by | Sep 27, 2025
ISO 9001-2015 REGISTERED
Technical Data Sheet
————————————————————————————————–
———————————————————————————————————————————————–
H
ARWICK STANDARD MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE GOODS OR USES OF THE GOODS
OR PERFORMANCE OF THE GOODS AND MAKES NO WARRANTIES OF THE FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY .
B
UYER ACKNOWLEDGES THAT HARWICK STANDARD WILL NOT BE LIABLE FOR CONSEQUENTIAL , INCIDENTAL, DIRECT, OR SPECIAL DAMAGES
ARISING
, DIRECTLY, OR INDIRECTLY, IN RESPECT TO SUCH GOODS OR THE USE OR FAILURE THEREOF, WHETHER BASED ON BREACH
OF WARRANTY, NEGLIGENCE, STRICT LIABILITY IN TORT OR OTHERWISE.
HARWICK STANDARD DISTRIBUTION CORPORATION
60
S. SEIBERLING ST.
P.O. BOX 9360
AKRON, OH 44305-0360
U.S.A.
P
HONE: (330) 798-9300
www.harwick.com
Stan-Mask Fragrances
Stan-Mask Fragrances are re-odorants that can be used at low amounts in a formula to mask an
objectionable odor and/or provide a pleasant fragrance to a finished product.
Several fragrance varieties are available to suit your specific needs. The most popular are listed below.
Fragrance Types
Bubblegum Vanilla
Floral Citrus Sweet
Sweet Strawberry Lemon
Wintergreen Cinnamon Spice
Chamomile Peach
Baby Powder Pine
Green Leafy Woody Lavender
01/02/2020 Revised 11/12/2021
by | Sep 27, 2025
HARWICK
STANDARD
ISO 9OO1-2015 REGISTERED
Product SPecification
PRODUCT DESIGNATION: Stan-Mask 21600
PRODUCT DESCRIPTION:
Lemon Odor
Light Yellow to Yellow Liquid
Typical Flash Point (CC) 202″F
SPECIFICATION
PROPERTIES
Refractive Index, 25oC
Specific GravitY, 25″C
LIMITS
1.472L-L.4921
0.8s33-0,8733
Shelf Lifeone (1) year in tightly sealed, full containers stored in a cool, dry place away from
direct sunlight
08/04/ 1998 Revised 0s | 02 I 2019
HARWICK STANDARD MAKES NO WARMNTIES, EXPRESS OR IMPLIED’ WTTH RESPECT TO IHE GOODS OR USES OF TI-iE GOODS
OR PERFORMANCE OF THE GOODS AND MAKES NO WARMNTIES OF THE FITNESS FOR PARTICUI-AR PURPOSE OR MER’CHANTABIIITY’
Buvra ncxruOWrEDGES THAT Hnnwrcr Srnltonno wlLL NOT BE LIABLE FOR CONSEQUENIAL/ TNCIDENTAL’ DIRECT’, OR SPECTAL DAMAGES
ARISING/DIRECTLY/oRINDIRECTLY’INRESPECTToSUCHGooDsoRTHEUSEoRFAILuRETHEREoF,WHETHEREASEDoNBREACH
OF WARMNTY, NEGUGENCE, STRICT LIABIUTY ]N TORT OR OTHERWISE’
HARwIcKsTANDARDDISTRIBUTIoNcoRPoRATIoN
6o s. irieenLrnc Sr.
. p.o.
BOX 9360 ‘AKRON, on 44305-0360 ‘u.s’A.
