by | Sep 27, 2025
P
RODUCT S PECIFICATIONS
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a sample
reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 42.43%
Weight per gallon 9-10 lbs. +/- .5*
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 2000
POLISHING COMPOUND
PR O D U C T # AB2000
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of fine s
cratches
from gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
Elevate true gloss of
gelcoat and paint surface.
MAXIMUMSPECIFICATIONS
80,000 CPS 160,000 CPS
45.43%
% Binders 14.10% 16.10%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff 2000
blend is on average, 80% 40 microns particle size; 10% smaller than 40 microns; 10% greater
than 40 microns.
Color WHITE
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
An economical and environmentally friendly choice for a clean, true,
high-gloss surface! Aqua-Buff is a water-based polishing compound
designed to remove fine scratches (1000-grit or higher) and swirl
marks. Often paired with Aqua-Buff 1000F Fast-Cut or Aqua-Buff
1000W Medium -C
ut compounds.
SAFETY & HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
c
ontrol in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, however no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mol
d growth. For more detailed
instructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement: Our products are intended for sale to
industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit. Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is
protection from any law or patent
to be inferred.
Aqua Buff is sold by container and weight is not guaranteed. All patent and
trademark rights are reserved.
REVISED MAY 2025
% Solids 39.47% 42.47%
*Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PR O D U C T # A B2000
PLEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech Team at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-
Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-
Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000
require water in conjunction with
application. The person
doing the polishing adds water by spraying a mist onto the part. The
buffing pad captures the compound/polish along with the water. When the part appears dry, add
more water with the spray
bottle. As long as a milky liquid appears when the pad captures the
water additional polish is not needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-
Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP: A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a blue
haze on oxidized gelcoat or white gelcoat.
Aqua-Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
AQUA-BUFF 2000
POLISHING COMPOUND
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua-
Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Quality ConcernComments:
Mousse-like texture
Density variations can occur emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000W
MEDIUM-CUT COMPOUND
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
*AB1000W is a blue-green color,
and not recommended for
white hulls
KEY USES
REVISED JANUARY 2025
S AFETY & HAN DL
I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-
Buff formulations contain a biocide to inhibit mold growth, however no
biocide has unlimited capacity
to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
instructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
c
ommercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or cons
equential damages, including
damages caused in transit. Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred.
Aqua Buff is sold by container and weight is not guaranteed. All patent and
trademark rights are reserved.
PR O D U C T # AB1000W
DE
SCRIPTION
Water-based medium-cut compound for aggressive removal of
sanding scratches or oxidation. Used to remove scratches and polish
composite patterns, plugs, masters, and product molds. Also a great
choice to remove scratches and to clean FRP parts, metal, and painted
surfaces
PRODUCT SPECIFICATIONS
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000W blend is on average, 80% 40 microns particle size; 18% are greater than 78 microns;
2% are greater than 154 microns.
Color BLUE
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
AQUA-BUFF 1000W
BUFFING COMPOUND
PR O D U C T # A B10 00W
P
LEASE NOTE
The following use instructions are broad to address multiple applica
tions. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication.
Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua
-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua
-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur. Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000W
MEDIUM-CUT COMPOUND
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
*AB1000W is a blue-green color,
and not recommended for
white hulls
KEY USES
REVISED JANUARY 2025
S AFETY & HAN DL
I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-
Buff formulations contain a biocide to inhibit mold growth, however no
biocide has unlimited capacity
to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
instructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
c
ommercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or cons
equential damages, including
damages caused in transit. Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred.
Aqua Buff is sold by container and weight is not guaranteed. All patent and
trademark rights are reserved.
PR O D U C T # AB1000W
DE
SCRIPTION
Water-based medium-cut compound for aggressive removal of
sanding scratches or oxidation. Used to remove scratches and polish
composite patterns, plugs, masters, and product molds. Also a great
choice to remove scratches and to clean FRP parts, metal, and painted
surfaces
PRODUCT SPECIFICATIONS
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000W blend is on average, 80% 40 microns particle size; 18% are greater than 78 microns;
2% are greater than 154 microns.
