25SPLH4060-D_TDS.pdf

Product Information
Units Test Method Results
Shore D ASTM D-2240 65 +/- 3
psi ASTM D-412 5,200
psi ASTM D-412 –
% ASTM D-412 70
pli ASTM D-624 180
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.17 – 1.19 1.07 – 1.09
cPs 500 – 700 900 – 1300
Visual Pale Yellow Opaque/White
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490 lbNet Weight
Component B: 435 lbNet Weight
Physical Properties (Final Product)
SPL-H 4060
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 4060 is a high-performance, multi-purpose, polyurethane coating designed for processing
through plural component, high-pressure dispensing equipment. Once fully cured, this material is
tough, flexible, and has high impact and tear resistance. SPL-H 4060 exhibits good weather
resistance and gloss retention. Contact an Eteco, Inc. representative for specific material compatibility,
immersion service suitability and substrate preparation.
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Tensile Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc.
The data on thes e s heets rel ates onl y to the s pec i fi c materi al des i gnated herei n. Etec o, Inc . as s umes no l egal res pons i bi l i ty for us e or rel i anc e
upon this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
Tack Free Time 25
90% Cure Time* 24
Color
Gel Time @ 130 F to 150 F 10 – 15
Handling Characteristics
Mix Ratio by Volume