ABOT
SAFETY DATA SHEET
Prepared in accordance with the United Stat s Hazard Commun cation
Standard:29 CFR 1910.1200 (20f2)
Rev sion date : 29-Sep-2016
Product n me:
Product code:
Synonyms:
This SDS is val d for
the following grades
Recommended use:
Restrict ons on use
Supplier:
Cabot Corporation
4400 North Point Parkway
Suite 200
Alpharetta, Georgia 30022
Un ted States
Tel: +1 678 297 1300
Emergency Telephone Number:
CAB-O-SlLG) TS-720 Fumed Silica
T5720
Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica
TS720, TS720D.
Various, Rheological control, Flow agent, Thickening agent, Glossing or matt ng agent,
Reinforcing agent in: Coat ngs, ,4dhesives and/or sealants, lnks, Silicone Elastomer,
Rubber products, Dispersion, Suspension, Cosmetics, Paints, Hygiene and sanitary
products, Other
Not Applicable.
Cabot Corporation
L57 Concord Road
Billerica, MA 01821
UNIT D STAT S
Tel: 1-978-663-3455
Fax: L-978-670-6955
24Hl7d service
Canada: CANUT C 1-613-996-6666
GERMANY: CH EM REC 0800-181-70s9
US: CHEMTR C 1-800-424-9300 or 1-703-527-3887
UK: CH MTREC: (+44)-870-8200418
lnternational CH M R C : + 1. 7 A3-7 4].-5970 or + 1-703-527 -3887
Classification,
OSHA Regulatory Statusl
Combustible dust
This chemical is considered hazardous by the United States 2012 OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Label Elements:
Page I / 12
Product code: TS720 Product name: CAB-O-S|L@ TS-720 Fumed Silica Revision date: 29-Sep-2016
Pictogram:
Signal Word:
Hazard statements:
Precautionary Statements –
Prevention
None
WARNING
May form combustible dust concentrations in air
. Keep away from all ignition sources including heat, sparks and flame
. Prevent dust accumulations to minimize explosion hazard
Hazards not otherwise classif ed {HNOC)
Do not expose to temperatures above 150’C. Hazardous products of combustion can include carbon monoxide, carbon
dioxide and formaldehyde.
Potential health effects
Principle Routes of Exposure: lnhalation, Skin Contact, Eye contact
Eye Contact: May cause mechanical irritation. Avoid contact with eyes.
Skin Contact: May cause mechanical irrit tion and skin drying. Avoid cont ct with skin. No cases of
sensitization in humans have been reported.
lnhalation Dust may be irritating to resp ratory tract. Provide appropriate exhaust ventilation at
machinery and at places where dust can be generated. See also Section 8.
lngestionl Adverse health effects are not expected. See Section 11
Carcinogenicity: Does not conta n any substances greater than 0.1% listed by IARC (lnternational Agency
for Research on Cancer), NTP (National Toxicology Program), OSHA (Occupational Safety
and Health Administration), ACGIH {American Conference for Governmental lndustrial
Hygienists) or EU (European Union). See also Section 11.
Target Organ ffects: Lungs, See Section 11
Medical Conditlons Aggravated by Asthma, Respiratory disorder
Exposure:
Potential Environmental Effects: None known. See Section 12.
Paee 2l t2
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revis on date: 29-Sep-2016
Synonyms: Siticon Dioxide, Synthetic Amorphous Silica, Pyrogenic (tumedlAmorphous Silica.
Other lnformation:
The hyphen (-) means “not applicable”
Siloxanes and Silicones, di-Me, reaction products
with silica
67762-90-7 100
FIRS AID MEASURES
Skin Contect
Eye cont ct
lnhalation
Wash thoroughly with soap and water. Seek medical attention if symptoms develop.
Flush eyes mmediately with large amounts of water for 15 minutes. Seek medical
attention if symptoms develop,
lf cough, shortness of breath or other breathing problems occur, move to fre’sh air. Seek
medical attention if symptoms persist. lf necessary, restore normal breathing through
standard first aid me sures.
lngestion Do not induce vomiting. lf conscious, 6ive several giasses of water, Never give anything
by mouth to an unconscious person.