Color BLUE
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
AQUA-BUFF 1000W
BUFFING COMPOUND
PR O D U C T # A B10 00W
P
LEASE NOTE
The following use instructions are broad to address multiple applica
tions. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication.
Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua
-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua
-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur. Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000W
MEDIUM-CUT COMPOUND
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
*AB1000W is a blue-green color,
and not recommended for
white hulls
KEY USES
REVISED JANUARY 2025
S AFETY & HAN DL
I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-
Buff formulations contain a biocide to inhibit mold growth, however no
biocide has unlimited capacity
to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
instructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
c
ommercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or cons
equential damages, including
damages caused in transit. Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred.
Aqua Buff is sold by container and weight is not guaranteed. All patent and
trademark rights are reserved.
PR O D U C T # AB1000W
DE
SCRIPTION
Water-based medium-cut compound for aggressive removal of
sanding scratches or oxidation. Used to remove scratches and polish
composite patterns, plugs, masters, and product molds. Also a great
choice to remove scratches and to clean FRP parts, metal, and painted
surfaces
PRODUCT SPECIFICATIONS
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000W blend is on average, 80% 40 microns particle size; 18% are greater than 78 microns;
2% are greater than 154 microns.
Color BLUE
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
AQUA-BUFF 1000W
BUFFING COMPOUND
PR O D U C T # A B10 00W
P
LEASE NOTE
The following use instructions are broad to address multiple applica
tions. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication.
Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua
-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua
-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur. Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
Chem-Trend L.P. | 1445 W. McPherson Park | Howell, Michigan 101816
Tel 517.546.4520 | U.S./Canada: 800-727-7730 | Fax: 517-548-5370 | ChemTrend.com
Chemlease
70 EZ
Release Agent
Description
Chemlease
70 EZ is a unique semi- permanent mold
release system developed specifically for the composites
industry, for use where a high quality finish is required.
Benefits
HAPs free*
Multiple releases between applications
Easy to apply
Eliminates the use of wax
Reduces labor time and costs
Provides excellent gloss
High temperature stability
Does not build up on the mold surface
Minimal transfer to molded part
* HAPs are not formula constituents of this product. Standard
manufacturing processes may result in trace quantities
[<0 .1%] of HAPs.
Chemlease
solvent carriers contain no Class I or II registered
ozone depleting substances.
Mold Preparation
1. Mold surfaces should be thoroughly cleaned to remove all traces
of wax, release agents, sealers and buffing compounds.
2. Do a final cleaning of mold surface with
Chemlease
Mold Cleaner.
3. Seal mold with the appropriate Chemlease
Sealer.
Application
1. Mold surface must be thoroughly cleaned to remove all traces
of wax, release agents, and other sealers.
2. Surface should be dry and free of contaminants.
3. Saturate clean cotton cloth (not dripping) and wipe on a smooth
continuous film. Apply no more than a few square feet at a
time.
4. When the film begins to evaporate at the edge, wipe the
surface with a second clean dry cotton cloth. Use a circular
motion from the outside, working inwards until film is left dry
and clear. See Notes.
5. Repeat above procedures until entire mold surface has been
covered.
6. Apply 4-5 coats, allowing 15 minutes between each complete
coat.
7. Allow 30 minutes for full cure. Proceed with production.
Notes
Time will vary with room and mold temperature. Wipe off as the
solvent begins to evaporate. If the release agent is left on too
long, you may notice some smearing or streaking. To remove the
smear or streak, rub the affected area with the recommended
Chemlease
release agent, and then simply remove the excess
sooner than you had before.
Test To Ensure Proper Application
Attach a small strip of masking tape to different areas of the mold.
There should be very little resistance when removing the tape if
proper release is applied. Compare to an untreated mold. (Tape
should adhere to untreated mold).
Touch-Up Coats
Once in production the release film will begin to wear. Rather than
applying a touch-up coat once the parts begin to stick, it is better to
do preventative maintenance. For example, if trials determine that
20 releases are obtainable between touch-up coats, it is better to
reapply a touch-up coat after every 15 cycles or at the end of every
second shift. The above-described action will keep the molds in
production longer and help establish a routine of quality
preventative maintenance.
