Epoxy Marine Laminating Resin
Safety Data Sheet 80LM-2A
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 05/04/2023
05/04/2023 EN (English US) SDS ID: 80LM-2A Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : Epoxy Marine Laminating Resin
CAS-No. : Mixture
Product code : 80LM-2A
Formula : N/A
1.2. Recommended use and restrictions on use
Use of the substance/mixture : Epoxy laminating Resin
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2 H315 Causes skin irritation
Serious eye damage/eye irritation Category 2A H319 Causes serious eye irritation
Serious eye damage/eye irritation Category 2B H320 Causes eye irritation
Skin sensitization, Category 1 H317 May cause an allergic skin reaction
Specific target organ toxicity Single exposure, Category 3, Respiratory tract
irritation
H335 May cause respiratory irritation
Specific target organ toxicity (repeated exposure) Category 1 H372 Causes damage to organs through prolonged or repeated
exposure
Hazardous to the aquatic environment – Acute Hazard Category 2 H401 Toxic to aquatic life
Hazardous to the aquatic environment – Chronic Hazard Category 2 H411 Toxic to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Hazard statements (GHS US) : H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H320 – Causes eye irritation
H335 – May cause respiratory irritation
H372 – Causes damage to organs through prolonged or repeated exposure
H401 – Toxic to aquatic life
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS US) : P260 – Do not breathe dust/fume/gas/mist/vapors/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 2/9
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 – If on skin: Wash with plenty of water.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P312 – Call a poison center or doctor if you feel unwell.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P391 – Collect spillage.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification
epoxy resins, liquids, MM 700
(CAS-No.) 25068-38-6 <= 75 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Acute 2, H401
Aquatic Chronic 2, H411
trimethylolpropane triacrylate,stabilized
(CAS-No.) 15625-89-5 <= 10 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane
(CAS-No.) 17557-23-2 <= 8 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute 3, H402
Epoxy Phenol Novolac Resin
(CAS-No.) 0028064-14-4 <= 5 Skin Irrit. 2, H315
Skin Sens. 1, H317
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible).
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or
doctor/physician if you feel unwell. Allow affected person to breathe fresh air. Allow the victim to
rest.
First-aid measures after skin contact : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction
on this label). If skin irritation or rash occurs: Wash skin with plenty of water.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 3/9
4.2. Most important symptoms and effects (acute and delayed)
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met.
Symptoms/effects : Causes damage to organs through prolonged or repeated exposure.
Symptoms/effects after inhalation : May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes eye irritation. Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Until victim can be cared for by specialized staff:
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or
explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapor. Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area. Do not breathe dust/fume/gas/mist/vapors/spray.
Hygiene measures : Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and
when leaving work. Wash hands, forearms and face thoroughly after handling. Contaminated
work clothing should not be allowed out of the workplace. Wash contaminated clothing before
reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling
the product.
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 4/9
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Keep container tightly closed. Keep container closed when not in use. Store in a well-ventilated
place.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.
Storage temperature : 2 – 40 C
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
trimethylolpropane triacrylate,stabilized (15625-89-5)
Not applicable
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Not applicable
epoxy resins, liquids, MM 700 (25068-38-6)
Not applicable
Epoxy Phenol Novolac Resin (0028064-14-4)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure good ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Materials for protective clothing:
GIVE GOOD RESISTANCE: rubber
Hand protection:
Wear protective gloves.
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Appearance : Liquid.
Color : Colorless colorless to slightly yellow
Odor : slight characteristic
Odor threshold : No data available
pH : No data available
Melting point : N/A
Freezing point : No data available
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 5/9
Boiling point : > 392 F
Flash point : > 212 F
Relative evaporation rate (butyl acetate=1) : No data available
Relative evaporation rate (ether=1) : < 1 slower than ether
Flammability (solid, gas) : Non flammable.
Vapor pressure : < 2 mm Hg
Relative vapor density at 20 C : No data available
Relative density : 1.13
Density : 1.13 kg/l
Solubility : Insoluble in water.
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Combustible liquid. Not established.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Open flame. Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) : Not classified (Lack of data)
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Not classified
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
LD50 oral rat 4500 mg/kg (Rat, Literature study, Oral)
LD50 dermal rat > 2100 mg/kg body weight (Rat, Literature study, Dermal)
ATE US (oral) 4500 mg/kg body weight
epoxy resins, liquids, MM 700 (25068-38-6)
LD50 oral rat > 2000 mg/kg (OECD 420: Acute Oral toxicity Acute Toxic Class Method, Rat, Female,
Experimental value, Oral, 14 day(s))
LD50 dermal rat > 2000 mg/kg (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female, Experimental
value, Dermal)
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation. Causes eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 6/9
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
STOT-single exposure : May cause respiratory irritation.
STOT-repeated exposure : Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
Likely routes of exposure : Inhalation.
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met.
Symptoms/effects : Causes damage to organs through prolonged or repeated exposure.
Symptoms/effects after inhalation : May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes eye irritation. Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
Ecology – water : Toxic to aquatic life with long lasting effects.
