Page 1/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
43.0
* 1 Identification
Product identifier
Trade name: Quick-Tac 2 (Liquid)
Relevant identified uses of the substance or mixture.
Adhesive
Activator
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Adhesive Systems, Inc.
A Division of Royal Adhesives & Sealants, LLC
9411 Corsair Road
Frankfort, Illinois 60423
Phone Number: 800-552-0299
Information department:Environment protection department.
Emergency telephone number:
ChemTrec: Day or Night within USA and Canada: 1-800-424-9300.
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 2 H225 Highly flammable liquid and vapor.
GHS06 Skull and crossbones
Acute Tox. 3 H301 Toxic if swallowed.
Acute Tox. 3 H311 Toxic in contact with skin.
Acute Tox. 3 H331 Toxic if inhaled.
GHS08 Health hazard
STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H336 May cause drowsiness or dizziness.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) USA
Page 2/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 1)
43.0
Hazard pictograms
GHS02GHS06GHS07GHS08
Signal wordDanger
Hazard statements
Highly flammable liquid and vapor.
Toxic if swallowed, in contact with skin or if inhaled.
Causes skin irritation.
Causes serious eye irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves / eye protection / face protection.
Wear protective gloves / protective clothing.
Ground/bond container and receiving equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Specific treatment (see on this label).
Call a POISON CENTER/doctor.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER/doctor if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Get medical advice/attention if you feel unwell.
Rinse mouth.
In case of fire: Use for extinction: CO2, powder or water spray.
Take off immediately all contaminated clothing and wash it before reuse.
Store locked up.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
3
0
Health = 2
Fire = 3
Reactivity = 0
(Contd. on page 3)
USA
Page 3/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 2)
43.0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
PHYSICAL HAZARD
2
3
0
Health = 2
Fire = 3
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture
Hazardous components:
67-64-1 acetone 50-100%
99-97-8 N,N-dimethyl-p-toluidine 1.0%
* 4 First-aid measures
Description of first aid measures
After inhalation:
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:
Rinse mouth with water.
Seek medical treatment.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray.
Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Firefighters use standard protective equipment including flame retardant coat, helmet with face shield, gloves,
rubber boots, and in enclosed spaces, SCBA.
Protective equipment:Protective clothing and respiratory protective device.
USA
(Contd. on page 4)
Page 4/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 3)
43.0
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Prevent seepage into sewage system, workpits and cellars.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of contaminated material as waste in accordance with federal state and local regulations.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
* 7 Handling and storage
Handling:
Precautions for safe handling
Open and handle receptacle with care.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep container closed when not in use.
Keep ignition sources away – Do not smoke.
Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:Store in a cool location away from direct heat.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Store as flammable liquid.
Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
67-64-1 acetone
PEL Long-term value: 2400 mg/m , 1000 ppm
(Contd. on page 5)
USA
Page 5/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 4)
43.0
REL Long-term value: 590 mg/m , 250 ppm
TLV Short-term value: 1187 mg/m , 500 ppm
Long-term value: 594 mg/m , 250 ppm
BEI
99-97-8 N,N-dimethyl-p-toluidine
WEEL Long-term value: 0.5 ppm
Ingredients with biological limit values:
67-64-1 acetone
BEI 50 mg/L
Medium: urine
Time: end of shift
Parameter: Acetone (nonspecific)
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment (see listings below)
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Breathing equipment:
Use approved respiratory protection equipment when airborne exposure is excessive. Consult the respirator
manufacturer to determine the appropriate type of equipment for a given application. Observe respirator use
limitations specified by the manufacturer.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Material of gloves
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Face shield over protective glasses or goggles.
Safety glasses with side shields.
Tightly sealed goggles
Body protection:Protective work clothing
USA
(Contd. on page 6)
Page 6/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 5)
43.0
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Clear, light amber
Odor: Characteristic
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point: Undetermined.
Boiling point: 55 C (131 F)
Flash point: -17 C (1 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 465 C (869 F)
Decomposition temperature: Not determined.
