Product Information
Units Test Method Results
pcf ASTM D-1622 2.2 – 2.4
psi ASTM D-1621 20 – 25
psi ASTM D-1623 30 – 35
psi ASTM D-273 30 – 35
psi ASTM C-203 –
% ASTM D-2856 > 94
Units Component A Component B
(A/B) 50 50
(A/B) 53 47
g/mL 1.21 – 1.23 1.15 – 1.17
cPs 150 – 250 800 – 900
– Amber Amber
Seconds
Seconds
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging 5 gallon plastic pail 38 lbsNet Weight
Component A: 500 lbNet Weight
2500 lbNet Weight
5 gallon plastic pail 38 lbsNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
HP 8602-1 is a High Performance, rigid polyurethane foam designed for processing through plural component,
low or high pressure dispensing equipment. Once fully cured, this material is tough with high compression and
tensile value. HP 8602-1 exhibits very good surface characteristics and excellent moldability. This material is
Eco Friendly due to its lack of HCFC`s, HFC`s, and lead or other heavy metals.
*Properties are typical and not for specifications*
Shear Strength
Handling Characteristics
Tensile Strength
Flexural Strength
Physical Properties (Final Product)
Closed Cell Content
Free Rise Density
Compressive Strength
Specific Gravity @ 75 F
HP 8602-1
TECHNICAL DATA SHEET
Rigid Foam Polyurethane System
Final Cure Time
55 – 65
320 – 350
400 – 450
15 – 20
N/A
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Gel Time @ 75 F
Rise Time
Tack Free Time
Demold Time
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
275 gallon plastic totes
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.