by | Sep 27, 2025
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
A Quality Product from Hawkeye Industries, Inc.
Duratec
Thinner
A blend of solvents
formulated to enhance
the flow and leveling
properties of Duratec
primers and hi-gloss
coatings.
Features
Matches the solvent cut
of the Duratec product line.
Low HAPS
Low water content
Efficient: Small additions of
Duratec thinner quickly cut
the viscosity of Duratec
Primers and Topcoats.
Usage
For use with all Duratec products
requiring thinning prior to use.
Features
Duratec Thinner enhances
the flow and leveling
properties of Duratec primers
and hi-gloss coatings. The
end result is reduced porosity
and orange peel.
Duratec Thinner
39LAC-3
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Product No. 39 LAC-3
Duratec
Thinner
Product Properties: All time calculations are based on temperatures of 77 F, 25 C
Paint Related Material…………………………………………………………………………………………………………………………….. UN1263
Flash Point …………………………………………………………………………………………………………………………………………………. 23 F
Specific Gravity …………………………………………………………………………………………………………………….. .797 gm/cc @ 20 C
Weight per Gallon………………………………………………………………………………………………………………………………………6.65 lbs
Evaporation Rate………………………………………………………………………………………………………………. > 1 (n-butyl acctate = 1)
Vapor Pressure………………………………………………………………………………………………………………………………….. 41.3 mm hg
Revised 02-06-14
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Data Sheet
Continued
Page: 2
by | Sep 27, 2025
A Quality Product from Hawkeye Industries, Inc.
Duratec
Thinner
A blend of solvents
formulated to enhance
the flow and leveling
properties of Duratec
primers and hi-gloss
coatings.
Features
Matches the solvent cut
of the Duratec product line.
Low HAPS
Low water content
Efficient: Small additions of
Duratec thinner quickly cut
the viscosity of Duratec
Primers and Topcoats.
Usage
For use with all Duratec products
requiring thinning prior to use.
Features
Duratec Thinner enhances
the flow and leveling
properties of Duratec primers
and hi-gloss coatings. The
end result is reduced porosity
and orange peel.
Duratec Thinner
39LAC-3
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Product No. 39 LAC-3
Duratec
Thinner
Product Properties: All time calculations are based on temperatures of 77 F, 25 C
Paint Related Material…………………………………………………………………………………………………………………………….. UN1263
Flash Point …………………………………………………………………………………………………………………………………………………. 23 F
Specific Gravity …………………………………………………………………………………………………………………….. .797 gm/cc @ 20 C
Weight per Gallon………………………………………………………………………………………………………………………………………6.65 lbs
Evaporation Rate………………………………………………………………………………………………………………. > 1 (n-butyl acctate = 1)
Vapor Pressure………………………………………………………………………………………………………………………………….. 41.3 mm hg
Revised 02-06-14
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Data Sheet
Continued
Page: 2
by | Sep 27, 2025
A Quality Product from Hawkeye Industries, Inc.
Duratec
Thinner
A blend of solvents
formulated to enhance
the flow and leveling
properties of Duratec
primers and hi-gloss
coatings.
Features
Matches the solvent cut
of the Duratec product line.
Low HAPS
Low water content
Efficient: Small additions of
Duratec thinner quickly cut
the viscosity of Duratec
Primers and Topcoats.
Usage
For use with all Duratec products
requiring thinning prior to use.
Features
Duratec Thinner enhances
the flow and leveling
properties of Duratec primers
and hi-gloss coatings. The
end result is reduced porosity
and orange peel.
