249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/08/2022
08/08/2022 EN (English) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : 249A W/UV Photoinitiator
CAS-No. : mixture
Product code : 30P-063
Formula : N/A
Other means of identification : Unsaturated Polyester Resin Product
1.2. Recommended use and restrictions on use
Use of the substance/mixture : Resin
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids, Category 3 H226 Flammable liquid and vapour.
Acute toxicity (inhal.), Category 4 H332 Harmful if inhaled.
Skin corrosion/irritation, Category 2 H315 Causes skin irritation.
Serious eye damage/eye irritation, Category 2 H319 Causes serious eye irritation.
Carcinogenicity, Category 2 H351 Suspected of causing cancer.
Reproductive toxicity, Category 2 H361 Suspected of damaging fertility or the unborn child.
Specific target organ toxicity Single exposure, Category 3, Respiratory tract
irritation
H335 May cause respiratory irritation.
Specific target organ toxicity Repeated exposure, Category 1 H372 Causes damage to organs through prolonged or repeated
exposure.
Hazardous to the aquatic environment Acute Hazard, Category 2 H401 Toxic to aquatic life
Full text of H-statements: see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Hazard statements (GHS US) : H226 – Flammable liquid and vapour.
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
H332 – Harmful if inhaled.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 2/10
Precautionary statements (GHS US) : P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment.
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust/fume/gas/mist/vapours/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash EXPOSED AREA. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center or doctor if you feel unwell.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS..
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS-US classification
styrene, inhibited
(CAS-No.) 100-42-5 <= 36.5 Flam. Liq. 3, H226 Acute Tox. 4 (Inhalation), H332 Acute Tox. 4 (Inhalation:vapour), H332 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Carc. 2, H351 Repr. 2, H361 STOT SE 3, H335 STOT RE 1, H372 Aquatic Acute 2, H401 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). IF exposed or concerned: Get medical advice/attention. Call a poison center or a doctor if you feel unwell. First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Call a poison center or a doctor if you feel unwell. 249A W/UV Photoinitiator Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 08/08/2022 EN (English) 3/10 First-aid measures after skin contact : Rinse skin with water/shower. Take off immediately all contaminated clothing. Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs: Get medical advice/attention. First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get medical advice/attention. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell. 4.2. Most important symptoms and effects (acute and delayed) Potential adverse human health effects and symptoms : Harmful if inhaled. Based on available data, the classification criteria are not met. Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin contact and inhalation.). Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if inhaled. May cause respiratory irritation. Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction. Symptoms/effects after eye contact : Causes serious eye irritation. 4.3. Immediate medical attention and special treatment, if necessary Treat symptomatically. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Specific hazards arising from the chemical Fire hazard : Highly flammable liquid and vapour. Flammable liquid and vapour. Explosion hazard : May form flammable/explosive vapour-air mixture. Reactivity in case of fire : No reactivity hazard other than the effects described in sub-sections below. 5.3. Special protective equipment and precautions for fire-fighters Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment. Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking. 6.1.1. For non-emergency personnel Protective equipment : Gloves. Protective goggles. Protective clothing. Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. 6.1.2. For emergency responders Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with proper protection. For further information refer to section 8: "Exposure controls/personal protection". Emergency procedures : Ventilate area. 6.2. Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up For containment : Dam up the liquid spill. Contain released product, pump into suitable containers. 249A W/UV Photoinitiator Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 08/08/2022 EN (English) 4/10 Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. Notify authorities if product enters sewers or public waters. Other information : Dispose of materials or solid residues at an authorized site. 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed : Handle empty containers with care because residual vapours are flammable. Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Use only non- sparking tools. Use only outdoors or in a well-ventilated area. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Eliminate all ignition sources if safe to do so. Take precautionary measures against static discharge. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. equipment. Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store locked up. Store in a well-ventilated place. Keep cool. Incompatible products : Strong bases. Strong acids. Incompatible materials : Sources of ignition. Direct sunlight. Heat sources. SECTION 8: Exposure controls/personal protection 8.1. Control parameters styrene, inhibited (100-42-5) ACGIH ACGIH TWA (ppm) 20 ppm ACGIH ACGIH STEL (ppm) 40 ppm 8.2. Appropriate engineering controls Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good ventilation of the work station. Environmental exposure controls : Avoid release to the environment. 8.3. Individual protection measures/Personal protective equipment Personal protective equipment: Avoid all unnecessary exposure. Hand protection: Wear protective gloves. Eye protection: Chemical goggles or safety glasses. Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: 249A W/UV Photoinitiator Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 08/08/2022 EN (English) 5/10 Wear appropriate mask. [In case of inadequate ventilation] wear respiratory protection. Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : Various Odour : characteristic Odour threshold : No data available pH : No data available Melting point : Not applicable Freezing point : No data available Boiling point : >= 275 ( 0) F
Flash point : >= 86 F
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapour. Flammable liquid and vapour.
