25SPLH4072AD_TDS.pdf

Product Information
Units Test Method Results
Shore D ASTM D-2240 70
psi ASTM D-412 6,800
psi ASTM D-412 375,000
% ASTM D-412 5
pli ASTM D-624 180
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.16 – 1.18 1.06 – 1.08
cPs 400 – 600 900 – 1300
Visual Pale Yellow Opaque/White
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490 lbNet Weight
Component B: 435 lbNet Weight
Physical Properties (Final Product)
SPL-H 4072
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 4072 is a 100% solids high-performance, multi-purpose polyurethane coating designed for processing
through plural component, high-pressure dispensing equipment. Once fully cured, this material is tough and
hard with excellent tensile strength with moderate impact resistance. SPL-H 4072 was designed to be
sprayed over EPS and Urethane Board stock. SPL-H 4072 is also an excellent product to replace Polyester
Resins and Fiberglass.
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Flexural Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is
six (6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers
with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
Tack Free Time 100 – 120
90% Cure Time* 24
Color
Gel Time @ 75 F 80 – 90
Handling Characteristics
Mix Ratio by Volume