Rev.: 6/10/22
Property Test Method Units 5848 Q Ply 8lb 1.0
Thickness
—
—
(in) 1.03
Areal weight (lb/ft
2
) 1.39
Flexural modulus
ASTM D7249/D790
(psi) 468,000
Flexural Strength [22in Support Span] (psi) 179.2
EI (Flexural Rigidity) [22in Support Span] (lbf*in
2
) 128,000
Compressive Strength
ASTM C365
(psi) 868.5
Compressive Modulus (psi) 44,000
Screw Pull Force Through (Partial) Polystrand Internal (lbf) 342 (186)
Key Characteristics
Technical Property Comparison of Composite Panels
Product description
Polystrand Composite Panel is a thermoplastic sandwich panel, consisting of PET closed-cell foam and fibre-glass
reinforced PET face-sheets, which are uniformly joined by a lamination/melting process
Below is Limited Technical Data for Polystrand with the construction: 5848 Quad Ply 8lb 1in PET Panel
Hammerhead : 5848 Quad Ply 8lb 1.0in PET Panel
Continuous Glass-Reinforced Thermoplastic PET Composite Panel
NOTE:
The data listed herein reflect typical panel properties. They are the latest available at the time of publication and are reliable to the best knowledge of
Avient. The properties are listed solely to give general guidance and are not to be construed as a warranty or representation for of this information or the
safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety
and suitability of each such product or product combination for their own purposes. We sell the products without warranty. Buyers and users assume all
responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.
The technical data sheet is titled Preliminary due to the small population of data for this newly released tape.
Copyright 2017, PolyOne/Avient Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the
Information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the
information. Some of the Information arises from laboratory work with small-scale equipment which may not provide a reliable indication of
performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state
minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause
material properties to shift from the values stated in the Information. PolyOne makes no warranties or guarantees respecting suitability of either
PolyOne s products or the Information for your process or end-use application. You have the responsibility to conduct full-scale end-product
performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information and/or use
or handling of any product. POLYONE/AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected
by the Information. This data sheet shall NOT operate as permission, recommendation, or inducement to practice any patented invention without
permission of the patent owner.