (m/minute)
– Dc: Cutting diameter in inches (mm)
– n: Spindle speed in revolution/minute
Vf = n X fz X Z
– fz: Feed per tooth in inches (mm)/revolution
– Z: Number of teeth
– Vf: Feed speed in inches (mm)/minute
A)
These are possible recommendations. There may be some variance depending on cutters and CNC mill capabilities.
SikaBlock
PP152
3
/
3
Sika Corporation
30800 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
Telephone: +1 248- 577-0020
Email: tsmh@us.sika.com
www.sikaindustry.com
PROCESSING CONDITIONS
Cutting suggestions for tooling planks
cutting horizontally on a planer mill: Head is
a 10 insert, 8 in diameter. For best results
use 5 inserts. Inserts are SFE-42E-10J-C5. We
have found a C2 Carbide insert does not chip
as easily. RPM 2200-2400 table feed 50-55
inches per minute. Some modifications may
be needed.
Saw Blades: A carbide- tipped, positive rake
saw blade with air slots should be used, if
possible. We suggest alternate top bevel ATB
or triple chip grind TCG rpm, depending on the
saw. We suggest 3,500 max rpm. Check with
manufacturer on saw and blade size. 12
blade, 48 teeth 16 blade, 48 teeth 18 blade,
60 teeth.
When sawing, you may need to back
part away from blade to relieve heat and
binding, then proceed with cut. It may be
necessary to take more than one cut to
achieve best finish.
Assembly/Finish: SikaBlock PP152 can be
bonded with the TCC-230 epoxy adhesive.
TCC-5220 is recommended to be used for the
patch paste.
Normal health and safety precautions should be
observed when handling these products:
Ensure adequate ventilation
Wear gloves, glasses, and protective clothes
For further information, please consult the Safety
Data Sheets.
STORAGE CONDITIONS
Store flat in a dry place. Allow time for
material to come to ambient temperature
prior to bonding or machining.
PACKAGING INFORMATION
Packaging information is available upon
request. Please contact your local Sika sales
representative.
FURTHER INFORMATION
Advice on specific applications will be given on
request. To contact Sika Corporation s Industry
Technical Services Department, send an email to
tsmh@us.sika.com. Copies of Safety Data
Sheets and Product Data Sheets are available
upon request.
BASIS OF PRODUCT DATA
All technical data stated in this document are
based on laboratory tests. Actual measured data
may vary due to circumstances beyond our
control.
ENVIRONMENTAL, HEALTH AND SAFETY
For further information and advice regarding
transportation, handling, storage and disposal of
chemical products, user should refer to the
actual Safety Data Sheets containing physical,
environmental, toxicological and other safety
related data. User must read the current
actual Safety Data Sheets before using any
products. In case of an emergency, call
CHEMTREC at 1-800-424-9300, International
703-527-3887.
LEGAL DISCLAIMER
Prior to each use of any product of Sika Corporation,
its subsidiaries or affiliates ( SIKA ), the user must
always read and follow the warnings and
instructions on the product s most current product
label, Product Data Sheet and Safety Data Sheet
which are available at usa.sika.com or by contacting
SIKA s Technical Service Department via email at
tsmh@us.sika.com. Nothing contained in any SIKA
literature or materials relieves the user of the
obligation to read and follow the warnings and
instructions for each SIKA product as set forth in the
current product label, Product Data Sheet and
Safety Data Sheet prior to use of the SIKA product.
SIKA warrants this product for one year from date
of installation to be free from manufacturing
defects and to meet the technical properties on the
current Product Data Sheet if used as directed
within the product s shelf life. User determines
suitability of product for intended use and assumes
all risks. User s and/or buyer s sole remedy shall be
limited to the purchase price or replacement of this
product exclusive of any labor costs. NO OTHER
WARRANTIES EXPRESS OR IMPLIED SHALL APPLY
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE
UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY
OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS. Sale of SIKA products are subject to the
Terms and Conditions of Sale which are available at
https://usa.sika.com/en/group/SikaCorp/termsand
conditions.html or by calling +1 800-933-7452.