Page 1/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
49.1.7
1 Identification
Product identifier
Trade name: ES221 Black Resin
Article number:I221288
Application of the substance / the mixtureResin
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
GHS08 Health hazard
Repr. 1B H360 May damage fertility or the unborn child.
GHS09 Environment
Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
Aquatic Acute 2 H401 Toxic to aquatic life.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 1)
49.1.7
Hazard pictograms
GHS07GHS08GHS09
Signal wordDanger
Hazard-determining components of labeling:
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane
N-methyl-2-pyrrolidone
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
May cause an allergic skin reaction.
May damage fertility or the unborn child.
Toxic to aquatic life.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF exposed or concerned: Get medical advice/attention.
Specific treatment (see on this label).
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
1
1
0
Health = 1
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
1
1
0
Health = 1
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US
Page 3/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 2)
49.1.7
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 28064-14-4 Epoxy phenol novolac resin
Reaction product of Phenol-Formaldehyde Novolac with Epichlorohydrin
10-20%
CAS: 17557-23-2
EINECS: 241-536-7
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane 5-<10%
CAS: 25068-38-6
NLP: 500-033-5
Reaction Product of Bisphenol A and Epichlorohydrin 1-<2.5%
CAS: 67762-90-7 Silicones and siloxanes, dimethyl-, reaction products with silica 1-5%
CAS: 872-50-4
EINECS: 212-828-1
N-methyl-2-pyrrolidone 0.1-1%
4 First-aid measures
Description of first aid measures
General information:Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:Rinse opened eye for several minutes under running water.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
(Contd. on page 4)
US
Page 4/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 3)
49.1.7
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
28064-14-4 Epoxy phenol novolac resin
Reaction product of Phenol-Formaldehyde Novolac with Epichlorohydrin
30 mg/m
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 90 mg/m
67762-90-7 Silicones and siloxanes, dimethyl-, reaction products with silica 120 mg/m
872-50-4 N-methyl-2-pyrrolidone 30 ppm
PAC-2:
28064-14-4 Epoxy phenol novolac resin
Reaction product of Phenol-Formaldehyde Novolac with Epichlorohydrin
330 mg/m
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 990 mg/m
67762-90-7 Silicones and siloxanes, dimethyl-, reaction products with silica 1,300 mg/m
872-50-4 N-methyl-2-pyrrolidone 32 ppm
PAC-3:
28064-14-4 Epoxy phenol novolac resin
Reaction product of Phenol-Formaldehyde Novolac with Epichlorohydrin
2,000 mg/m
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 5,900 mg/m
67762-90-7 Silicones and siloxanes, dimethyl-, reaction products with silica 7,900 mg/m
872-50-4 N-methyl-2-pyrrolidone 190 ppm
US
(Contd. on page 5)
Page 5/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 4)
49.1.7
7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituent is the only constituent of the product which has a PEL, TLV or other recommended
exposure limit.
At this time, the other constituents have no known exposure limits.
872-50-4 N-methyl-2-pyrrolidone
TLV BEI
WEEL Long-term value: 10 ppm
Skin
Ingredients with biological limit values:
872-50-4 N-methyl-2-pyrrolidone
BEI 100 mg/L
Medium: urine
Time: end of shift
Parameter: 5-Hydroxy-N-methyl-2-pyrrolidone
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the skin.
(Contd. on page 6)
US
Page 6/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 5)
49.1.7
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:Goggles recommended during refilling.
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Thixotropic Paste
Color: Black
Odor: Characteristic
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:201 C (393.8 F)
Flash point: 110 C (230 F)
Flammability (solid, gaseous):Not applicable.
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
(Contd. on page 7)
US
Page 7/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 6)
49.1.7
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.5 g/cm (12.52 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.2 %
VOC content: 0.22 %
3.3 g/l / 0.03 lb/gal
Solids content: 39.2 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:No irritating effect.
Sensitization:Sensitization possible through skin contact.
(Contd. on page 8)
US
Page 8/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 7)
49.1.7
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
1333-86-4 Carbon black 2B
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Toxic for fish
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
(Contd. on page 9)
US
Page 9/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 8)
49.1.7
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT not regulated
IMDG, IATA UN3082
UN proper shipping name
DOT not regulated
IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy phenol novolac resin, Epoxy Resin), MARINE
POLLUTANT
IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy phenol novolac resin, Epoxy Resin)
Transport hazard class(es)
DOT
Class not regulated
IMDG, IATA
Class 9 Miscellaneous dangerous substances and articles
Label 9
Packing group
DOT not regulated
IMDG, IATA III
Environmental hazards: Product contains environmentally hazardous substances: Epoxy
phenol novolac resin
Marine pollutant: Yes
Symbol (fish and tree)
Special marking (IATA): Symbol (fish and tree)
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Danger code (Kemler): 90
EMS Number: F-A,S-F
Stowage Category A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
(Contd. on page 10)
US
Page 10/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 9)
49.1.7
Transport/Additional information:
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN "Model Regulation": UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
LIQUID, N.O.S. (EPOXY PHENOL NOVOLAC RESIN, EPOXY
RESIN), 9, III
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
872-50-4 N-methyl-2-pyrrolidone
TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
None of the ingredients is listed.