Duratec Thinner
39LAC-3
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Product No. 39 LAC-3
Duratec
Thinner
Product Properties: All time calculations are based on temperatures of 77 F, 25 C
Paint Related Material…………………………………………………………………………………………………………………………….. UN1263
Flash Point …………………………………………………………………………………………………………………………………………………. 23 F
Specific Gravity …………………………………………………………………………………………………………………….. .797 gm/cc @ 20 C
Weight per Gallon………………………………………………………………………………………………………………………………………6.65 lbs
Evaporation Rate………………………………………………………………………………………………………………. > 1 (n-butyl acctate = 1)
Vapor Pressure………………………………………………………………………………………………………………………………….. 41.3 mm hg
Revised 02-06-14
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Data Sheet
Continued
Page: 2
by | Sep 27, 2025
March 2016
458 Isopropyl Alcohol
Shell Chemicals
Technical Datasheet
Isopropyl Alcohol
Product Code
Region
Product Category
CAS Registry Number
Synonym(s)
Description
S1111
North America
Alcohols
67-63-0
2-propanol, IPA
Isopropyl Alcohol (IPA) is a solvent for epoxy and acrylic resins. ethyl
cellulose, polyvinyl butyral, alkaloids, gums, shellac, natural resins,
and many essential oils. It functions as a latent solvent in solvent
systems for nitrocellulose. It is a medium evaporating solvent and is
completely miscible with most solvents.
Typical Properties
Property Unit Method Value
Purity, min. %m/m GC 99.8
Water %m/m ASTM D1364 0.03
Acidity (as Acetic Acid) %m/m ASTM D1613 0.001
Density at 20 C kg/l ASTM D4052 0.785
Specific Gravity at 20 C/20 C – ASTM D4052 0.786
Specific Gravity at 25 C/25 C – ASTM D4052 0.783
Coefficient of Cubic Expansion at 20 C 10
-4
/ C Calculated 11
Refractive Index at 20 C – ASTM D1218 1.377
Color Pt-Co ASTM D1209 < 5
Boiling Point C - 82
Relative Evaporation Rate (nBuAc=1) - ASTM D3539 1.5
Relative Evaporation Rate (Ether=1) - DIN 53170 11
Antoine Constant A
#
kPa. C - 6.86618
Antoine Constant B
#
kPa. C - 1360.13
Antoine Constant C
#
kPa. C - 197.592
Temperature Limits for Antoine Equation
#
C - -10 to +90
March 2016
458 Isopropyl Alcohol
Vapor Pressure at 20 C kPa Calculated 4.1
Vapor Pressure at 50 C kPa Calculated 24
Saturated Vapor Concentration at 20 C g/m
3
Calculated 102
Volatile Organic Compound (VOC) g/l EU / EPA 785
Flash Point (Abel) C IP 170 12
Auto Ignition Temperature C ASTM E659 425
Lower Explosion Limit %v/v - 2.0
Upper Explosion Limit %v/v - 12
Electrical Conductivity at 20 C pS/m ASTM D4308 6*10
6
Dielectric Constant at 20 C - - 18.6
Freezing Point C - -88
Surface Tension at 20 C mN/m - 23
Viscosity at 20 C mPa.s - 2.4
Hildebrand Solubility Parameter (cal/cm
3
)
1/2
- 11.5
Hydrogen Bonding Index - - -16.7
Fractional Polarity - - 0.178
Heat of Vaporization at T
boil kJ/kg - 664
Heat of Combustion (Net) at 25 C kJ/kg - 31000
Specific Heat at 20 C kJ/kg/ C - 2.56
Thermal Conductivity at 20 C W/m/ C - 0.14
Miscibility at 20 C: Solvent in water %m/m - complete
Miscibility at 20 C: Water in solvent %m/m - complete
Azeotrope with Water: Boiling Point C - 80.3
Azeotrope with Water: Solvent Content %m/m - 87.4
Molecular Weight g/mol - 60
(#) In the Antoine temperature range, the vapor pressure P (kPa) at temperature T ( C) can be calculated by
means of the Antoine equation: log P = A - B/(T+C)
Test Methods
Copies of copyrighted test methods can be obtained from the issuing organisations:
American Society for Testing and Materials (ASTM) : www.astm.org
Energy Institute (IP) : www.energyinst.org.uk
Deutsches Institut f r Normung (DIN) : www.din.de
N.B: For routine quality control local test methods may be applied. Such methods have been validated against those
mentioned in this datasheet.
March 2016
458 Isopropyl Alcohol
Quality
Isopropyl Alcohol as produced and delivered complies with ACS 10th Edition Reagent Grade
(General Use), ASTM D770, DIN 53245 and FED MIL Spec TT-I-735A.
