AXSON TECHNOLOGIES US
+1 248 588 2270
axsonmh@axson.com
axson-na.com
CHINA
+86 21 58 68 30 37
marketing.china@axson.com
GERMANY
+49 6 07 44 07 11-0
verkauf@axson.com
INDIA
+91 20 25 56 07 10-11
info.india@axson.com
ITALY
+39 02 96 70 23 36
axson@axson.it
JAPAN
+81 5 64 26 25 91
sales.japan@axson.com
FRANCE
Global Headquarters
+33 1 34 40 34 60
axson@axson.com
axson-technologies.com
MEXICO
+52 55 52 64 49 22
marketing@axson.com.mx
MIDDLE EAST
+971 7 2432227
axsonmideast@axson.com
SLOVAKIA
+42 1 76 42 25 26
axson.sk@axson.com
SPAIN
+34 9 32 25 16 20
spain@axson.com
U.K.
+44 16 38 66 00 62
sales.uk@axson.com
PRODUCT BULLETIN
www.axson-technologies.com 800.344.7776 axsonmh@axson.com
31200 Stephenson Hwy Madison Heights, MI 48071 Ph 248.588.2270 Fax 248.588.5909
DESCRIPTION:
Fast Patch Paste TCC-5220 A/B is a two-part system designed to quickly make repairs or modifications to the PP-1052 Pattern Plank
.
This material is available in convenient self-mixing cartridges for ease of use. A dispensing gun must be used to dispense this material.
Patch Paste TCC-5220 A/B will cure rapidly and can be machined or sanded in approximately 15 – 20 minutes.
TYPICAL HANDLING CHARACTERISTICS @ 77 F (25 C)
Mix Ratio (by weight or volume) ………………………………………………………………….. Resin TCC-5220A ……………………….100 parts
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….100 parts
Pot Life (50 gram mass) …………………………………………………………………………………………………………………………………3 minutes
Hardness ……………………………………………………………………………………………………………………………………………………..80 – 85 Shore D
Viscosity ………………………………………………………………………………………………….. Resin TCC-5220A ……………………….26,000 cps
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….20,000 cps
………………………………………………………………………………………………………………. Mixed Viscosity …………………………..Paste
Specific Gravity …………………………………………………………………………………………………………………………………………….1.03g/cc
Color ……………………………………………………………………………………………………….. Resin TCC-5220A ……………………….Brown
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….Red
………………………………………………………………………………………………………………. Mixed Color ………………………………..Red
Machinability …………………………………………………………………………………………………………………………………………………Good
Time to Machine or Sand (depending on temperature) ……………………………………………………………………………………….15 – 20 minutes
Shelf Life (in original unopened containers) ………………………………………………….. TCC-5220A/TCC-5220B ………………2 years
Standard Size Available: 50ml cartridge
SANITARY PRECAUTIONS:
Do not take internally. Avoid prolonged breathing of vapors. Work in a well-ventilated area. Avoid skin contact. Protective gloves
should be worn. If contact occurs: wash skin with soap and water. Avoid eye contact. If contact occurs: rinse well with water for 15
minutes, contact physician.
STORAGE AND HANDLING:
To avoid moisture contamination, with each new nozzle purge small amount of material. Store at room temperature.
TCC-5220 Tech/Revised 1/30/15
Supersedes 6/20/14
The information contained in this technical data sheet results from research and tests conducted in our laboratories under precise conditions. Seller
cannot anticipate all conditions under which seller s products, or the products of other manufacturers in combination with seller s products, may be used.
It is the responsibility of the user to determine the suitability of the Axson Technologies products, under their own conditions, before commencing with
the proposed application. In no event shall Axson Technologies, Inc. be liable for any direct, indirect, punitive, incidental, special, and/or consequential
damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.
TCC-5220 A/B
FAST PATCH PASTE
FOR PP-1052
PATTERN PLANK