Vapour pressure : No data available
Relative vapour density at 20 C : No data available
Relative density : 1 – 1.2
Density : 1 – 1.2 kg/l
Solubility : No data available
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapour.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapour. May form
flammable/explosive vapour-air mixture. Flammable liquid and vapour.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 6/10
Acute toxicity (oral) : Not classified
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Harmful if inhaled.
ATE US (gases) 4500 ppmv/4h
ATE US (vapours) 11 mg/l/4h
ATE US (dust,mist) 1.5 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat > 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 Inhalation – Rat 11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))
LC50 Inhalation – Rat [ppm] 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000 mg/kg bodyweight
ATE US (dermal) 5010 mg/kg bodyweight
ATE US (gases) 2770 ppmv/4h
ATE US (vapours) 11 mg/l/4h
ATE US (dust,mist) 1.5 mg/l/4h
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitisation : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status Reasonably anticipated to be Human Carcinogen
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
STOT-single exposure : May cause respiratory irritation.
styrene, inhibited (100-42-5)
STOT-single exposure May cause respiratory irritation.
STOT-repeated exposure : Causes damage to organs through prolonged or repeated exposure.
styrene, inhibited (100-42-5)
STOT-repeated exposure Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
Potential adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
styrene, inhibited (100-42-5)
LC50 fish 1 10 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 1 4.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 7/10
styrene, inhibited (100-42-5)
ErC50 (algae) 4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
12.2. Persistence and degradability
249A W/UV Photoinitiator (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42 (Literature study)
12.3. Bioaccumulative potential
249A W/UV Photoinitiator (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus, Literature study)
Log Pow 2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (20 C)
Log Koc 2.55 (log Koc, Estimated value)
Ecology - soil Low potential for adsorption in soil.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste) : Disposal must be done according to official regulations.
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Sewage disposal recommendations : Do not discharge into drains.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site..
Additional information : Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transport document description : UN1866 Resin solution, 3, III
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : Resin solution
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 8/10
Hazard labels (DOT) : 3 - Flammable liquid
DOT Packaging Non Bulk (49 CFR 173.xxx) : 173
DOT Packaging Bulk (49 CFR 173.xxx) : 242
DOT Special Provisions (49 CFR 172.102) : B1 - If the material has a flash point at or above 38 C (100 F) and below 93 C (200 F), then the
bulk packaging requirements of 173.241 of this subchapter are applicable. If the material has a
flash point of less than 38 C (100 F), then the bulk packaging requirements of 173.242 of this
subchapter are applicable.
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB3 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids
with a vapor pressure less than or equal to 110 kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55
C (1.3 bar at 131 F) are authorized, except for UN2672 (also see Special Provision IP8 in Table
2 for UN2672).
T2 - 1.5 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
DOT Packaging Exceptions (49 CFR 173.xxx) : 150
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
: 60 L
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
: 220 L
DOT Vessel Stowage Location : A - The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel.
Emergency Response Guide (ERG) Number : 127
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 Resin solution, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : Resin solution
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 9/10
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
Yes No No No 27 g/day
Component State or local regulations
styrene, inhibited(100-42-5) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date : 08/08/2022
Other information : None.
Full text of H-statements:
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.
H361 Suspected of damaging fertility or the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.
H401 Toxic to aquatic life
249A W/UV Photoinitiator
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/08/2022 EN (English) 10/10
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.