Most import nt symptoms and effects, both acute and delaved
Symptoms The most irnportant known symptoms and effects are described in Section 2 and/or in
Section 11.
lndication of any immediate medical attention and special treatment needed
Note to physicians: Treat symptomatically
Suitable Extingu sh ng Media:
Unsuitable Extinguish ng Media
Specific hazards arising from the
chemical:
Hazardous combustion products
Protectiv equipment and
precaut ons for f iref ighters:
Risk of ust xplosionl
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Use foam, carbon dioxide {CO2), dry chemical or water spray
A fog is recommended if water is used.
DO NOT USE high pressure media which could cause formation of a potentially explosible
dust-air m xture.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Carbon monoxide (CO). Carbon dioxide (COZ). Formaldehyde.
Wear suitable protect ve equipment. ln the event of fire, wear self-contained breathing
apparatus.
Dust may form explosive mixture in air See also Section 9
Page 3 | t2
Product code: T5720 Product name.: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Personal precautions, protective equipment and emergency procedures
Personal precautions: Avoid dust formation. Remove all sources of ignition. Ensure adequate vent lation. Use
personal protective equ pment. See also Section L
For emergency responders: Use personal protection recommended in Section 8.
Environmental Precautions:
Environmental Precautions: Contain spilled product on land, if possible. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment:
Methods for cleaning up:
Prevent further leakage or spillage if safe to do so.
lf the spilled material contains dust or has the potential to create dust, use
explosion-proof vacuums and/or clean ng systems suitable for combustible dusts. Use of
a vacuum with high efficiency particulate air (HEPA) filtration is recommended. o not
create a dust cloud by using a brush or compressed air. Dry sweeping is not
recommended. Pick up and transfer to properly labelled containers. See Section 13.
Precautions for rafe handline
Advice on safe handling:
General hygiene considerations: l”landle in accordance with good industrial hygiene and safety practice
Condit ons for s fe stor ge, including any incompatibilities
Storage Cond tions
Avoid contact with skin and eyes. Avoid dust formation. Do not breathe dust. Provide
appropriate exhaust ventilation at machinery and at places where dust can be generated
o not create a dust cloud by using a brush or compressed air. Dust may form explosible
mixture in air.
Take precautionary measures against static discharges. All metal parts of the mixing and
processing equipment must be earthed/grounded. Ensure all equipment is electrically
earthed/grounded before beginning transfer operations. Fine dust is capable of
penetrating electrical equipment and may cause electrical shorts.
Keep containers tightly closed in a dry and well-ventilated place. Do not store together
with volatile chemicals as they may be adsorbed onto product. Store at ambient
conditions. Keep away from heat and sources of ignition. Keep in properly labeled
containers.
Dust deposits should not be allowed to accumulate on surfaces, as these may form an
explosible mixture if they are reieased in the atmosphere in sufficient concentrations.
None known.lncompatible mater als:
There are no exposure limits identified for this product. Exposure limits for componentsExposure guidelines:
Page 4 | t2
Product code: TS720 Product name: CA8-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-5ep-2016
are stated below.
