TC-1570 A/B Page 1 of 2 Date: 02/13/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
TC-1570 A/B
WHITE EPOXY SURFACE COAT
TC-1570 A/B is a general-purpose white epoxy surface coat that can be used in conjunction with epoxy or polyurethane resin
systems. TC-1570 A/B is noted for its ease of application and its ability to hang on vertical surfaces without sag or runoff.
PHYSICAL PROPERTIES TEST METHOD RESULTS
Hardness, Shore D ASTM D2240 90 2
Density (g/cc) ASTM D792 1.92
Cubic Inches per Pound N/A 13.7
Color/Appearance Visual White Opaque
Flexural Strength (psi) ASTM D790 8,100
Flexural Modulus (psi) ASTM D790 9.5 x 10
5
Heat Deflection Temperature @ 66 psi ASTM D648 220 F (104.4 C)
Heat Deflection Temperature @ 264 psi ASTM D648 217 F (102.8 C)
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 8
Specific Gravity @ 77 F (25 C) 2.1 1.08
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield Brushable
Work Time, 100g mass @ 77 F (25 C) 15 20 minutes
Cure Schedule 8 12 hours
Properties above are typical and not for specifications.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of
shipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Square Inches
per Kit
(Coverage @ 1/16 thick)
Quart Kits 3 lbs. 4 oz. 712
Gallon Kits 10 lbs. 13 oz. 2,370
5-Gallon Kits 45 lbs. 3.6 lbs. 10,653
EPOXY RESIN SYSTEMS
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
TC-1570 A/B Page 2 of 2 Date: 02/13/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-892
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or
prolonged contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved
safety glasses or goggles when handling this product.
IF CONTACT OCCURS :
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek
qualified medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting
only as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 4,4 -Isopropylidenediphenol, which are known to
the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
TC-1570 Part A SDS TC-1570 Part B SDS