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
LC50 fish 1 > 100 mg/l (96 h, Pisces, QSAR)
EC50 Daphnia 1 39 – 57 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value)
epoxy resins, liquids, MM 700 (25068-38-6)
LC50 fish 1 2.3 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Oncorhynchus mykiss, Semi-static
system, Fresh water, Experimental value, Nominal concentration)
EC50 Daphnia 1 1.1 – 2.8 mg/l (Equivalent or similar to OECD 202, 48 h, Daphnia magna, Static system, Fresh
water, Experimental value, Locomotor effect)
ErC50 (algae) > 11 mg/l (EPA 660/3 – 75/009, 72 h, Scenedesmus sp., Static system, Fresh water,
Experimental value)
12.2. Persistence and degradability
Epoxy Marine Laminating Resin (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.
trimethylolpropane triacrylate,stabilized (15625-89-5)
Persistence and degradability Biodegradability in water: no data available.
ThOD
1.835 g O /g substance
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Persistence and degradability Readily biodegradable in water.
epoxy resins, liquids, MM 700 (25068-38-6)
Persistence and degradability Not readily biodegradable in water.
Epoxy Phenol Novolac Resin (0028064-14-4)
Persistence and degradability Not established.
12.3. Bioaccumulative potential
Epoxy Marine Laminating Resin (Mixture)
Bioaccumulative potential Not established.
trimethylolpropane triacrylate,stabilized (15625-89-5)
Bioaccumulative potential No bioaccumulation data available.
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Log Pow 0.47 (QSAR, KOWWIN, 20 C)
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 7/9
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
epoxy resins, liquids, MM 700 (25068-38-6)
BCF other aquatic organisms 1 31 (Estimated value, Fresh weight)
Log Pow 2.64 - 3.78 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC
method, 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
Epoxy Phenol Novolac Resin (0028064-14-4)
Bioaccumulative potential Not established.
12.4. Mobility in soil
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Log Koc 1.22 (log Koc, QSAR)
Ecology - soil Highly mobile in soil.
epoxy resins, liquids, MM 700 (25068-38-6)
Surface tension 58.7 - 58.9 mN/m (20 C, EU Method A.5: Surface tension)
Log Koc 2.65 (log Koc, SRC PCKOCWIN v2.0, QSAR)
Ecology - soil Low potential for adsorption in soil.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste) : Disposal must be done according to official regulations.
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Sewage disposal recommendations : Do not discharge into drains.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation.
Additional information : Clean up even minor leaks or spills if possible without unnecessary risk.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Not regulated
Transportation of Dangerous Goods
Not regulated
Transport by sea
Transport document description (IMDG) : UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N. O.S. (Epoxy Resin ),
9, III, MARINE POLLUTANT
UN-No. (IMDG) : 3082
Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O. S.
Class (IMDG) : 9 - Miscellaneous dangerous substances and articles
Packing group (IMDG) : III - substances presenting low danger
Limited quantities (IMDG) : 5 L
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 8/9
Marine pollutant : Yes
Air transport
Transport document description (IATA) : UN 3082 Environmentally hazardous substance, liquid, n.o.s. (Epoxy Resin ), 9, III
UN-No. (IATA) : 3082
Proper Shipping Name (IATA) : Environmentally hazardous substance, liquid, n.o.s.
Class (IATA) : 9 - Miscellaneous Dangerous Substances and Articles
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
trimethylolpropane triacrylate,stabilized (15625-89-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
EPA TSCA Regulatory Flag T - T - indicates a substance that is the subject of a final TSCA section 4 test rule.
epoxy resins, liquids, MM 700 (25068-38-6)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
EPA TSCA Regulatory Flag XU - XU - indicates a substance exempt from reporting under the Chemical Data Reporting
Rule, (40 CFR 711).
Epoxy Phenol Novolac Resin (0028064-14-4)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
trimethylolpropane triacrylate,stabilized (15625-89-5)
Listed on the Canadian DSL (Domestic Substances List)
1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Listed on the Canadian DSL (Domestic Substances List)
epoxy resins, liquids, MM 700 (25068-38-6)
Listed on the Canadian DSL (Domestic Substances List)
Epoxy Phenol Novolac Resin (0028064-14-4)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
EU-Regulations
No additional information available
National regulations
No additional information available
15.3. US State regulations
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Epoxy Marine Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/04/2023 EN (English US) SDS ID: 80LM-2A 9/9
Revision date : 05/04/2023
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information : None.
Full text of H-phrases:
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H320 Causes eye irritation
H335 May cause respiratory irritation
H372 Causes damage to organs through prolonged or repeated exposure
H401 Toxic to aquatic life
H402 Harmful to aquatic life
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 1 - Materials that, under emergency conditions, can cause
significant irritation.
NFPA fire hazard : 1 - Materials that must be preheated before ignition can
occur.
NFPA reactivity : 1 - Materials that in themselves are normally stable but can
become unstable at elevated temperatures and pressures.
Hazard Rating
Health : 1 Slight Hazard - Irritation or minor reversible injury possible
Flammability : 1 Slight Hazard - Materials that must be preheated before ignition will occur. Includes liquids,
solids and semi solids having a flash point above 200 F. (Class IIIB)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.