PC-10 Page 1 of 2 Date: 05/10/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
PC-10 A/B
A CURATIVE POLYURETHANE GEL
PC-10 A/B is a low viscosity, 15 Shore A polyurethane gel system originally designed as a re-enterable encapsulant for a variety of
electronic potting applications. It features excellent wetting and penetration properties. PC-10 A/B is easily re-enterable by hand or
tools.
Resists moisture absorption and is moisture insensitive
during handling
Non-foaming
Does not contain MOCA, MDA, or TDI
Non-corrosive and compatible with electrical
components
Very easy to use Cures at room temperature
PHYSICAL PROPERTIES TEST METHOD TEST RESULTS
Hardness, Shore A ASTM D2240 10 5
Density (g/cc) ASTM D792 0.95
Color/Appearance Visual Translucent Pale Yellow
Shrinkage (% by volume) 0.2
Water Resistance (% weight change) 30 days & 77 F (25 C) + 0.2
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 50 100
Specific Gravity @ 77 F (25 C) 1.02 0.91
Color Pale Yellow Colorless
Mixed Viscosity of A/B (cps) @ 77 F (25 C) Brookfield 150
Work Time of A/B, 100g mass @ 77 F (25 C) 5 10 minutes
Demold Time @ 77 F (25 C) 3 hours
Properties above are typical and not for specifications.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
PC-10 Page 2 of 2 Date: 05/10/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
PACKAGING Part A Part B
Quart Kits 1 lb. 2 lbs.
Gallon Kits 4 lb. 8 lbs.
5-Gallon Kits 20 lbs. 40 lbs.
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS :
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl
esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.
Refer to the Material Safety Data Sheet before using this product.
Handling Guide