PHoNE: (330) 798-9300 ‘FRx: (330) 798-0214
www.harwick’com
by | Sep 27, 2025
22695 Old Canal Road, Yorba Linda, CA 92887 p 714.279.9928 f 714.279.0307
MATERIAL SPECIFICATION
To: Revchem Bloomington
2720 S. Willow Ave
Bloomington, CA 92316
Attn: Russ Tell
Part Number 564381
Part Description 35.5 Rubber Squeegee
Material Natural Rubber
Tensile 1160 psi
Elongation 200%
Hardness 70-75 Shore A
Compression Set 50% max
Heat aged, test method D573, 70 hours at 70 C
Change in tensile strenth +/-30%
Change in elongation -50% max
Change in hardness +/-15 points
Pacifictech Molded Products, Inc. Date: February 10, 2025
by | Sep 27, 2025
Specifications:
Appearance @ 25 deg. C – Clear liquid Clear liquid
Color (APHA, as is, W657) <=40
% 1,4-Butanediol (GC, W1584) <=0.1
% Purity (GC, W1584) >=99.5
% Moisture (Karl Fischer, W956) <=0.1
% Free Acid (Hydroxy Butyric Acid, TC100501 or CCLM042) <=0.1
Butyrolactone
Chemical Description:
gamma-Butyrolactone (M.W. 86)
1/10/2019
826670, 826671,
826673, 826675,
826676, 881580
8/6/2020 Printed: Page1 of 1
Sales Specifications
Report Id : WH0294
www.ashland.com Ashland Specialty Ingredients
8145 Blazer Drive, Wilmington, DE 19808
Tel: ( 302 ) 594-5000
by | Sep 27, 2025
Property
Test
Method
Value
Uncured Product
23 +/- 2 C and 50 +/-5% humidity
Color Pale Yellow
Cure Profile
23+/-2 C and 50+/-5%
humidity
Density
BS ISO
2781
0.83 g/cm3
Flash Point C
BS 2000-
34
28 C
Odour Alcohol
Rheology Liquid
Tack Free Time / Skin
Formation at 23 C/73 F
15 min
Viscosity Mixed Brookfield1 cP
Storage
Max Storage Temperature 25 C / 77 F
Min Storage Temperature 5 C / 41 F
Shelf Life 18 mths
Primer No. 6
Primer
Description
This is a specially formulated silicone based primer for use with a
wide range of CHT 1K Condensation / Moisture curing RTV
silicone sealants. This primer imparts good adhesion to most
metals. It is recommended as a primer for use on non-porous
surfaces. For all new applications, it is recommended that
customers carry out small-scale tests to determine the suitability
of the primer and the strength of bond produced.
Key Features
Aerospace approved
Suitable for use with CHT adhesives
Suitable for non porous surfaces
For use with most metals
Key Applications
Rolls Royce MSRR1064
Application
Primer for condensation cure 1 part adhesives on metal
substrates. Not suitable for polycarbonate and acrylic
Use and Cure Information
This primer contains solvents which are classified as hazardous
under current regulations. Users should read the Safety Data
Sheets for this product carefully before use. Surfaces to be
bonded should be dry and free from grease, oil, dust and release
agents. Non-porous substrates, should be solvent degreased prior to application. The primer should be applied with a lint-free cloth or
paintbrush and allowed to dry thoroughly at room temperature for a minimum time equal to the tack free time given in this document, before
applying the sealant. Drying should be carried out in a well-ventilated area. Do not leave longer than 2 hours. The drying/curing time is
dependent on the ambient temperature and humidity. Heat should not be applied to accelerate the drying cycle. Over-application of the
primer will result in poor adhesion. As a guide, one litre of Primer should be sufficient for approximately 15 m . It is absolutely important to
check the compatibility in preliminary tests if unknown substrates are used.
Health & Safety
Safety
Please observe the safety data sheets and the safety statements on the container labels when handling our products. The dangerous goods
regulations and the accident prevention regulations of the professional associations must be particularly observed. Keep the safety data
sheet of the applied product at hand since it provides useful instructions for the safe use and disposal of the product as well as for actions to
be taken in case of accidents.
Revision Date 01 Mar 2024
Revision No 2
Download Date 22 Oct 2024
TECHNICAL DATA SHEET
The content set out in the technical data sheet does not contain information upon which you should rely. It is provided for general information purposes only and does not constitute a product
specification. You must obtain professional or specialist advice before taking any action based on the information provided in the technical data sheet.
CHT make reasonable efforts to ensure that information set out in the technical data sheet is complete, accurate, and up-to-date. CHT do not, however, make any representations, warranties or
guarantees (whether express or implied) that information set out in the technical data sheet is complete, accurate, or up-to-date or that the product will be suitable for your requirements. You
should carry out your own testing to determine the applicability of such information and whether the product will be suitable. CHT reserve the right to modify the technical data sheet at any time.
The CHT technical service department is available to offer further information and advice and should it be needed to look at modifying current products or custom formulate a new one to meet
your specific requirements. Please contact the technical service department.
CHT Germany GmbH: Postfach 12 80, 72002 T bingen, Bismarckstra e 102, 72072 T bingen, Germany
Telephone: 07071/154-0, Fax: 07071/154-290, Email: info@cht.com, Homepage: www.cht.com / www.cht-silicones.com