Isopropyl Alcohol does not contain detectable quantities of polycyclic aromatics, heavy metals or
chlorinated compounds.
Hazard Information
For detailed Hazard Information please refer to the Safety Data Sheet on ww.shell.com/chemicals.
Storage Handling
Provided proper storage and handling precautions are taken we would expect Isopropyl Alcohol to be
technically stable for at least 12 months. For detailed advice on Storage and Handling please refer to
the Safety Data Sheet on www.shell.com/chemicals.
All products purchased or supplied by Shell chemicals companies are subject to the terms and conditions set out
in the contract, order confirmation and/or bill of lading. All other information supplied by Shell chemicals
companies, including that herein, is considered accurate but is furnished upon the express condition that the
customer shall make its own assessment to determine a product s suitability for a particular purpose. Except as
may be set forth in the applicable contract, order confirmation and/or bill of lading, Shell chemicals companies
make no warranty, express or implied, including regarding any information supplied or the data upon which it is
based or the results to be obtained from the use of such products or information, or concerning product, whether
of satisfactory quality, merchantability, fitness for any particular purpose or otherwise, or with respect to
intellectual property infringement as a result of use of information or products, and none shall be implied.
The expression Shell Chemicals refers to the companies of the Royal Dutch/Shell Group that are engaged in
chemical businesses. Each of the companies that make up the Royal Dutch/Shell Group of companies is an
independent entity and has its own separate identity.
by | Sep 27, 2025
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 01/2022
COR50-ZZ-11506
Inhibitor Solution
Technical Data Sheet
COR50-ZZ-11506 is an inhibitor solution of 10% Tertiary Butyl Catechol (TBC) in styrene.
This inhibitor is used to lengthen the gel time and increase the storage stability of unsaturated
polyester resins. This material has no shelf life restrictions.
GENERAL INSTRUCTIONS FOR USE
Adjustment for 10 minutes of gel time in a general polyester resin 0.09%
Note:
Inhibitor may be very active when trying to adjust very long gel times (over 35 minutes).
Interplastic Corporation s Research and Development Laboratory recommends a conservative
addition to a small amount or resin followed by a gel time test to be certain this inhibitor is
appropriate before use in production.
This method is not a guarantee of precise gel time results.
TYPICAL PROPERTIES RESULTS
Refractive Index 1.538 1.548
by | Sep 27, 2025
Page 1 of 1
Technical Data Sheet
Heptane
Test UoM Method Min Max Typical
API Gravity @ 60 F
D4052 62.2
Specific Gravity @ 20/20 C
D4052 0.7080 0.7680 0.7305
Color, Saybolt
D156 25 30
Flash, TCC
F D56 32
Distillation, IBP
C D86 85 97
Distillation, 10%
C D86 102 99
Distillation, 50%
C D86 107 100
Distillation, 90%
C D86 121 105
Distillation, EP
C D86 143 110
Water Content
ppm D1533 500 17
Benzene Content, ppm
CCVM < 1
Aromatics
Wt. % D6729 1.00 0.10
Kauri-Butanol Value
D1133 30.0 45.0 32.5
Doctor Test
D235 Negative
Acidity
Pass Pass
Spot Test
Negative
Non-Volatile Matter
g/mL D1353 0.005 0.00
Acrylic Crazing Test
Pass Pass
Appearance
Visual B/C B/C
Copper Corrosion
D130 Pass Pass
Odor
Organoleptic Pass Pass
Extra Notes: Product meets TT-N-95 B Type I & II
These specifications are typical and represent the quality of our product in general. The information
herein is to assist customers in determining whether out product is suitable for their applications. Our
product is intended for sale to industrial and commercial customers. We recommend that customers inspect
and test our products before use and satisfy themselves as to content and suitability. We warrant that our
products will meet our written specification. Nothing herein shall constitute any other warranty expressed
or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Health and safety information, as well as safe handling instructions are available through
our Safety Data Sheet for this product. For more information about our products, please call (323)245-
2345.
Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
