615 S 4
th
Street, Elkhart, IN 46516-2717 Page 1 of 1
www.bigdogadhesives.com Ph: 833-BIG-DOGG (833-244-3644) September 2024
TECHNICAL DATA SHEET
1. DESCRIPTION:
BDRP 2400 is a high viscosity, rapid curing,
cyanoacrylate adhesive. It is designed to
bond a wide variety of similar and
dissimilar materials. The handling strength
in most applications is in the 15 to 20
seconds time period.
2. CHARACTERISTICS:
Color: Clear
Viscosity: 2400 cps
Specific Color: 1.07
Base: Ethyl
3. Performance Properties:
Substrate Fixture Time Bond Strength
Steel <18 seconds >2,200 PSI
Aluminum <15 seconds >1,800 PSI
Neoprene < 4 seconds > 800 PSI
ABS < 8 seconds > 900 PSI
PVC < 5 seconds > 900 PSI
Lexan < 25 seconds > 900 PSI
Phenolic < 10 seconds > 900 PSI
Note: ISO4587 is the method used.
4. Electrical Properties:
Dielectric Constant ASTM D150 Dissipation Factor
1 kHz 2.0 to 3.50/< .02
Volume Resistivity ASTM D257: 2 to 10 x 10
15
5. Factors Affecting Cure Speed:
GAP: Thin bond lines result in faster cure speed. The
larger bond gaps will lengthen cure speed.
HUMIDITY: Cyanoacrylates cure as a function of water
content. Higher humidity will cure products faster. Fixture
times are normally measured at 50% relative humidity
(RH).
6. Chemical/Solvent Resistance:
Percent of Strength retained after aging for 500 hours:
Gasoline at 75F 100%
Isopropanol (IPA) at 75F 100%
Ethanol (Denatured Alcohol) at 75F 100%
Freon TA at 75F 100%
Motor Oil at 105F 100%
Lexan (polycarbonate) at 105F & 95% RH 100%
7. What Cyanoacrylates Bond:
ABS NBR
Acrylic Neoprene
Aluminum Nitrile Rubber
Bakelite Nylon
Brass Phenolic
Chloroprene Polycarbonate
Chrome Polyester
Copper Polystyrene
EPDM Porcelain
Fiberglass PVC
Latex SBR
Leather Skin
Natural Rubber Steel
Wood Valox
8. Directions for use and Storage:
For optimum results, parts should be clean and
free from any oils, contamination or loose
surfaces (rust). If parts do not mate flush or
closely together, you will need to use a product
that has higher viscosity to compensate for the
gap. Any excess adhesive can be removed
with Debonder. Store in unopened containers,
out of the direct sunlight, in a dry location, at
room temperature (75F). Refrigeration can
extend shelf life.
9. ADDITIONAL INFORMATION
NOTE: Information contained herein is
based on tests we believe to be reliable and
accurate. It is offered in good faith for the
benefit of the consumer. The Company shall
not be liable for any injury, loss, or damage in
the use or handling of its chemical products
since conditions and use are beyond our
control. In every case, we urge and
recommend the user conduct tests to
determine to their own satisfaction that the
product is of acceptable quality and suitability
for their particular purpose under their own
operating conditions. Statements concerning
possible use of our products are not intended
as recommendations to use our products in
the infringement of any patent, or for any
particular purpose or application. These
products are intended for industrial use only.
BDRP 2400 Cyanoacrylate Adhesive