STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixtures
Trade name : STYROSAFE LAMINATING RESIN
CAS-No. : mixture
Product code : 30P-106A
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : LAMINATING RESIN FOR EPS
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vapor
Acute toxicity (inhalation)
Category 4
H332 Harmful if inhaled
Skin corrosion/irritation
Category 2
H315 Causes skin irritation
Serious eye damage/eye
irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category
1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2 H351 Suspected of causing cancer
Reproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn child
Specific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritation
Specific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic life
Full text of H statements : see section 16
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 2/11
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H402 – Harmful to aquatic life
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 3/11
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin
(CAS-No.) TRADE SECRET <= 72 Not classified
2-hydroxyethyl methacrylate, stabilized
(CAS-No.) 868-77-9 <= 22 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
styrene, inhibited
(CAS-No.) 100-42-5 <= 11 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.5 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible). IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor/physician if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh
air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Call a
poison center/doctor/physician if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below. Flammable liquid
and vapor.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 4/11
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so.
Take precautionary measures against static discharge. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Ground/bond container and
receiving equipment. Flammable vapors may accumulate in the container. Use explosion-proof
equipment. Wear personal protective equipment. Do not breathe
dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool. Store locked up.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 5/11
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIH ACGIH STEL (ppm) 40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Not applicable
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. Wear respiratory
protection
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 64 C
Flash point : < 30 - 34 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : 1.1
Solubility : No data available
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 6/11
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapor.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Inhalation: Harmful if inhaled.
STYROSAFE LAMINATING RESIN (mixture)
ATE US (gases) 4500.000 ppmV/4h
ATE US (vapors) 11.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000.000 mg/kg body weight
ATE US (dermal) 2820.000 mg/kg body weight
ATE US (gases) 2770.000 ppmV/4h
ATE US (vapors) 12.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129.000 mg/kg body weight
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 7/11
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LD50 oral rat 5564 mg/kg body weight (Rat; Experimental value)
LD50 dermal rabbit > 5000 mg/kg (Rabbit; Experimental value)
ATE US (oral) 5564.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status 3 – Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure : May cause respiratory irritation.
Specific target organ toxicity repeated
exposure
: Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Harmful to aquatic life.
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LC50 fish 1 227 mg/l (LC50; 96 h)
EC50 Daphnia 1 171 mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
EC50 Daphnia 2 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
Threshold limit algae 1 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 8/11
12.2. Persistence and degradability
STYROSAFE LAMINATING RESIN (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the
soil.
12.3. Bioaccumulative potential
STYROSAFE LAMINATING RESIN (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (BCF)
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
BCF fish 1 1.3 - 1.5 (BCF)
Log Pow -0.55 - 0.49
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
Log Koc Koc,352; Estimated value; log Koc; 2.55; Estimated value
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Effect on the global warming : No known effects from this product.
GWPmix comment : No known effects from this product.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 9/11
Additional information : Handle empty containers with care because residual vapors are flammable. Flammable vapors
may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) : RESIN SOLUTION
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
Hazard labels (DOT) : 3 - Flammable liquid
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 10/11
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
Yes No No No 0.1 g/day
styrene, inhibited (100-42-5)
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information : None.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 11/11
Full text of H-phrases:
---
---
H226 Flammable liquid and vapor
---
---
H315 Causes skin irritation
---
---
H317 May cause an allergic skin reaction
---
---
H319 Causes serious eye irritation
---
---
H332 Harmful if inhaled
---
---
H335 May cause respiratory irritation
---
---
H351 Suspected of causing cancer
---
---
H361 Suspected of damaging fertility or the unborn child
---
---
H372 Causes damage to organs through prolonged or repeated exposure
---
---
H400 Very toxic to aquatic life
---
---
H402 Harmful to aquatic life
---
---
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.