Auto igniting: 465C (869.0F)
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Flammable limits:
Lower: 2.6 Vol %
Upper: 13.0 Vol %
Vapor pressure at 20 C (68 F):245.3 hPa (184 mm Hg)
Specific gravity at 20 C (68 F):0.791 g/cm (6.601 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined
Solubility in / Miscibility with
Water: Miscible
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: Not available
Solids content: Not available
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsForms explosive gas mixture with air.
(Contd. on page 7)
USA
Page 7/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 6)
43.0
Conditions to avoid
Heat, flames, sparks.
Exposure to high temperatures.
Direct sunlight
Incompatible materials:
Reacts with oxidizing agents.
Reacts with reducing agents.
Reacts with alkalis (bases)
Acetone reacts violently with phosphorous oxychloride.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
67-64-1 acetone
Oral LD50 5800 mg/kg (rat)
Dermal LD50 20000 mg/kg (rabbit)
Primary irritant effect:
on the skin:May irritate the skin.
on the eye:
Irritating effect.
Vapors may be irritating to the eyes.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Harmful
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
* 12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:At present there are no ecotoxicological assessments.
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 8)
USA
Page 8/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 7)
43.0
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
* 13 Disposal considerations
Waste treatment methods
Recommendation:Must be specially treated adhering to official regulations.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
* 14 Transport information
UN-Number
DOT, IMDG, IATA UN1090
UN proper shipping name
DOT Acetone
IMDG, IATA ACETONE
Transport hazard class(es)
DOT
Class 3 Flammable liquids
Label 3
IMDG, IATA
Class 3 Flammable liquids
Label 3
Packing group
DOT, IMDG, IATA II
Environmental hazards: Not applicable.
Special precautions for user Warning: Flammable liquids
Danger code (Kemler): 33
EMS Number: F-E,S-D
Stowage Category E
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: UN 1090 ACETONE, 3, II
USA
(Contd. on page 9)
Page 9/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 8)
43.0
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act):
All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements.
Proposition 65
Chemicals known to cause cancer:
99-97-8 N,N-dimethyl-p-toluidine
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
(DSL) Canada Dosmestic Substance List
All components of this product are on the DSL(Canada Domestic Substance list) or are exempt from DSL
requirements.
New Jersey Right-to-Know List:
67-64-1 acetone
New Jersey Special Hazardous Substance List:
67-64-1 acetone F3
Pennsylvania Right-to-Know List:
67-64-1 acetone
Pennsylvania Special Hazardous Substance List:
67-64-1 acetone E
Cancerogenity categories
EPA (Environmental Protection Agency)
67-64-1 acetone I
TLV (Threshold Limit Value established by ACGIH)
67-64-1 acetone A4
MAK (German Maximum Workplace Concentration)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
National regulations:
Water hazard class:Water hazard class 1 (Self-assessment): slightly hazardous for water.
(Contd. on page 10)
USA
Page 10/10
Safety Data Sheet
acc. to OSHA HCS
Printing Date 11/18/2016 Revision Date 11/18/2016Revision Number 1
Trade name: Quick-Tac 2 (Liquid)
(Contd. of page 9)
43.0
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
* 16 Other information
Although the information and recommendations set forth in this SDS are presented in good faith and are believed
to be correct as of the date of this SDS, Royal Adhesives & Sealants makes no representations as to the
completeness or accuracy thereof. Information is supplied on the condition that the persons receiving and using it
will make their own determination as to the suitability for their purpose prior to use. In no event will Royal
Adhesives & Sealants or any affiliate thereof be responsible for damages of any nature whatsoever resulting from
the use or reliance on the information set forth in the SDS.
Department issuing SDS:Environment protection department.
Creation Date:11/18/2016
Date of preparation / last revision11/18/2016 / –
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flam. Liq. 2: Flammable liquids Category 2
Acute Tox. 3: Acute toxicity Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
STOT SE 3: Specific target organ toxicity (single exposure) Category 3
STOT RE 2: Specific target organ toxicity (repeated exposure) Category 2
USA