Amorphous Silica, The retulatory Australia:
exposure limits are found under the Austria MAK
tener l silica, CAS RN 7531-86-9: Finland:
Germany TRGS 900:
lndia:
lreland:
Norway:
Switzerland:
UK W L:
US OSHA PEL:
Dust, or Particulates Not otherwise
Specffied:
z mg/mt, TWA, Respirable
4 mgfm?, TWA, lnhalable fraction
5 mg/m3
4mg/m3, TWA, lnhalable fract on
10 rng/m3, TWA
2.4mg/m3, TWA, Respirable dust
1.5 mg/m3, TWA, Respirable dust
4 mg/m3, TWA
6 mg/m}, TWA, lnhalable fraction
2.4 mg/ms, TWA, Respirable fraction
6mg/m3 (54 FR270il
10 mg/m3, TWA, lnhalable
3 mglm3 TWA, Respirable
Belgium:
China: B mg,/m3, TWA
10 mg,/m3, ST L
France: 10 mg/m3, TWA lnhaiable dust
5 mg/m3, TWA Respirable dust
Italy: 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Malaysia; 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Spain: 7o mg/m , VLA, tnhalable
3 mg/m3, VLA, Respirable
US ACGIH – PNOS: 10 mg/m , TWA, lnhalable
3 mg/m3, TWA, Respirable
US OSHA – PEL: 15 mg/m3, TWA, Total dust
5 mg/m3, TWA, Respirable
NOT
ln its facil t es globally, Cabot Corporat on manages silica to the Germany TRGS 900 occupational exposure limit of 4 mg/m3,
TWA, lnhalable fraction
MAKi M ximal Arb tsplatzk nz nff tion lMa,(lmum Worhplac concentration)
PEL: Permlsslble lxposure .lmlt
PNOS: Part culate Not Otherwise Specified
STEL: Sh rt Term Exposure Llmit
TRGS: Technische egeln fi r G fahrstoffe (Techn cal Rule for Hazardous Materialsl
IWA: Iime weighted Average
US ACGIH: Unit d St t s Amerlr n Conler nc f Govgrnm nt l lndu tr l Hygt nistg
US OSHA: Unitsd St tss occupatlonel Safety and H alth Admlnistr tion
vLA: v lore L m re Ambi ntales lEnvi onmental L mit valuel
WEL| W rkpl ce Exp sur L mit
Page 5l t2
Product code: TS72O Product name: CAB-O-SII( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Engineering Controls:
Personal protective equipment IPPEI
Respiratory Protection
Hand Protection:
Ensure adequate ventilation to maintain exposures below occupational limits. Provide
appropriate local exhaust ventilat on at machineryand at places where dustcan be
generated.
Approved respirator may be necess ry if local exhaust ventilat on is not adequate.
Wear protective gloves to prevent skin drying. Use protective barriercream be ore
handling the product. Wash hands and other exposed skin with mild soap and water
Wear eye/face protection. Wear safety glasses with side shields (or goggles).Eye/face Protection:
Skin and Body Protection Wear suitable protect ve clothing. Wash clothing daily. Work clothing should not be
allowed out of the workplace.
Other: Handle in accordance w th good industrial hygiene and safety practice. mergency
eyewash and safety shower should be located nearby.
Environmental exposure controls: ln accordance with all local legislation and permit requirements as appiicable for dusts.
Physical State: Solid Odor None under normal use. May
exhibit odor at high
temperature.
0.05 ppmAppearance:
Color:
Property
pH:
Melting pointfreezi ng poinu
Boiling point,/ boiling range:
vaporation Rate:
Vapor pressure:
Vapor ensity:
Density:
Bulk Densityr
Powder
Wh te
Values
1700’c
2230’C
2.2-2.3 g/cm1
Odor threshold:
Remarks . Method
No information available
NIOSH Pocket Guide to Chemical Hazards
NIOSH Pocket Guide to Chemical Hazards
Not Applicable
Not Applicable
Not Applicable
@20″c
No information available
According to OECD 105
No information available
Not Applicable
Bulk Powder test- Diffusion cell
Not Applicable
Not Applicable
Not Applicable
No oxidizing properties
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Specific Gravity at 20″C:
Water solubility:
Solubility(ies)r
Panition Coefficient
{n-octanol/water):
Decomposition temperature i
Viscosity:
Kinematic viscosity:
Dynarnic viscosity:
Oxidizing Properties:
Soften ng point:
VOC content (%):
% Volatile (by Volume):
% Volatile (by Weight):
2.2-2.3
Slightly soluble
> 400’c
Paee 6 / 12
Product code: TS72O Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Surface Tension:
Explosive prop rt es:
Flash Pointl
Flammability (solid, gas):
Flammability Limit in Air:
Explosion Lim ts in A r – Upper (g/m3):
Explosion L m ts in Air. Lower (g/m’):
Reactivity:
Stability:
Not Applicable
Dust may form explosible mixture in air
Not Applicable
No information available
No information available
No information available
ASTM E-l515 (MEC – Minimum Explosible Concentration)300
temperature of 450″C (the upper limit of the apparatus) met
the criteria for ignition based on temperature rise. For this
reason, the MIT was reported as > 450’C.
