PRODUCT DATASHEET
For more information and technical assistance contact Phillips 66 COPYLENE
Polypropylene at www.COPYLENE.com.
COPYLENE
CR350CS-01
Random Copolymer
Potential Applications: Product Description
COPYLENE
CR350CS-01 is a clarified, reactor grade, random
copolymer specially designed for clear injection molding appli-
cations and is formulated with lube for excellent mold release
for larger articles.
Typical Properties Method Value Unit
Physical
Melt Flow Rate (230 C/2.16kg) ASTM D 1238 35 g/10 min
Density Specific Gravity ASTM D 792 0.902 sp gr
Mechanical
Tensile Strength @ Yield
(2 in/min)
(50 mm/min)
ASTM D 638
4250 psi
29.3 MPa
Flexural Modulus
(0.05 in/min, 1% Secant, Procedure A)
(1 mm/min, 1% Secant, Procedure A)
ASTM D 790
155000 psi
1068 MPa
Tensile Elongation @Yld ASTM D 638 13.5%
Impact
Notched izod impact
(73 F, Method A)
(23 C, Method A)
ASTM D 256
1.0 ft-lb/in
53 J/m
DTUL @66psi Unannealed ASTM D 648 74 C
Product Properties
For regulatory compliance information, see COPYLENE
CR350CS-01 Product Stewardship Information Sheet. MSDS available upon request, or on our Web site at
www.COPYLENE.com. The product specifications are nominal properties and do not reflect normal testing variance and should not be used for specification
purposes.
Revision Date November 2012
COPYLENE
Injection Molding
CSB 12-3120
Before using this product, the user is advised and cautioned to make its own determination and assessment of
the safety and suitability of the product for the specific use in question and is further advised against relying on
the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility
of the user to ensure that the product is suited and the information is applicable to the user s specific application.
Phillips 66 Company does not make, and expressly disclaims, all warranties, including warranties of merchant-
ability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly
arising from any usage of any trade or from any course of dealing in connection with the use of the information
contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract,
tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, in-
formation contained herein is given without reverence to any intellectual property issues, as well as federal, state
or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
PHILLIPS 66
, PHILLIPS 66
Shield, COPYLENE
and other trademarks displayed herein are registered trademarks of Phillips 66
Company or one of its subsidiaries.