Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Coremat
XM is classified as non-hazardous according to
EC and OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Coremat XM
Product Code: M55002; M55003; M55004; M55010
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components None
Chemicals listed as dangerous
substances. None
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Coremat
XM in the original
package. Store in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-White with hexagonal pattern
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,050 – 0,080 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Fibre binder will dissolve in styrene
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None