SAFETY DATA SHEET
Issue date: 2007-01-25 Revised: 2011-04-15 Revision: 3 Page 1(4)
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF
THE COMPANY
Product name:
DIVINYCELL F 40
D
IVINYCELL F 50
D
IVINYCELL F 75
D
IVINYCELL F 90
D
IVINYCELL F130
Supplier: DIAB, Inc FST Division
8700 Autobahn Drive
Dallas, Texas 75237-3934
Contact: Infotrac
1-800-535-5053
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS NO CONTENT
Polyether sulfone (PES) 25608-63-3 > 99%
These materials are rigid polymeric foams made from PES polymer.
3. HAZARDS IDENTIFICATION
Polyether sulfone is deemed non-hazardous as defined by OSHA Hazard Communication
Standard (29 CFR1910.1200).
None of the components in the polymer at are listed as a carcinogen.
4. FIRST-AID MEASURES
Inhalation: No fumes or inhalation hazard at normal use temperatures
Skin contact: Foam is not irritating to skin.
Tel +1 (972) 228-7600
Fax +1 (972) 228-2667
E-mail:info@us.diabgroup.com
Web Site: www.diabgroup.com
SAFETY DATA SHEET
Divinycell F Issue date: 2007-01-25 Revised: 2009-07-31 Revision: 2 Page 2 (4)
Eye contact: Exposure to dust from cutting operations may cause irritation.
Flush with water to remove particles from eyes.
Ingestion: Material is non-toxic.
5. FIRE-FIGHTING MEASURES
Flammability:
Flashpoint: Oxygen index > than 30% (ASTM D2863)
Self Extinguishing (ASTM 1692)
Auto-ignition 580 – 600
C
Lower Explosive Limit: Not Applicable.
Upper Explosive Limit: Not Applicable.
Hazardous Combustion Products: Carbon monoxide at > 400
C.
Unusual Fire and Explosion Hazards: Self Extinguishing (ASTM 1692)
Extinguishing Media: Water, dry chemical, foam, or carbon dioxide.
Fire Fighting Procedures: Use MSHA/NIOSH approved breathing apparatus
and protective gear. Can produce carbon monoxide if burned.
6. MEASURES TO TAKE IN THE EVENT OF ACCIDENTAL LEAKAGE
Spills: Not Applicable (Solid Foam form)
7. HANDLING AND STORAGE
Dust can be produced during mechanical process. Use local dust collection system.
No explosion proofing or other special requirements necessary.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exhaust ventilation and dust collection may be required for sawing or other processing
generating dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: White to light tan solid polymeric foam
Odor: None
Melting point: 320 C
Boiling point: Not applicable
Tel +1 (972) 228-7600
Fax +1 (972) 228-2667
E-mail:info@us.diabgroup.com
Web Site: www.diabgroup.com
SAFETY DATA SHEET
Divinycell F Issue date: 2007-01-25 Revised: 2009-07-31 Revision: 2 Page 3 (4)
Density at 20 C : 40-250 Kg/m3
Water solubility (20 C) : Insoluble
10. STABILITY AND REACTIVITY
Conditions to avoid: Temperature: > 400 degrees Celsius
Substances to avoid: acids, bases, strong oxidizing agents
Decomposition products: Hazardous decomposition products: carbon monoxide, Gaseous products of degradation can be
given off if the material is greatly overheated.
Thermal decomposition: > 400 C
Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Based on the information available, no adverse health effects are expected if handled as
recommended with suitable precautions for designated uses.
12. ECOLOGICAL INFORMATION
Biodegradation: This material is inert and non-degradable.
Environmental toxicity: None known
Recyclability: Material very stable to recycle processing.
13. DISPOSAL CONSIDERATIONS
Polyether sulfone is not a RCRA hazardous waste.
State and local regulations should be consulted before disposal of large amounts of any
solid waste.
14. TRANSPORT INFORMATION
Department of Transportation (DOT) : Not Regulated
International Civil Aviation Organization (ICAO) : Not Regulated
Maritime (IMDG) : Not Regulated
Tel +1 (972) 228-7600
Fax +1 (972) 228-2667
E-mail:info@us.diabgroup.com
Web Site: www.diabgroup.com
SAFETY DATA SHEET
Divinycell F Issue date: 2007-01-25 Revised: 2009-07-31 Revision: 2 Page 4 (4)
Tel +1 (972) 228-7600
Fax +1 (972) 228-2667
E-mail:info@us.diabgroup.com
Web Site: www.diabgroup.com
TGS Class (Canada) : Not Regulated
15. REGULATORY INFORMATION
OSHA 29 CFR 1910.1200 : Not hazardous
SARA Title III hazard Classification : Not subject to reporting requirements
TSCA : All non-polymer ingredients of these materials are listed in the Inventory.
16. OTHER INFORMATION
HMIS Rating:
Health: 0
Flammability: 0
Reactivity: 0
REACH (Registration, Evaluation, and Authorization of Chemicals) regulation for chemical
substances entered into force in the European Union, on 1 June 2007 (EG 1907/2006).
Products are only affected by REACH regulation if they contain dangerous substances or
contain substances intended to be released from the product during normal use.
DIVINYCELL F foams are products that do not contain dangerous substances and have no
substance intended to be released during normal use and is consequently not regulated by
REACH.
The information contained in this safety data sheet corresponds with our actual knowledge
and experience. It is the user s responsibility to determine the conditions for safe use of this
product and consider laws and regulations.