25HP8602AD_TDS.pdf

Product Information
Units Test Method Results
pcf ASTM D-1622 2.1 – 2.4
psi ASTM D-1621 20 – 25
psi ASTM D-1623 30 – 35
psi ASTM D-273 30 – 35
psi ASTM C-203 –
% ASTM D-2856 > 94
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.21 – 1.23 1.16 – 1.18
cPs 150 – 250 900 – 1000
– Amber Amber
Seconds
Seconds
Seconds
Seconds
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
HP 8602 is a High Performance, rigid polyurethane foam designed for processing through plural
component, low or high pressure dispensing equipment. Once fully cured, this material is tough with
high compression and tensile value. HP 8602 exhibits very good surface characteristics and excellent
moldability. This material is Eco Friendly due to its lack of HCFC`s, HFC`s, and lead or other heavy
metals.
*Properties are typical and not for specifications*
Shear Strength
Handling Characteristics
Tensile Strength
Flexural Strength
Physical Properties (Final Product)
Closed Cell Content
Free Rise Density
Compressive Strength
Specific Gravity @ 75 F
HP 8602
TECHNICAL DATA SHEET
Rigid Foam Polyurethane System
Final Cure Time
30 – 35
110 – 120
150 – 170
230 – 250
20 – 40
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The
data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon
this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Gel Time @ 75 F
Rise Time
Tack Free Time
Demold Time
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
275 gallon plastic totes