Introduction
CDM Fabric is made of two layers of input roving which is laid down at precise warp and weft angles with backing
mat. The input roving varies according to different specification. It’s a high performance fabric compatible with many
resin systems
It’s widely used in hand lay-up, pultrusion, RTM process
for various industries such as: vessels, boats, containers, aircraft, 0 / 90
automotive parts, wind blades,sport equipment, tanks & pipes, panels, etc
Features
High mechanical strength, high impact reponse, fast wet-out
Better surface finish, excellent laminate properties
Product & Specification
Test Standard Tolerance
(oz./sq.yd)(g/sq.m) %
413yield (1200tex) ISO 3374 9.73 330 5
550yield (900tex) ISO 3374 7.96 270 5
207yield (2400tex) ISO 3374 8.11 275 10
Polyester 83 Denier ISO 3374 0.29 10 5
ISO 3374 26.10 885 7
Physical propertyTest Standard control data
Basic weight ISO 3374 5%
ISO 3344 0.2%
ISO 1887 0.4% -4.0%
Tech. Parameter & Package
It’s wrapped with plastic film and packed in carton. Both large roll and standard roll available:
Roll Type:Standard Roll
Roll Width:50″ / 1270mm
Roll Weight:110.2 lb / 50kg
Roll Length:48.7 yd /44.5m
16 ctn/plt, 1763lb/plt, (800kg)
12 ctn/plt, 1322lb/plt, (600kg)
Storage:
Stored under dry, cool condiction. Temperature and humidity to be 15 – 35 and 35% – 65%.
The fiberglass materials should remain in good package before being used.
CDM1808
S203
178.6 lb / 81kg
78.7 yd / 72m
Package:
9 ctn/plt, 1607lb/plt, (729kg)
6 ctn/plt, 1071lb/plt, (486kg)
chopped mat
polyester stitch
Total Weight
Moisture content
Ignition Loss
50″ /1270mm
Large Roll
Architecture Yield Input Area Weight
Warp 0
Weft 90
(800) 281-4975
sales@revchem.com
