SAFETY DATA SHEET
Date Prepared : 1/20/2015
SDS No : SC-24
SC-24
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SC-24
GENERAL USE: Polyurethane catalyst
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
Not a dangerous substance according to GHS.
GHS LABEL
Not Applicable
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Pale yellow liquid with mild odor.
IMMEDIATE CONCERNS: Avoid eye and skin contact. Avoid breathing vapors. May cause eye and skin irritation. Use in well ventilated
areas.
POTENTIAL HEALTH EFFECTS
EYES: May cause eye irritation.
SKIN: May cause skin irritation.
INGESTION: Low oral toxicity.
INHALATION: May cause respiratory irritation.
MEDICAL CONDITIONS AGGRAVATED: None Known
ROUTES OF ENTRY: Eye and skin contact, inhalation of vapors, or accidental ingestion.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich 30 – 6068515-49-1
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes.
Get medical attention if irritation develops.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if irritation or rash
develops. Wash clothing before reuse.
INGESTION: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the
patient is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. Seek medical attention if breathing becomes difficult or if respiratory irritation develops.
Page 1 of 5
NOTES TO PHYSICIAN: Symptomatic and supportive therapy as needed. Following severe exposure medical follow-up should be
monitored for at least 48 hours.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical, or water fog.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide, and metal oxides.
FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not
release runoff from fire control methods to sewers or waterways.
FIRE FIGHTING EQUIPMENT: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of
unmanned hose holders or monitor nozzles for fighting large fires.
SENSITIVE TO STATIC DISCHARGE: This material can accumulate static charges which can cause an incendiary electrical discharge.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Eliminate sources of ignition. Evacuate the area. Clean-up should only be performed by trained personnel. People dealing
with a major spill should wear full protective clothing including appropriate respiratory protection. Prevent product spill from entering sewers
or waterways. Neutralize small spills with a decontaminant.
LARGE SPILL: Contain and absorb large spills onto an inert, non-flammable adsorbent carrier (such as earth or sand). Do not use
combustible materials such as saw dust. Use only spark resistant and explosion proof recovery devices. Shovel into open-top drums or plastic
bags for further decontamination, if necessary. Wash the spill area clean with a liquid decontaminant. Remove and properly dispose of
residues. Notify applicable government authorities if release is reportable. (See CERCLA in Section 15).
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Do not discharge into drains or rivers.
GENERAL PROCEDURES: Refer to section 8 of SDS for personal protection details.
RELEASE NOTES: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if
necessary.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over
open containers. Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
HANDLING: Use in a well ventilated area. Avoid heat, sparks, and open flames. Avoid breathing vapor and contact with eyes, skin, and
clothing. Use appropriate personal protective equipment as specified in Section 8. Handle and use in a manner consistent with good
industrial/manufacturing techniques and practices.
STORAGE: Store in a dry and well-ventilated place, away from excessive heat in the original or similar container. Avoid sources of ignition
and incompatible materials. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials. Avoid
unnecessary contact.
STORAGE TEMPERATURE: 65-80 F (18-27 C)
SHELF LIFE: 12 months from date of shipment under manufacturers recommended storage conditions.
ELECTROSTATIC ACCUMULATION HAZARD: This material can accumulate static charges which can cause an incendiary electrical
discharge. Use proper bonding and/or grounding procedure.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Page 2 of 5
SC-24
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV Supplier OEL
Chemical Name ppm mg/m
3
ppm mg/m
3
ppm mg/m
3
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl
esters, C10-rich
TWA NE NE NE NE NE 5
STEL NE NE NE NE NE NE
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
SKIN: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be used to prevent contact with
eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer maximum protection.
RESPIRATORY: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may be
necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
PROTECTIVE CLOTHING: Protective clothing should be selected and used in accordance with ‘Guidelines for the Selection of Chemical
Protective Clothing’ published by ACGIH.
WORK HYGIENIC PRACTICES: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in
immediate work area should be prohibited. Wash hands before eating.
OTHER USE PRECAUTIONS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Training is important. Follow all label precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Mild
COLOR: Pale yellow
pH: Not Applicable
PERCENT VOLATILE: 27
FLASH POINT AND METHOD: > 110 C (230 F) Pensky-Martens CC
VAPOR PRESSURE: Not Established
VAPOR DENSITY: Not Established
BOILING POINT: Not Established
SOLUBILITY IN WATER: Negligible
SPECIFIC GRAVITY: 1.037 (water=1) at 25 C (77 F)
VISCOSITY #1: 215 Centipoise at 25 C (77 F)
(VOC): < 280.000 g/l Calculated. Theoretical VOC minus water and exempt solvents.