Proposition 65
Chemicals known to cause cancer:
1317-65-3 Calcium Carbonate
1333-86-4 Carbon black
14808-60-7 Quartz (SiO2)
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
(Contd. on page 11)
US
Page 11/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 10)
49.1.7
Chemicals known to cause developmental toxicity:
872-50-4 N-methyl-2-pyrrolidone
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
1333-86-4 Carbon black
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07GHS08GHS09
Signal wordDanger
Hazard-determining components of labeling:
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane
N-methyl-2-pyrrolidone
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
May cause an allergic skin reaction.
May damage fertility or the unborn child.
Toxic to aquatic life.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF exposed or concerned: Get medical advice/attention.
Specific treatment (see on this label).
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
US
(Contd. on page 12)
Page 12/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/16/2019 Reviewed on 11/16/2019
Trade name: ES221 Black Resin
(Contd. of page 11)
49.1.7
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision11/16/2019 / 1
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Skin Irrit. 2: Skin corrosion/irritation Category 2
Skin Sens. 1: Skin sensitisation Category 1
Repr. 1B: Reproductive toxicity Category 1B
Aquatic Acute 2: Hazardous to the aquatic environment - acute aquatic hazard Category 2
Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard Category 2
* Data compared to the previous version altered.
US
Page 1/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
50. 0
1 Identification
Product identifier
Trade name: ES221 Hardener
Article number:I500889-2
Application of the substance / the mixtureEpoxy hardener
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier's Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
advancedresins.ehs@us.sika.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS06 Skull and crossbones
Acute Tox. 2 H330 Fatal if inhaled.
GHS08 Health hazard
Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Repr. 1B H360F May damage fertility.
GHS05 Corrosion
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
GHS07
(Contd. on page 2)
US
Page 2/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 1)
50. 0
Acute Tox. 4 H302 Harmful if swallowed.
Skin Sens. 1 H317 May cause an allergic skin reaction.
STOT SE 3 H335 May cause respiratory irritation.
Flam. Liq. 4 H227 Combustible liquid.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS05GHS06GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
2,2'-iminodiethylamine
Aromatic amine epoxy adduct - trade secret
bisphenol A
1-methylimidazole
1,6-Hexanediamine, 2,2,4 (or 2,4,4)-trimethyl-
Hazard statements
Combustible liquid.
Harmful if swallowed.
Fatal if inhaled.
Causes severe skin burns and eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
May damage fertility.
May cause respiratory irritation.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Keep away from flames and hot surfaces. No smoking.
Do not breathe dusts or mists.
Wear protective gloves/protective clothing/eye protection/face protection.
[In case of inadequate ventilation] wear respiratory protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment is urgent (see on this label).
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
(Contd. on page 3)
US
Page 3/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 2)
50. 0
Classification system:
NFPA ratings (scale 0 - 4)
3
2
0
Health = 3
Fire = 2
Reactivity = 0
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
*3
2
0
Health = *3
Fire = 2
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
Aromatic amine epoxy adduct - trade secret 25- 50%
CAS: 111-40-0
EINECS: 203-865-4
2,2'-iminodiethylamine 20-50%
CAS: 80-05-7
EINECS: 201-245-8
bisphenol A 20%
CAS: 616-47-7
EINECS: 210-484-7
1-methylimidazole 5%
CAS: 25513-64-8
EINECS: 247-134-8
1,6-Hexanediamine, 2,2,4 (or 2,4,4)-trimethyl- 1-<2.5%
4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
Remove breathing apparatus only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
(Contd. on page 4)
US
Page 4/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 3)
50. 0
After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing:
Immediately call a doctor.
Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
(Contd. on page 5)
US
Page 5/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 4)
50. 0
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
111-40-0 2,2'-iminodiethylamine 3 ppm
80-05-7 bisphenol A 15 mg/m
616-47-7 1-methylimidazole 2.3 mg/m
PAC-2:
111-40-0 2,2'-iminodiethylamine 8.5 ppm
80-05-7 bisphenol A 110 mg/m
616-47-7 1-methylimidazole 25 mg/m
PAC-3:
111-40-0 2,2'-iminodiethylamine 51 ppm
80-05-7 bisphenol A 650 mg/m
616-47-7 1-methylimidazole 150 mg/m
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituent is the only constituent of the product which has a PEL, TLV or other recommended
exposure limit.
At this time, the other constituents have no known exposure limits.
(Contd. on page 6)
US
Page 6/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 5)
50. 0
111-40-0 2,2'-iminodiethylamine
REL Long-term value: 4 mg/m , 1 ppm
Skin
TLV Long-term value: 4.2 mg/m , 1 ppm
Skin
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
US
(Contd. on page 7)
Page 7/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 6)
50. 0
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Clear
Odor: Amine-like
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:198 C (388.4 F)
Flash point: 92 C (197.6 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 325 C (617 F)
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Not determined.
