1726 Floradale Ave., So. El Monte, CA 91733 | 626.443.8983 | sales@FinishKare.com | FinishKare.com
Product Data Sheet
1000P
Hi Low Paste Wax
Premium Mold Release Wax
Description
Finish Kare’s 1000P Hi Low Paste Wax is one of
our very popular product . It is part of the 1000 Mold Release
Wax Series, each formulated with a unique blend of synthetic
waxes and solvents to get specifically desired results.
1000P does exceptionally well in high exothermic conditions
and provides easy multiple releases.
Features & Benefits
High Temp Tolerance
Withstands high temperature exothermic reactions
of resins and does multiple releases easily.
Good for up to 275 F or 135 C.
Unique Wax Makeup
Contains carnauba wax, synthetic waxes and high
temperature resistant resins for effective multiple
releases of composite parts.
High Gloss Finish
Buffing out the final coat will result in a high gloss
finish
The hard, shiny film protects the molds from
intensive wear and heat and creates smoother,
shinier parts
Clean & Seal
Prior to any mold release wax application, we highly
recommend all molds be cleaned and sealed using our #69
Mold Cleaner and Stripper or #135 80 for a deeper clean and
our #86 Seal Kote to seal up any porosity.
Application Process
Step 1: Apply # 1000P, Hi Low Mold Release Wax in Five (5)
separate applications. Make sure that each coat is dry prior to
wiping. Please criss cross each application for assuring the
complete coverage. Apply wax in a circular motion to work the
wax in.
Step 2: Allow 30 minutes to set after the final wipe. Then re
wipe, pour the first part and release it.
Step 3: After releasing the part gently wipe the mold, then
apply one more coat of wax and release one more part.
AT THIS POINT, MOLD IS CURED TO THE POINT THAT
MULTIPLE RELEASES ARE POSSIBLE.
***Additional Release Tricks***
When a part gets a little hard to pull, apply one coat of
#1000L, Hi Low Liquid Wax, let it dry and wipe lightly. Run
more parts and apply # 1000L as needed. Use of # 1000L helps
in preventing wax buildup and thus helps in multiple releases.
Safety Data Sheet
Safety Date Sheets are available for all Finish Kare products
and should be consulted prior to use
Storage and Shelf Life
Store tightly closed container in a dry, cool place that is well
ventilated and below 46 C /104 F. Do not handle or store
near open flame, heat or other sources of ignition. Shelf life is
1 years from date of shipment.
IMITATIONS OF LIABILITY
To the best of our knowledge, the data presented here is true and accurate, but is
subject to change without prior notice. User is kindly requested to contact Finish Kare
Products to verify the correctness before specifying or ordering. Since we don t know
how the product will be used we cannot assume any responsibility for its use,
performance, or any injuries resulting from its use. Liability, if any, is limited to
replacement of defective product. No warranty or guarantee of any kind is expressed or
implied by Finish Kare Products, Inc.