10. STABILITY AND REACTIVITY
REACTIVITY: Hazardous reactions will not occur under normal transport or storage conditions.
HAZARDOUS POLYMERIZATION: Product will not undergo polymerization.
STABILITY: This product is stable under normal ambient conditions of temperature and pressure.
CONDITIONS TO AVOID: Heat, flames, and ignition sources.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, and metal oxides.
Page 3 of 5
SC-24
INCOMPATIBLE MATERIALS: Strong oxidizing agents.
11. TOXICOLOGICAL INFORMATION
ACUTE
Chemical Name ORAL LD50 DERMAL LD50
INHALATION
LC
50
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich > 10 g/kg > 3.16 g/kg > 0.13 mg/l
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: No data available
ECOTOXICOLOGICAL INFORMATION: No specific ecological data are available for this product. Refer to Section 6 for information
regarding accidental release and Section 15 for regulatory reporting information.
BIOACCUMULATION/ACCUMULATION: No data available
DISTRIBUTION: No data available
CHEMICAL FATE INFORMATION: No data available
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain
some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via
a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements
of environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material
and runoff and contact with soil, waterways, drains and sewers.
EMPTY CONTAINER: Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without
proper instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. DO NOT
PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. T HEY MAY EXPLODE AND CAUSE INJURY OR DEATH.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION): Not Regulated
AIR (ICAO/IATA): Not Regulated
VESSEL (IMO/IMDG): Not Regulated
COMMENTS: Not dangerous according to transport regulations.
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZ ATION ACT)
311/312 HAZARD CATEGORIES: None
313 REPORTABLE INGREDIENTS: This product contains the following substances subject to the reporting requirements of Section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
None
CERCLA (COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPE NSATION, AND LIABILITY ACT)
CERCLA REGULATORY: For this/these chemicals, release of more than the Reportable Quantity to the environment in a 24-hour
period requires notification to the National Response Center (800-424-8802 or 202-426-2675):
None
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA REGULATORY: This product contains chemical(s) subject to TSCA Section 12(b) export notification:
None
Page 4 of 5
SC-24
TSCA STATUS: This product or its components are listed in or exempt from the TSCA inventory requirements.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA )
29 CFR1910.119—PROCESS SAFETY MANAGEMENT OF HIGHL Y HAZARDOUS CHEMICALS: None of the chemicals in
this product are considered highly hazardous by OSHA.
CALIFORNIA PROPOSITION 65: This product contains chemical(s) which are known to the State of California to cause cancer, birth
defects or other reproductive harm, and may be subject to the requirements of California Proposition 65 (CA Health & Safety Code
Section 25249.5):
Chemical Name Wt.% Listed
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich 30 – 60Developmental Toxicity
OSHA HAZARD COMM. RULE: The contents of the SDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS (WORKPLACE HAZARDOUS MATERIALS INFORMATION SY STEM): This product has been classified according to the
hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
WHMIS CLASS: Does not meet criteria.
DOMESTIC SUBSTANCE LIST (INVENTORY): All components in this product are listed in or exempted from the Domestic
Substances List (DSL) or the Non-Domestic Substances List (NDSL).
GENERAL COMMENTS:
DIDP RESTRICTIONS: This product contains diisodecyl phthalate (DIDP), CAS# 68515-49-1 EINECS# 271-091-4. In the U.S., there is an
interim prohibition on DIDP above 0.1 percent by weight (one thousand parts per million) in toys intended for children age 12 and under that
can be placed in a child’s mouth and child care articles for children age 3 and under [H.R. 4040, The Consumer Safety Improvement Act of
2008]. In the EU, DIDP shall not be used as substance or as constituents of preparations, at concentrations of greater than 0.1 percent by
weight (one thousand parts per million) of the plasticized material, in toys and child care articles which can be place in the mouth by children.
Such toys and child care articles containing DIDP in concentrations greater than the limit mentioned above shall not be placed on the market
[Directive 2005/84/EC].
16. OTHER INFORMATION
REASON FOR ISSUE: New Issue
Date Prepared: 1/20/2015
HMIS RATING
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA CODES
1
1 0
HMIS RATINGS NOTES: Personal Protection: See Section 8
MANUFACTURER DISCLAIMER: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc.
assumes no legal responsibility for use or reliance upon this data.
Page 5 of 5
SC-24