SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.