M-3195 REV 1 A/B Page 1 of 2 Date: 11/04/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
M-3195 REV 1 A/B
95 SHORE A POLYURETHANE ELASTOMER
BJB s M Series with work times between 15 and 20 minutes is perfect for a variety of part and mold applications. These
flexible systems exhibit exceptional physical properties with a convenient mix ratio. For faster work time see our F-1 Series.
Longer work times are available in the L Series of urethane elastomers.
RoHS/REACH Compliant Phthalate Free Industrial Rollers
Bushings & Shock Absorbers Over Molding Strain Reliefs
PHYSICAL PROPERTIES TEST METHOD ELEVATED TEMPERATURE CURE*
Hardness, Shore A ASTM D2240-04e1 95 5
Density (g/cc) ASTM D792-00 1.105
Cubic Inches per Pound N/A 25.73
Color/Appearance Visual Clear Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 4,370
Tensile Modulus (psi) ASTM D412-98a(2002)e1 11,000
Elongation (%) ASTM D412-98a(2002)e1 630
Tear Strength (pli) ASTM D624-00e1 500
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.0020
Dielectric Constant, 1 MHz ASTM D150-87 4.784
Dissipation Factor, 1 MHz ASTM D150-87 0.0401
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 50
Mix Ratio by volume 100 50
Specific Gravity @ 77 F (25 C) 1.078 1.078
Color Pale Yellow Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 5,400 1,250
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 3,500
Work Time, 100g mass @ 77 F (25 C) 15 20 minutes
Gel Time 25 30 minutes
Demold Time @ 77 F (25 C) 4 6 hours
Properties above are typical and not for specifications.
CURE SCHEDULE/HEAT CURING:
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
M-3195 REV 1 A/B Page 2 of 2 Date: 11/04/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed curing
temperature of 200 F (93 C).
PREPARATION AND RELEASING:
When M-3195 REV 1 A/B is used to produce molds or parts from plaster, wood or other porous substrates, we would first recommend that
they be sealed. Release agents may then be applied over the sealed surface.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the cured
physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color
stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help
slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
NOTE:
Prolonged direct exposure to sunlight can affect the surface of this product. Cover molds or other products when storing outdoors.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments, mold
releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more information.
STORAGE:
Store ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 1 lb. 77
Gallon Kits 8 lbs. 4 lbs. 309
5-Gallon Kits 40 lbs. 20 lbs. 1,544
55-Gallon Drum Kits 440 lbs. 220 lbs. 16,982
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the
skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling
this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended to
remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if allergic
reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed by
medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which are known to the State of California to
cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
M-3195 REV 1 A/B Page 1 of 2 Date: 11/04/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com