Rev. 02/08/2019 by: DP
6152-82ALVSE
(100386-000)
FILLED POLYURETHANE ELASTOMER
PRODUCT DESCRIPTION AND APPLICATIONS
6152-82ALVSE is a 100% solids filled two component cast urethane elastomer system. Main
applications are in construction industry for the manufacture of flexible (crown) molding.
TYPICAL PHYSICAL PROPERTIES
(for components) COMPONENT A COMPONENT B
Viscosity (filled), cps 160 40 2600 400
Specific gravity (filled), g/cm
3
1.20 0.05 1.05 0.05
Mix ratio, by weight 25 75
(for cured material) TEST METHOD RESULTS
Shore A hardness ASTM D-2240-86 82 2
REACTIVITY DATA
Gel time, minutes 4 – 6
HANDLING (STORAGE)
Component A (isocyanate) – storage area should be maintained between 75 F to 95 F. Containers must be
tightly closed as a protection from moisture and foreign material.
Component B (polyol) – storage area should be maintained between 65 F to 85 F. Containers must be
tightly closed as a protection from moisture and foreign material.
IMPORTANT NOTICE
The information contained herein is based on data believed to be accurate at the time of publication. Data
of this type should not be used for specification for fabrication and product design as it is the user s
responsibility to determine this product s fitness for a particular use.