1000 South Linwood Avenue,
Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990 Date: 08/23/2006
Revision: 11/01/2008
F 7203
Product Information
F 7203 is a high performance, water blown flexible polyurethane foam designed for processing
through plural component low or high pressure dispensing equipment. Once fully cured, this material
is tough, flexible and dimensionally stable. F 7203 is designed for use in OEM automotive and
recreational applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 400 – 600 900 -1300
Specific Gravity (gr/ml) 1.09 – 1.12 1.07-1.09
Physical Properties (Final Product)
Tensile Strength (psi), ASTM D-638 30
Elongation (%), ASTM D-638 90
Tear Strength (pli), ASTM D1004 15
Handling Characteristics
Mix Ratio by Weight (Component A/Component B) 50/50
Mix Ratio by Volume (Component A/Component B) 52/48
Cream Time (seconds) 20 – 25
Rise Time (seconds) 70 – 90
Tack Free Time (seconds) 100 – 120
Demold Time (minutes) Mold Temp Dependent
Final Cure Time (hours) 1
Density (pcf) 3.0 3.3
Storage and Shelf Life
Components A and B should be kept well sealed in a dry place at a temperature from 75 – 90oF. Shelf
life of unopened containers is six (6) months from manufacturing date. Purge opened containers with
dry nitrogen before resealing. Premix component B prior to use. Refer to product MSDS for more
information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is
accurate to the best knowledge of Eteco, Inc. The data on these sheets relates only to the specific
material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this
data. The user should conduct sufficient investigation to establish the suitability of any product for its
intended use.