> = 750 ‘C ASTM E-1491; Dust cloud. Due to the low density of this
product and the volume of the dispersion vessel, testing at a
concentration above 600g/mr were unable to be performed.
For this re lson, the MAIT is reported less than or equal to
750″C. Higher concentrations may produce ignitions below
750″C. {MAIT
– Minimum Auto-lgnition Temperature}
Minimum lgnition Energy: > 1 J ASTM E2 19
lgnhion nergy: No information available
Max mum Absolute Explosion Press rel 5.22 bar ASTM E-1226 (20-LSphere Test)
MaximumRateofPressureRise: 140 bar/sec ASTME-1226{20-LSphereTest}
Burn Velocity: No information available
l(st Value: 38 ASTM E-1226 (20-L Sphere Test)
bar.meter/second
Dust xplosion Classificat onl ST1 Weak Explosion ASTM E-L226;
nd point is listed “not applicable” due to the inherent properties ofthe substance
“No information ava lable” indicates testing has not been performed
Not reactive.
Stable under recommended handling and storage conditions.
Stable up to >400″ C. No exotherm {BulkPowder test – Diffusion cell)
Possibility of hazardous reactions: None under normal processing.
Hazardous polymer rat on: Hazardous polymerization does not occur.
Conditions to avoid: Do not expose to temperatures above 150″C. Keep away from heat and sources of
ignition. Avoid dust formation.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
lncompatible materiats: None known,
Explosion data See also Section 9.
Sensitivity to Mechanical lmpact: None.
Page 7 | t2
Product code: TS720 Product name: CAB-O-SIL( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Sensitivity to Static ischarge: ust may form explosible mixture in air. Avoid dust formation. Do not create a dust cloud
by using a brush or compressed air. Take precautionary measures aga nst st t c
discharges. ,All metal parts of the mixing and processing equ pment must be
earthed/grounded. nsure all equipment is electrically earthed,/grounded before
beginning transfer operations.
Hazardous decomposition productsr Carbon monoxide (CO). Carbon d oxide (COZ). Formaldehyde
Infarmation given is bosed on data obtained from this substance or from similor substances.
Acute tox city
Oral LD50: LD50/oral/rat
‘
> 5000 mg/kg. No deaths occurred and no signs of toxicity were seen
during the observation periods after single oral administration of the substance. {O CD
423).
lnhalation LC50:
Dermal LDSO:
Skin corrosion/irritation:
Serious eye damage/eye irritation:
Sensitization:
Mutagenic tyr
Carcinogenicity
Reproductive and Developmental
Toxicity:
Due to the product’s physical characteristics, no suitable testing procedure is available
No data are available on the product itself.
Synthetic Amorphous Silica: LDS0/dermal/rabbit =
> 2000 mg/kg. Very slight transient
erythema in one animal. No signs of systemic or organ toxicity ( ECD 402).
Primary irritation index = 0.0 @ 24 hr. Not classified as an irritant (O CD 404)
Not classified as an irritant in rabl it studies (O CD 405). High dust concentr tions may
cause mechanical irritation.
No experimental animal data are available. No cases of sensitization in humans have been
reported. Conta ns no known sensitizers. May release formaldehyde when heated to high
temperatures in the presence of air. Formaldehyde is a known skin and Iung sensitizer
and is regulated as a carcinogen.
