25HP8203-D_TDS.pdf

Product Information
Units Test Method Results
pcf ASTM D-1622 2.8 – 3.2
psi ASTM D-1621 45 – 50
psi ASTM D-1623 < 50 psi ASTM D-273 35 - 40 % ASTM D-1623 - % ASTM D-2856 - Units Component A Component B (A/B) 50 50 (A/B) 52 48 g/mL 1.21 - 1.23 1.08 - 1.10 cPs 150 - 250 500 - 700 - Amber Opaque/Beige-ish Seconds Seconds Seconds Seconds Minutes Hours Storage and Shelf Life Packaging Component A: 500 lbNet Weight 2500 lbNet Weight Component B: 450 lbNet Weight 2250 lbNet Weight Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use. 55 gallon steel drum (closed top) 275 gallon plastic totes 55 gallon steel drum (open top) Gel Time @ 75 F Rise Time Tack Free Time Demold Time For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com www.etecoinc.com Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with dry nitrogen before resealing. Refer to product SDS for more information. 275 gallon plastic totes HP 8203 TECHNICAL DATA SHEET Rigid Foam Polyurethane System Final Cure Time 45 - 60 80 - 90 165 - 185 180 - 270 10 - 30 24 Mix Ratio by Volume Mix Ratio by Weight Viscocity @ 75 F Color Cream Time @ 75 F HP 8203 is a low density rigid polyurethane molding foam system designed for processing through plural component dispensing equipment. Once fully cured, this material is tough with high compression and tensile value. HP 8203 exhibits very good surface characteristics and excellent moldability. HP 8203 is used in a variety of applications including vessel flotation, coverings and various applications. This material is Eco Friendly due to its lack of HCFC`s, HFC`s, and lead or other heavy metals. *Properties are typical and not for specifications* Shear Strength Handling Characteristics Tensile Strength Elongation Physical Properties (Final Product) Closed Cell Content Free Rise Density Compressive Strength Specific Gravity @ 75 F