Explosion limits:
Lower: 1 Vol %
Upper: 10 Vol %
Vapor pressure at 20 C (68 F):0.5 hPa (0.4 mm Hg)
Density at 20 C (68 F): 1.05 g/cm (8.76 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
Solids content: 20.0 %
(Contd. on page 8)
US
Page 8/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 7)
50. 0
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
111-40-0 2,2'-iminodiethylamine
Oral LD50 1,553 mg/kg (rat)
Dermal LD50 1,045 mg/kg (rabbit)
80-05-7 bisphenol A
Oral LD50 3,250 mg/kg (rat)
Dermal LD50 3,000 mg/kg (rabbit)
616-47-7 1-methylimidazole
Oral LD50 1,400 mg/kg (mouse)
Primary irritant effect:
on the skin:Caustic effect on skin and mucous membranes.
on the eye:
Strong caustic effect.
Strong irritant with the danger of severe eye injury.
Sensitization:
Sensitization possible through inhalation.
Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Toxic
Harmful
Corrosive
Irritant
Very toxic
(Contd. on page 9)
US
Page 9/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 8)
50. 0
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus
and stomach.
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
* 12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Danger to drinking water if even small quantities leak into the ground.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
US
(Contd. on page 10)
Page 10/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 9)
50. 0
* 14 Transport information
UN-Number
DOT, IMDG, IATA UN2922
UN proper shipping name
DOT Corrosive liquids, toxic, n.o.s. (Diethylenetriamine, 1-
methylimidazole)
IMDG CORROSIVE LIQUID, TOXIC, N.O.S. (DIETHYLENETRIAMINE,
1-methylimidazole), MARINE POLLUTANT
IATA CORROSIVE LIQUID, TOXIC, N.O.S. (DIETHYLENETRIAMINE,
1-methylimidazole)
Transport hazard class(es)
DOT
Class 8 Corrosive substances
Label 8, 6.1
IMDG
Class 8 Corrosive substances
Label 8/6.1
IATA
Class 8 Corrosive substances
Label 8 (6.1)
Packing group
DOT, IMDG, IATA II
Environmental hazards: Product contains environmentally hazardous substances: 1,3-
Benzenedimethanamine, polymer with 2,2'-[(1-methylethylidene)
bis(4,1-phenyleneoxymethylene)
(Contd. on page 11)
US
Page 11/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 10)
50. 0
Marine pollutant: No
Yes (DOT)
Symbol (fish and tree)
Special precautions for user Warning: Corrosive substances
Danger code (Kemler): 86
EMS Number: F-A,S-B
Segregation groups Alkalis
Stowage Category B
Stowage Code SW2 Clear of living quarters.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: 1 L
On cargo aircraft only: 30 L
Remarks: Special marking with the symbol (fish and tree).
IMDG
Limited quantities (LQ) 1L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 500 ml
UN "Model Regulation": UN 2922 CORROSIVE LIQUID, TOXIC, N.O.S.
(DIETHYLENETRIAMINE, 1-METHYLIMIDAZOLE), 8 (6.1), II,
ENVIRONMENTALLY HAZARDOUS
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
80-05-7 bisphenol A
TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
(Contd. on page 12)
US
Page 12/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 11)
50. 0
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
None of the ingredients is listed.
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
80-05-7 bisphenol A
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS05GHS06GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
2,2'-iminodiethylamine
Aromatic amine epoxy adduct - trade secret
bisphenol A
1-methylimidazole
1,6-Hexanediamine, 2,2,4 (or 2,4,4)-trimethyl-
Hazard statements
Combustible liquid.
(Contd. on page 13)
US
Page 13/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 12)
50. 0
Harmful if swallowed.
Fatal if inhaled.
Causes severe skin burns and eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
May damage fertility.
May cause respiratory irritation.
Precautionary statements
Keep away from flames and hot surfaces. No smoking.
Do not breathe dusts or mists.
Wear protective gloves/protective clothing/eye protection/face protection.
[In case of inadequate ventilation] wear respiratory protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment is urgent (see on this label).
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision02/05/2020 / 9
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flam. Liq. 4: Flammable liquids Category 4
Acute Tox. 4: Acute toxicity Category 4
Acute Tox. 2: Acute toxicity Category 2
Skin Corr. 1B: Skin corrosion/irritation Category 1B
(Contd. on page 14)
US
Page 14/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 02/05/2020 Reviewed on 02/05/2020
Trade name: ES221 Hardener
(Contd. of page 13)
50. 0
Eye Dam. 1: Serious eye damage/eye irritation Category 1
Resp. Sens. 1: Respiratory sensitisation Category 1
Skin Sens. 1: Skin sensitisation Category 1
Repr. 1B: Reproductive toxicity Category 1B
STOT SE 3: Specific target organ toxicity (single exposure) Category 3
* Data compared to the previous version altered.
US