Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use
and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or
merchantability or fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special , incidental or consequential damages
Last updated June 12, 2018 ISO 9001:2015 Registered Company
1
80LS- 32 SYSTEM
EPOXY LAMINATING RESIN
80LS-32 is a100% solids epoxy laminating system. The system yields an increased cross link
density making it especially suitable for lightweight, high performance composites using a
variety of reinforcements.
USES
To make lightweight composites Hand lay up application
Coating Repair applications.
PERFORMANCE BENEFITS
Superior fatigue and toughness
properties
Good adhesion to fabrics, core
materials
Good moisture exclusion Excellent wet out and air release
Good clarity
CURING 80LS-32 SYSTEM
80LS-32 system mixes maintain good working properties until gelation takes place.
Allow the composite to cure for 3 hours at 130 F for best results.
TYPICAL LIQUID SYSTEM PROPERTIES AT 25 C/77 F FOR AO 80LS-32 SYSTEM
Property 80LS-32
Mix Ratio (parts by weight)
100 Resin/ Hardener 22
Density part A, lbs/gal 9.5
Density part B, lbs/gal 8.2
Density (mixed), lbs/gal 9.17
Viscosity (mixed) 900-1200 cps
Specific Gravity, (mixed) 1.098
Color, mixed Amber
Pot Life @ 77 F 33-38 minutes
Cure Time, Hrs at 130 F 3 Hrs
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use
and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or
merchantability or fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special , incidental or consequential damages
Last updated June 12, 2018 ISO 9001:2015 Registered Company
2
CURED SYSTEM PROPERTIES FOR 80LS-32 SYSTEM
Property 80LS-32
Hardness, Shore D, ASTM D-2240: 1 Day Cure
79
Glass Transition Temp >170 F
PACKAGING WEIGHTS IN LBS
Material Gallon Pail Drum
80LS-32A Resin (lbs) 7.3 36.4 364
80LS-32B
Hardener (lbs)
1.6 8.0 80 (2Pails)