Lantor Soric
TF
The cost effective solution for closed mould processes
Is used as core material, infusion medium and/or print
blocker
Is a pressure stable polyester nonwoven and compatible
with all regular types of resins, including Polyester,
Vinylester, Phenolic and Epoxy
Is suitable for closed mould processes, including Infusion,
RTM Light, RTM Heavy
Applications Lantor Soric
TF
Marine: hulls, decks and structures of boats and yachts
Transportation: parts and panels of cars, trailers,
trucks and RV s
Mass transit: interior and exterior of trains, light rail
and buses
Leisure: kayaks, surfboards, pools and tubs
Industrial: cladding panels, fans, containers and tanks
Wind Energy: nacelle covers and spinners
Soric
TF
Datasheet
The information contained in this document has been compiled in good faith by
Lantor BV, but nevertheless no representation or warranty is given as to the accuracy
or completeness of the (technical) information provided herein. Lantor BV can not
be held liable of any damages arising from any (printing) errors or omissions in
this information. Lantor BV reserves the right to make changes with respect to the
information provided at any time without further notice.
Composites
Information
Verlaat 22 – 3901 RG
Veenendaal – The Netherlands
t +31 (0)318 537 111
e composites@lantor.com
enabling performance
www.lantorcomposites.com
V2 05.2024
Properties TF 1.5 TF 2 TF 3
Thickness
mm 1,5 2,0 3,0
Thickness loss at 0,8 bar %<25 <25 <25
Roll length m12 0 80 50
Roll width m1,27 1,27 1,27
Max processing temperature C 170 170 170
Dry weight g/m 90 12 0 160
Resin uptake kg/m 0,8 1,0 1,4
Density impregnated kg/m 700 700 700
Mechanical properties* unitvaluetest method
Flexural strength
MPa 19 ASTM D790
Flexural modules MPa 1500 ASTM D790
Tensile strength across layers MPa 7 ASTM C297
Compression strength: 10% strain MPa 4 ISO 844
Shear strength MPa 7 ASTM C273-61
Shear modules MPa 34 ASTM C273-61
* Typical mechanical properties of Lantor Soric
TF 2 impregnated with unsaturated polyester resin