35TP556771_TDS.pdf

by | Sep 27, 2025

PRODUCT SHEET
MASKING TAPE MTY
MARKETS
Automotive

Marine &
Comp
FORMS
Roll
FEATURES BENEFITS
Excellent adhesion >
Good mechanical strength
Flexible >
Easy to shape on
contours
Solvent resistant >
Paint will not bleed
Consistency of thickness>
Uniform paint edge
Easy roll release >
Easy to apply
Page 1/2 – Printed in 2017-10-05

PRODUCT SHEET
MASKING TAPE MTY
PRODUCT SPECIFICATIONS
Backing Colour Size Thickness Adhesive
Adhesion
to steel
Elong.
Temp.
range
Crepe PaperYellow 18mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow 24mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow36mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow 48mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Page 2/2 – Printed in 2017-10-05

35TP556740_TDS.pdf

by | Sep 27, 2025

PRODUCT SHEET
MASKING TAPE MTY
MARKETS
Automotive

Marine &
Comp
FORMS
Roll
FEATURES BENEFITS
Excellent adhesion >
Good mechanical strength
Flexible >
Easy to shape on
contours
Solvent resistant >
Paint will not bleed
Consistency of thickness>
Uniform paint edge
Easy roll release >
Easy to apply
Page 1/2 – Printed in 2017-10-05

PRODUCT SHEET
MASKING TAPE MTY
PRODUCT SPECIFICATIONS
Backing Colour Size Thickness Adhesive
Adhesion
to steel
Elong.
Temp.
range
Crepe PaperYellow 18mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow 24mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow36mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Crepe PaperYellow 48mm x 50m 0,145 mm Natural Rubber300g / cm 9% 110 C / 1hr
Page 2/2 – Printed in 2017-10-05

34SO106A_TDS.pdf

by | Sep 27, 2025

2018 J.M. Huber Corporation. Huber and the Huber logo are registered trademarks of J.M. Huber Corporation.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS F OR A PARTICULAR PURPOSE. Refer to
Huber’s Standard Conditions of Sale for the only express warranties applicable to the Huber products. Products incorporating
Huber products are not warranted by Huber. In no event is Huber liable for consequential damages. Revised 11/18

SB 432
ALUMINUM HYDROXIDE
(ATH)

DESCRIPTION

SB-432 ATH developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle
size distribution that provides the best possible combination of viscosity, flame, electrical and molding
properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction
yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface
profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout
the molded part.

Chemical Property Unit Typical Value
Al(OH)
3 % 99.6
SiO
2 % 0.005
Fe
2O3 % 0.007
Na
2O (total) % 0.24
Na
2O (soluble) % 0.03
Loss on Ignition (1000 C) % 34.6
Physical Property Unit Typical Value
Screen Analysis
on 325 Mesh % 0.1
through 325 Mesh % 99.9
% on less than 10 microns % 53
Median Particle Diameter Microns 9
BET Surface Area* m
2
/g 2
Free Moisture @105 C % 0.3
Specific Gravity gm/cm
3
2.42
Bulk Density, loose gm/cm
3
0.65
Bulk Density, packed gm/cm
3
1
TAPPI Brightness** 89
Oil Absorption*** ml 28

*
As measured with Micromeritics Tristar surface analyzer (BET)
** TAPPI Brightness measured with the Hunterlab Colorimeter
*** Oil Absorption, ml, boiled linseed oil per 100 gm filler

phone: (866) 564-8237
fax: (678) 247-2797
e-mail: hubermaterials@huber.com
www.hubermaterials.com