Not mutagenic in Ames test. Negative in the chromosome aberration test in Chinese
hamster ovary (CHO) cells.
No data are available on the product itself.
Synthetic Amorphous Silica: No evidence of carcinogenicity was obselved in multiple
animal species following repeated oral or inhalation exposure to amorphous silica.
Similarly, epidemiology studies show no evidence of carcinogenicity in workers who
manufacture amorphous silica.
Treated Synthetic Amorphous Silica: No evidence of cancer in rats exposed for 24 months
at 100 mg/kg/d (diet). (ECETOC JACC Report 05L – Synthetic Amorphous Silica, September
2 06).
No effects on reproductive organs have been reported in animaltoxicity studies. No
developmental effects observed on progeny in d etary study (doses of 0 or 500 rng/kg/d).
( CETOC JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Specific target organ toxicity is not expected after single oral, single inhalation, or single
dermal exposure.
STOT – single exposure:
Page I I t2
Product code: TS720 Product name: CAB-O-SILG) T5-720 Fumed Silica Revision date: 29-Sep-2016
STOT – repeated exposure:
Aspiration Hazard:
No data are avaiiable on the product itself
Treated Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat) , 5 to I weeks, no
significant treatment-related adverse effects at doses of up to 2000 mg/kg/d. ( C TOC
JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Synthetic Amorphous Silica: Repeated dose toxicity: oral {rat}, 2 weeks to 6 months, no
significant treatment-related adverse effects at doses of up to 8% silica in the diet.
Repeated dose toxicity: inhalation (rat), 13 weeks, Lowest Observed ffect Level (LOEL)
=
1.3 mg/m3 based on mild reversible effects in the lungs.
Repeated dose toxicity: inhalation {rat),
90 days, LO L
=
1 mg/mr based on reversible
effects in the lungs and effects in the nasal cavity.
Based on available dat , a STOT-RE classification is not warranted
Based on industrial experience and available data, no aspiration hazard is expected.
lnformation given is based on data obtained from this substance or from s milor substonces.
Aquatic Toxicity:
ENVIRONMENTAL FA E
Persistence and degradab lity
Bioaccumulation
Mobility:
Distribution to nv ronmental
Compartments:
Fish (Brachydanio rerio) LC50 (96 h): > 10,000 mg/l; (Method: OECD 203)
No acute toxicity to Daphnia with L and ELso ranging from >1000 to 10,000 me/L {OECD
2 2)
The rnethods for determining biodegr,adability are not applicable to inorganic substarrces
Not expected due to physicochemicat properties of the substance.
Not expected to migrate.
No information available.
Other adverse effectsl No information available.
Disclaimer: lnformation in this section pertains to the product as shipped in its intended compos tion as descr bed in Section 3
of th s SDS. Contaminat on or processing may change waste characteristics and requirements. Regulations may also apply to
empty containers, liners or rinsate. State/provincial and local regulations may be different from federal regulations. The person
generating waste must determine its proper classification
RCRA: Unused product is not a hazardous waste under U.S. RCRA, 40 CFR 261
Unused and Uncontaminated Product, as supplied, should be disposed of in accordance with the regulations issued by
Productl the appropriate federal. state and local authorities. Same consideration should be given
to containers and packaging.
