Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet