TECHNICAL DATA SHEET
TDS #: MP55310
METHACRYLATE ADHESIVE
9411 Corsiar Road
Frankfort,IL 60423
1-800-552-0299
asisupport@instantca.com
DESCRIPTION:
METHACRYLATE ADHESIVE
WHAT THE MP SERIES BONDS:
MP55310 is a high performance two part methacrylate adhesive engineered
to bond a wide range of plastics, metals, and composite assemblies. It offers
outstanding bond strength, is extremely durable, with excellent impact and
weathering properties. MP55310 greatly increases the reliability of finished
assemblies with exceptional flexibility, it s ability to with stand extreme
temperature fluctuation and thermal cycling, and resistance to a wide range of
chemicals and environmental conditions.
PHYSICAL PROPERTIES (UNCURED):
ACTIVATOR 60,000
COLOR: OFF WHITE AMBER, GREY, OR BLACK
MIXED DENSITY:
8.20
VISCOSITY @ 25
0
C (cps): RESIN 60,000
MIX RATIO: VOLUME 1 TO 1
WEIGHT 1 TO 1
THIX INDEX: 5
FLASH POINT: 51
0
F
PHYSICAL PROPERTIES (CURED):
STRENGTH (PSI): SHEAR 3000-3500
TENSILE 3000-3500
WORK TIME: 10 MINUTES
HANDLING STRENGTH: 30 MINUTES
GAP FILL: .125 INCHES
TEMPERATURE RANGE: -67
0
F – +250
0
F
METALS
*ALUMINUM
*STEEL
*STAINLESS
*COATED METALS
THERMO SETS
*FIBERGLASS
*PHENOLICS
*GEL COATS
*EPOXY
*RIM URETHANE
*POLYURETHANE
*LIQUID MOLDING RESINS
THERMO PLASTICS
*ACRYLICS
*ABS
*POLYCARBONATES
*NYLONS
*PPO s
*VINYL’S
*PVC s
*STYRENE’S
*PEEK s
*PBT BLENDS
*PET BLENDS
BENEFITS:
>NO SURFACE PREP
>EXCELLENT STRENGTH
>IMPACT R
ESISTANT
>100% R
EACTIVE
>ROOM TEMPERATURE CURE
>EASILY A
PPLIED
PACKAGING:
The MP 55310 Series is conveniently packaged in 50 mil, 400 mil, pail, and drum kits.
Special
packaging is available upon request.
EFFECTS OF TEMPERATURE:
The product is best used at temperatures between 65
0
F and 80
0
F. Temperatures below 65
0
F
will slow the cure speed of the material and viscosities will be highe r. Temperatures above 80
0
F
will cause the material to cure faster and viscosities will be lower. For consistent dispensing
maintain temperature in the above mentioned range.
STORAGE AND SHELF LIFE:
The shelf life of the MP55300 Series for most products is one y ear from date of shipment
(check with ASI). Shelf life is based on the products being stored properly at temperatures
between 55
0
F and 75
0
F. Exposure to temperatures above 75
0
F will reduce the shelf life of
these materials.
PRECAUTIONS:
ASI s MP55300 Series products are flammable. Keep away from heat, spark, and open
flames.
KEEP OUT OF REACH OF CHILDREN. THE PRODUCT IS FOR INDUSTRIAL USE ONLY.
Keep containers closed when not in use. Avoid contact with skin and eyes. Harmful if
swallowed. Refer to Material Safety Data Sheet for complete safety information.
HANDLING AND CLEAN-UP:
For optimum bond strength and to insure maximum performance in the finished assembly
mate parts together within the specified work time of the adhesive. Make sure the bond
joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It
is important to have the adhesive applied, parts aligned and positioned, within the
established work times for the product. To ensure maximum performance in the finished
assembly parts should remain undisturbed until the fixture time is reached.
Clean up is best before the adhesive has cured. Cleaners containing NMP (N-methyl
pyrolidone) or Citrus terpene provide the best results. On cured adhesive repeat use may
be required.
Revised 2/20/2014
NON WARRANTY:
Information contained herein is based on tests we believe to be reliable and accurate. It is offered in good faith for the benefit of the
consumer. The Company shall not be liable for any injury, loss, or damage in the use of its chemical products since conditions or use
are beyond our control. In every case we urge and recommend the user conduct tests to determine to their own satisfaction that the
product is of acceptable quality and suitable for their particular purpose under their own operating conditions. Statements concerning
the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. These
products are for industrial use only.