Important
The recommended number of coats and cure times are a general
guideline found to be more than sufficient in a broad spectrum of
molding conditions. When molding products with extreme
geometries or experiencing low-humidity conditions in the shop,
the customer may find the need to extend the cure time between
coats and increase the number of coats applied to the mold. The
efficiency of a release film is best determined through a
combination of tape tests and experimentation.
Storage
Do not store at temperatures above 49 C/120 F. Keep container
tightly sealed to prevent evaporation and/or contamination. If
stored in cold temperatures allow warming to room temperature
before using.
Packaging
Chemlease
70 EZ is available in a variety of package sizes.
Please contact Chem-Trend customer service for details.
Safety Data
Safety Data Sheets are available for all Chemlease
products and
should be consulted prior to use of the product.
While the technical information and suggestions for use contained herein are believed
to be accurate and reliable, nothing stated in this bulletin is to be taken as a warranty
either expressed or implied.
Further Information
Request information on our complete range of materials: custom-
formulated release agents for polyurethane molding; tire lubes and
bladder coatings; Mono-Coat
semi-permanent release coatings;
aerosol formulations; mold cleaners and sealers; specialized coatings
and application equipment.
by | Sep 27, 2025
by | Sep 27, 2025
1.
Chem-Trend L.P.
1445 W. McPherson Park Drive, P.O. Box 860, Howell, MI 48844.0860
Telephone: 517.546.4520 Facsimile: 517.548.5370 US/Canada: 800.727.7730
Copyright 2004 Chem-Trend L.P., All Rights Reserved
121608
www.chemtrend.com
Description
Chemlease
41-90 EZ is a rapid curing semi-
permanent mold release agent that provides multiple
releases with minimal transfer to the molded part.
Chemlease
41-90 EZ a high slip version of the
Chemlease
41 family; primarily for closed molding of
abrasive or low draft parts.
Benefits
x HAPs Free*
x High thermal stability
x Easy to apply
x Multiple releases between applications.
x Reduces labor time and cost
*HAPs are not formula constituents of this product. Standard
manufacturing processes may result in trace quantities
[<0 .1%] of HAPs.
Chemlease
solvent carriers contain no Class I or II
registered ozone depleting substances.
Mold Preparation
1. Clean mold surface to remove all traces of waxes,
release agents and sealers.
2. Clean mold with Chemlease
Mold Cleaner.
3. Apply the appropriate Chemlease
Sealer to new
or porous molds (contact a Sales Rep or
Distributor for details).
Application Instructions for Base Coats
To the cleaned/sealed mold surface:
1. Using a wetted clean cotton cloth or fine mist
spray pattern, wipe or spray on a smooth, wet,
(not runny) continuous film over the entire mold
surface. With a second, clean, dry cotton cloth,
before film dries wipe off any excess on the mold
surface.
2. Allow film to cure for 15 minutes.
3. Apply a total of 3-5 coats per the above
instructions.
4. Allow final coat to cure for 30 minutes at room
temperature.
Touch-Up Coats
Reapply one light coat as required and cure as for final
coat.
Important
The recommended number of coats and cure times
are a general guideline found to be more than
sufficient in a broad spectrum of molding conditions.
When molding products with extreme geometries or
experiencing low-humidity conditions in the shop, the
customer may find the need to extend the cure time
between coats and increase the number of coats
applied to the mold. The efficiency of a release film is
best determined through a combination of tape tests
and experimentation.
Storage
Do not store above 49 C/120 F. Keep container
tightly sealed to prevent evaporation and/or
contamination. If stored in cold temperatures, allow to
warm to room temperature before using.
Packaging
Chemlease
41-90 EZ is available in 1 gallon, 5
gallon, and 55 gallon quantities.
Safety Data
Material Safety Data Sheets are available for all
Chemlease
products and should be consulted prior to
use of the product.
While the technical information and suggestions for use contained
herein are believed to be accurate and reliable, nothing stated in this
bulletin is to be taken as a warranty either expressed or implied.
Chemlease
41-90 EZ
Semi-Permanent Release Agent