35TP16166_TDS.pdf

by | Sep 27, 2025

Technical Data Sheet
3M PTFE Skived Film Tape 5480
English-US
Last Revision Date: June, 2024
Supersedes: October, 2016
Product Details Regulatory Info/SDS
Product Description
3M PTFE Skived Film Tape 5480 offers an extremely low coefficient of friction which, in combination with a pressure
sensitive silicone adhesive, creates a smooth, non-stick surface over a variety of substrates to assist in the movement of
web materials in many types of roll-wrap applications
Product Features
Skived 3M PTFE Film Tapes are more conformable than typical extruded PTFE film tapes.
Provides excellent chemical resistance except to organic solvents. Note: The silicone adhesive will be attacked by
commercial organic solvents and so are not recommended for applications requiring organic resistance.
Silicone adhesive provides clean removal from a variety of surfaces.
Non-stick PTFE film provides an exceptionally slick surface for easy clean-up.
Technical Information Note
The following technical information and data should be considered representative or typical only and should not be used
for specification purposes.
Typical Physical Properties
Attribute Name Test Method Value
Color Gray
Adhesive Type Silicone
Backing Skived PTFE (polytetrafluorethylene)
Backing Thickness ASTM D3652 0.05 mm (2 mil)
Total Tape Thickness ASTM D3652 0.09 mm (3.7 mil)
Typical Performance Characteristics
Attribute Name Test Method Temperature Value
180 Peel Adhesion ASTM D3330 22 C (72 F) 2.2 N/cm (20 oz/in)
Elongation at Break ASTM D3759 140 %
Tensile Strength ASTM D3759 46.1 N/cm (416 oz/in)
Long Term Temperature
Resistance
260 C (500 F)
Minimum Long Term
Temperature Resistance
-54 C (-65 F)
12 in/min (300 mm/min)
Long Term (day, weeks)
3M PTFE Skived Film Tape 5480 | English-US 1/2

Handling/Application Information
Application Examples
Easy-release surface provided by wrapping rollers, plates, belts, etc. where build- up of sticky materials and inks can
occur.
Shielding and protecting against chemicals.
Mold release for composite or metal bonding.
High temperature wire bundling and harnessing.
High strength and abrasion resistance reduce friction between surfaces, minimizing squeak and noise.
Wide temperature range for performance on heated machinery and equipment.
CAUTION:When PTFE film tape is exposed to temperatures above 600 F (316 C), small quantities of hazardous vapors
may be released. INHALATION OF THESE VAPORS MAY BE HARMFUL OR MAY CAUSE RESPIRATORY TRACT IRRITATION.
Do not heat or expose PTFE film tape to temperatures above 600 F (316 C).
Storage and Shelf Life
Store under normal conditions of 16 to 27 C (60 to 80 F) and 40 to 60% relative humidity in the original packaging,
out of direct sunlight. For best performance, use this product within 24 months from date of manufacture.
Available Sizes
Attribute Name Value
Standard Roll Length 32.9 m (36 yd)
Information
Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based
upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not
guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the
information. No license under any 3M or third party intellectual property rights is granted or implied with this information.
Product Selection and Use: Many factors beyond 3M s control and uniquely within user s knowledge and control can affect the use and performance of
a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate
and suitable for customer s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g.,
OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations,
may result in injury, sickness, death, and/or harm to property.
Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product
literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the
product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a
3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of the
purchase price.
Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or
damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or
business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or
packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the
applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards
(e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations, and the user must take any action required under any
recall, field action or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with
product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information,
visit www.3M.com.
ISO Statement
This product was manufactured under a 3M quality system registered to ISO 9001 standards.
3M Industrial Adhesives and Tapes Division
3M Center, St. Paul, MN 55144-1000
3M.com/iatd
3M is a trademark of 3M Company.
3M 2024 (6/24)
3M PTFE Skived Film Tape 5480 | English-US 2/2

34RJ822_TDS.pdf

by | Sep 27, 2025

34RJ204_TDS.pdf

by | Sep 27, 2025

34CAL200_TDS.pdf

by | Sep 27, 2025

Physical Characteristics

TEST
Granulometry

Retained on MESH 200 5.0% ISO 787R/7
Retained on MESH 325 15.0% ISO 787R/7

Specific Weight 2.7
Refraction Index 1.6

Mohs Hardness 3.0

Bulk Density (loosely packed) 1.6gr/cm
3

Calcium Carbonate
White Marble Dinamita M rmol

PARTICLE DISTRIBUTION

All data shown correspond to average values representative of production, so that should
be considered for information purposes only and not contract values.

Revert Minerals Am rica

Domicilio Conocido 35100

Central

Ctra. N-340 Km. 1.196

F brica Albox Almer a

Pol gono Industrial

Revert GmbH

Weisshausstrasse 26
Dinamita E-43719 Bellvei (Tarragona) E-04800 Albox (Almer a) D-50939 Colonia
Tel.: + 52 (871)75160 20 Espa a Espa a Alemania
Fax: + 52 (871)75160 25 Tel.: + 34 977 168 103 Tel.: + 34 950 633 004 Tel.: + 49 (0) 221 942012 0
www.reverte-na.com sales@reverte-na.com Fax: + 34 977 168 112 Fax: + 34 950 633 147 Fax: + 49 (0) 221 413795

