(Specifications subject to change without notification.)
No. TP-N758
Date: 05-Oct-18
Supersedes: na
Page: 1 of 2
CUSTOMER
ACCEPTANCE
STANDARD
CONFORMAT N758 and N758 XS REINFORCING MAT
I. DESCRIPTION
Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable
making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer
Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra
surface veil, N758XS provides an outstanding surface finish.
II. BINDER SYSTEM
Can be produced with any of Superior s binder systems.
III. VISUAL APPEARANCE
This product is a white in color, highly consistent continuous filament glass fiber mat, supplied
in rolls with trimmed edges. Each roll is significantly free of tears, holes, dirt, grease, foreign
materials and non-uniform glass clumps or strands.
IV. SPECIFICATIONS
A. IMPERIAL
Weight per Sq. Ft.
Production Range
Roll Width
Production Range
Roll Length
Production Range
Roll Diameter
Production
Range
Nominal Binder
Production Range
0.50 oz. to 2.00oz 15″ to 96″
200′ to 450′ Based
on Ounce Weight
18″ to 22″ Based
on Ounce Weight
5% Based on
Process
Requirements
TOL (+/- 15%) TOL (+/- .125″) TOL (+/- 50′) TOL (+/- 2″) TOL (+/-2%)
B. METRIC
Weight per Sq. M.
Production Range
Roll Width
Production Range
Roll Length
Production Range
Roll Diameter
Production
Range
Nominal Binder
Production Range
154g to 614g 381mm to 2438mm
61m to 137m Based
on Gram Weight
457mm to
559mm Based
on Gram Weight
5% Based on
Process
Requirements
TOL (+/- 15%) TOL (+/- 3.2mm) TOL (+/- 15.2m) TOL (+/- 50mm) TOL (+/-2%)
*Weight per sq ft is the calculated average for each roll.
** Widths of 2 14 available upon request with additional slitting charge.
***Binder percentage of total condensed mat before oven cure.
(Specifications subject to change without notification.)
No. TP-N758
Date: 05-Oct-18
Supersedes: na
Page: 2 of 2
CUSTOMER
ACCEPTANCE
STANDARD
C. EXTRA SURFACE OPTION:
CONFORMAT N758XS is produced with an additional SURMAT type veil on one
surface in turn enhancing the surface quality of the finished part. It has the additional
advantage of lowering the process costs by reducing the layers of mat material
handled during pattern cutting or loading of molds by giving you two products in one.
An additional price will apply. The weight of the additional surface product is included
in the weight per square foot (or SQM).
D. PACKAGING
All mats are wound onto (4 ) I.D. (10.2cm) heavy duty cardboard cores. Each roll is
individually contained within a polyethylene sleeve, placed on a 44″ x 45 x 3.5
(11.00cm x 11.25cm x 8.89cm) wooden pallet and stretch wrapped for protection
during shipment. Typically there are four to six (4-6) rolls per skid. Material 36-inch
(91.4cm) wide or less may be double stacked on a skid.
Optional packaging methods are available. Additional charges may apply.
A. Three (3) inch I.D. (7.62cm) heavy duty cardboard core.
B. Cardboard box and skid.
C. Vacuum packaging for 10% space reduction.
D. Cardboard box, vinyl band with stretch wrap on skid.
E. Other methods available upon request.
Each roll is individually marked with product designation, roll number, roll width, roll
length and roll weight.
E. STORAGE
For best performance results, it is recommended that SHC products are stored at
temperatures between 10 C and 35 C at relative humidity below 85%.
SHC Products should remain in the original packaging materials until just prior to use.
F. WARRANTY
See Superior’s Terms and Conditions documentation.