Page 9 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
DOT
UN/l no
Proper Shipping Name
Hazard Class
Packing group
ICAO (airl
UN/ID no
Proper Sh pping Name
Hazard Class
Packing group
IATA
UN/D no
Proper Shipp ng Name
llarard Class
Packing group
IMDG
UN/ID no
Proper Shipping Name
Hezard Class
Packing group
RID
UN/l no
Proper Sh pping Name
Hazard Class
Packlng group
ADR
UNfl no
Proper Shipping Name
Ha ard Class
Pecklng group
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Hazard dassl cati n
Un ted St t s – OSI{A {29
CFR 1910.1100}: Hazardous
C nada – WHMIS Classification (CPR, SOR/88.66f r Not controlled
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the M/SDS
Page 10/ 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
contains all the information required by the Controlled Products Regulations
I nternatio n a I I nve ntorles
TSCA – United States Toxic Substances Control Act Section 8(b) lnventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Subst nces List
EINECS/EI|NCS – European lnventory of Existing Chemical Substances/European List of
Notif ied Chem ical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China lnventory of Existing Chemical Substances
KECI – Korean xisting and Evaluated Chemical Substances
PICCS – Philippines lnventory of Chemicals and Chemical Substances
AICS – Australian lnventory of Chemical Substances
NZIoC – New Zealand lnventory of Chemicals
TCSI – Taiwan Chemical Substance lnventory
US Federal Regulations
SARA Section 302 (40 cFR 3551 Extremely Ha ardous Substances:
No components are listed as extremely hazardous substances under SARA Section 302.
SARA 311/312Hazard C teEories
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Acute Health Hazard
Chronic He lth Hazard
Fire hazard
Sudden release of pressure hazard
Reactive Hazard
NO
NO
YES
NO
NO
SARA Section 313 [40 CFR 372] Toxics Release lnventory
oes not cont n any of the substances identified under Section 313 as toxic chemicals in excess of the de minimis
concentrations necessary to be subject to the supplier not fication requirements.
Clean Air Act Amendments of 1990
{CAA, Sect on 112,40 CFR 82):
This product does not conta n any components listed as a Hazardous ,Air Pollutant, Flammable Substance, Toxic Substance, or
Class 1 or 2 O one Depletor
CWA (Clean Water Act)
This product does not conta n any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR t22.27 and 40
cFR 122.42).
CERCI-A
This material, as supplied, does not conta n any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (C RCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act {SARA)
(40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pert n ng to releases of this material.
US State fregulat ons
California Proposition 65
This product does not contain any Proposition 65 chemicals
Page 11 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
U,S, Stafe ght-.to-Know Regulations
This product contains a listed component(s) on the Massachusetts R ght-to-Know Substances List, New Jersey Right-to-Know
List, Pennsylvania Right-to-Know List:. Silica {CAS# 7631-86-9).
Pharrnaceutical Use:
Not permitted
References
NIOSH Pocket Guide to Chemical Hazards, September 2005. ”Silica, amorphous”. DHHS {NIOSH} Publication No. 2005-149.
National Technical lnformation Service, Springfield, YA. p.277
Cont cts:
Cabot Corporation
700 E U.S. Highway 36
Tuscola, lL 61953-9643
UNITED STA ES
Tel:1-2 17-253-3370
Fax:’ 7-217-253-5530
Cabot Carbon, Ltd.
Sully Moors Road
Sully, Glamorgan C 64 5RP
Wales, UNITED KINGDOM
Telr {+44) 1446.736999 Fax:
(+441L4/,6.737t23
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNI ED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Cabot Corporation
3603 South Saginaw Road
Midland. Ml 48640
UNITED STATES
Telr 1-989-495-0030
Fax: 1-989-495-2139
Cabot GmbH
Kronenstrasse 2
79618 Rheinfelden
G RMANY
Tel (+49) 7623.707.o
Fax: {+49} 7 623.707.530
Cabot Bluestar Ltd.
Xinghuo ndustrial Ga rden
Yongxiu County, Jiujiang City 330319
Jiangxi Province, CHINA
Tel: {86-792) 3171616
Fax: {85-792} 3170320
Disclaimer;
The information set forth is based on information that Cabot Corporation believes to be accurate. No warranty, expressed or
implied, is intended. The information is provided solely for your informat on and consideration and Cabot assumes no legal
responsibility for use or reliance thereon. ln the event of a discrepancy between the information on the non- nglish document
and its English counterpart, the nglish version shall supersede.
Frepared by:
Revision date:
o
and ‘TM’ indicate trademarks of the Cabot Corporation
Cabot Corporation – Safety, Health and nvironmental Affairs
29-Sep-2016
End of Safety D t Sheet
Page L2/ t2