Main Applications

Paints, plastics, coatings, plaster, fiberglass,
adhesives, vinyl flooring, drilling fluids, filtration
systems where it is needed to reduce the acidity,
water treatment, ceramics, polymeric marble, PVC
compounds and as an additive in animal feed.
Chemical Composition
CaCO3 98.0 %
MgCO3 <1.0 % Fe2O3 50 ppm SiO2 < 0.1 % Los son ignition 43.7 % Insoluble in Acid 0.20 % MEASURED ON I.C.P. Microcarb 200 UW

34AFL_TDS.pdf

by | Sep 27, 2025

The Featherlite Series is designed specifically for our Featherlite
product line. Just as its name suggests,
Featherlite is an ultra-light filler formulated for cast polymer applications as a means to reduce product
weight. Currently, the Featherlite Series entails:
FL-12, offering a 12% weight reduction with a resin demand of 25%
FL-20, offering a 20% weight reduction with a resin demand of 27%
FL-30, offering a 30% weight reduction with a resin demand of 37%
FL-50, offering a 50% weight reduction with a resin demand of 47%
FL-1000, offering a 50% weight reduction with a resin demand of 50%*
FL-1700 is a concentrate, offering a variable 5 to 50% weight reduction depending on the amount
used.
FL-1500 is similar to the FL-1700 product line, but with a lower true density.
Each of the Featherlite products come ready-to-use with the addition of resin. A standard marble resin is all
that is required when using Featherlite. With its bright white color, which requires little or no
titanium dioxide, Featherlite is an attractive alternative to other products on the market.
Products made with Featherlite have shown to have a better thermal shock performance
than those without. Featherlite incorporates plastic micro spheres, which have an elastic property that
allows the sphere to stretch and compress while subjected to stress. This elasticity will absorb stress
and significantly reduce the likelihood of stress fractures and cracking. The end result is better thermal cycle
with little to no stress cracks caused from hot cures in the mold.

Applications
Used in polyester resin casting
applications
Direct replacement for cultured marble
Ideal for backfilling large tubs and
shower pans
Key Benefits
Dramatically improves flexural strength
Enhances thermal cycle performance
Increase impact resistance
Lower VOC emissions

Featherlite

FL-20 Physical Properties
Mean Particle Size 80
Dry Color White
True Density 1.9 g/cc
Free Moisture Content < 0.1% Bulk Density 1.5 g/cc Availability & Packaging: Lead time is typically less than five days. Packaged in 50 lb bags or 2,000 lb super sacks. FL-30 Physical Properties Mean Particle Size 80 Dry Color White True Density 1.5 g/cc Free Moisture Content < 0.1% Bulk Density 1.0 g/cc Availability & Packaging: Lead time is typically less than five days. Packaged in 40 lb bags or 1,500 lb super sacks. FL-50 Physical Properties Mean Particle Size 80 Dry Color White True Density 0.9 g/cc Free Moisture Content < 0.1% Bulk Density 0.4 g/cc Availability & Packaging: Lead time is typically less than five days. Packaged in 25 lb bags or 1,200 lb super sacks. FL-1000 Physical Properties Mean Particle Size 45 Dry Color White True Density 0.9 g/cc Free Moisture Content < 0.1% Bulk Density 0.5 g/cc Availability & Packaging: Lead time is typically less than five days. Packaged in 25 lb bags or 1,200 lb super sacks. 4 P V U I 5 I J S E " W F O V F 5 V D T P O " ; r d X X X B D T U P O F D P N No. AK0407 Featherlite Series FL 20 FL 30 FL 50 FL 1000 *FL-1000 is a finer (smaller) material than the FL-50. FL 1700 FL-1700 Physical Properties Mean Particle Size 80 Dry Color White True Density 0.7 g/cc Free Moisture Content < 0.1% Bulk Density 0.9 g/cc Availability & Packaging: Lead time is typi- cally less than five days. Packaged in 19 lb bags or 1,500 lb super sacks. FL-12 Physical Properties Mean Particle Size 80 Dry Color White True Density 2.2 g/cc Free Moisture Content < 0.1% Bulk Density 1.7 g/cc Availability & Packaging: Lead time is typically less than five days. Packaged in 50 lb bags or 2,500 lb super sacks. FL 12 FL 1500 FL-1500 Physical Properties Mean Particle Size 80 Dry Color White True Density 0.5 g/cc Free Moisture Content < 0.1% Bulk Density 0.9 g/cc Availability & Packaging: Lead time is typi- cally less than five days. Packaged in 19 lb bags or 1,500 lb super sacks.

34226688_TDS.pdf

by | Sep 27, 2025