27GM900_TDS.pdf

FIBERTEC
Final determination of the suitability of the material for the use contemplated is the sole
responsibility of the user. No warranty is expressed or implied, and the manufacturer s only
obligation shall be to replace such quantity of the product proven to be defective.
Microglass milled fibers are E-glass filaments.
Microglass is used as reinforcement in composites to increase mechanical properties (impact,
tensile, compressive and flexural), improve dimensional stability and minimize distortion at
elevated temperatures.
Fiber Diameter 16 microns
Fiber Length 230 microns
Aspect Ratio 13:1
Bulk Density 0.78 g/cc
Moisture Content < 0.1% Loss on Ignition < 0.08% Contamination Free of foreign matter, dirt, oil or grease, and hard lumps of nodulated and/or unmilled fibers Color White to off-white Sizing Cationic Appearance Powdery Reinforcing the plastics industry 35 Scotland Boulevard Bridgewater, MA 02324 508-697-5100 Fax 508-697-7140 www.fibertecinc.coml l l l PRODUCT SPECIFICATION MICROGLASS 7232 SPECIFICATIONS AVERAGE VALUE DESCRIPTION PRIMARY USE