by | Sep 27, 2025
Technical Data Sheet – METYX USA Reinforcements
PRODUCT CODE 5200.003.010
PRODUCT NAME TR-WA-E 3400
PRODUCT DESCRIPTION 0 /+45 /-45 E-GLASS FABRIC
CUSTOMER CODE/SPEC. NO ETLX 3400
LOCATION/PRODUCTION LINE METYX USA
REVISION STATUS/DATE REV.0 / 03.16.2019
REINFORCEMENT CONSTRUCTION
LAYER FIBER TYPE AREAL WEIGHT
1 0 2400 Tex E-Glass 472gr/m
2
(13.92oz/yd
2
)
2 +45 300 Tex E-Glass 368 gr/m
2
(10.85oz./yd
2
)
3 -45 300 Tex E-Glass 368 gr/m
2
(10.85oz/yd
2
)
4
Stitch 167 dtex PES 26 gr/m
2
(0.76oz/yd
2
)
* Measurement method based on ISO 3374.
** 1 inch is equal to 2,54 cm.
TOTAL* 1234 gr/m (36.39oz/yd
2
) ( 3%)
OTHER PROPERTIES ROLL INFO
Stitch Gauge 10 stitches/inch Roll Width 1270mm (50 inches)
Stitch Type Tricot/Pillar Roll Weight ~106.6kgs (~235lbs)
Stitch Length 2.6mm Roll Length 68m 5 m (223ft + 16ft)
Pilot Yarn / Position N/A Core Diameter 76 mm (3 inches)
Resin Compatibility Loss on Ignition Moisture Content
Polyester, Vinylester, Epoxy resins Max.%0,70 by weight (ISO 1887) Max.%0,15 by weight (ISO 3344)
Packaging
All rolls are wrapped with polyethylene bags; placed in pallet boxes or in single cardboard boxes or in pyramid
style on pallets.
Labelling
Each roll is labelled on the inner side of the core, on the bag or on the cardboard boxes including a unique
reference number for its traceability.
Storage
Store at %70(max) relative humidity and 5-40 C temperature range.
Recommended to be brought to working area 24 hrs prior to use. Shelf life is minimum 18 Months.
System Certifications Product Certifications
ISO 9001:2015 DNV-TYPE APPROVED
Prepared By/Date : Checked By/Date : Approved By/Date:
M. McCulloch / 03.16.2019
Reviewed By/Date : Confirmed By/Date : Approved By/Date:
S. Kanburoglu / 03.17.2019 S. Misencik / 03.17.2019
2504 Lowell Road Gastonia NC 28054
Phone : +1 704-824-1030, Fax : +1-704-824-1031, Web : www.metyx.com
FR-165-0/25.011.2018
by | Sep 27, 2025
Technical Datasheet – METYX USA Reinforcements
PRODUCT CODE
PRODUCT NAME METYCORE 750M/180PP/750M
PRODUCT DESCRIPTION METYCORE
CUSTOMER CODE –
CUSTOMER ID –
REINFORCEMENT CONSTRUCTION
LAYER FIBER TYPE AREA WEIGHT
1 CSM 2400tex 750 gr/m
2
2 NON-WOVEN PP 180 gr/m
2
3 CSM 2400tex 750 gr/m
2
4 Stitch 110dtex 6 gr/m
2
5
6
7
8
9
* Measurement method based on ISO 3374. TOTAL*1686g/m
2
( %10)
OTHER PORPERTIES ROLL INFO
Stitch Gauge – Roll Width 50
Stitch Type Tricot Roll Weight
Stitch Length – Roll Length
Pilot Yarn / Position NONE Core Diameter 3 in
Resin Compatibility Loss on Ignition Moisture Content
Polyester, Vinylester, Epoxy resins Max.%0,70 by weight (ISO 1887) Max.%0,20 by weight (ISO 3344)
Packaging
All rolls are wrapped with polyethylene bags; placed in pallet boxes or in single cardboard boxes or in pyramid
style on pallets.
Labelling
Each roll is labelled on the inner side of the core, on the bag or on the cardboard boxes including a unique
reference number for its traceability.
Storage
Store at %40-70 relative humidity and 64 -86 F (18 -30 C) temperature range. Recommended to be
brought to work area 24 hrs prior to use.
System Certification Product Certification
METYX products are produced by METYX USA company who is run by
ISO 9001:2015 QA System.
DNV-GL Approved
2504 Lowell Road Gastonia NC 28054
Phone : +1-704-824-1030 Fax : +1-704-824-1031 Web : www.metyx.com
FR-159-2/14.08.2018
by | Sep 27, 2025
Technical Datasheet – METYX USA Reinforcements
PRODUCT CODE
PRODUCT NAME BA-C-E 1708v1
PRODUCT DESCRIPTION +45 /-45 + CSM
PRODUCE ID
CUSTOMER CODE
CUSTOMER ID
REINFORCEMENT CONSTRUCTION
LAYER FIBER TYPE AREA WEIGHT
1 +45 275Tex E-glass 9.02 oz/yd
2
2 0 300Tex E-glass 0.08 oz/yd
2
3 90 300Tex E-glass 0.08 oz/yd
2
4 -45 275Tex E-glass 9.02 oz/yd
2
5 CSM 2400Tex E-Glass 8.1 oz/yd
2
6 Stitch 76dtex 0.17 oz/yd
2
* Measurement method based on ISO 3374 TOTAL* 26.5 oz/yd
2
[ %3]
OTHER PORPERTIES ROLL INFO
Stitch Gauge 5 Roll Width (in) 50 38 20 6
Stitch Type Tricot Roll Weight (lb) – nominal 200 152 80 24
Stitch Length Roll Length
Pilot Yarn / Position none Core Diameter 3 in
Resin Compatibility Loss on Ignition Moisture Content
Polyester, Vinylester, Epoxy resins Max.%0,70 by weight (ISO 1887) Max.%0,20 by weight (ISO 3344)
Packaging
All rolls are wrapped with polyethylene bags; placed in pallet boxes or in single cardboard boxes or in pyramid
style on pallets.
Labelling
Each roll is labelled on the inner side of the core, on the bag or on the cardboard boxes including a unique
reference number for its traceability.
Storage
Store at %40-70 relative humidity and 18-30C temperature range. Recommended to be brought to working
area 24 hrs prior to use.
System Certification Product Certification
METYX products are produced by METYX USA company who is run by
ISO 9001 QA System.
DNV-GL Approved
2504 Lowell Road Gastonia NC 28054
Phone : +1-704-824-1030 Fax : +1-704-824-1031 Web : www.metyx.com
FR-159-2/08.05.2019
by | Sep 27, 2025
Technical Datasheet – METYX USA Reinforcements
PRODUCT CODE
PRODUCT NAME BA-C-E 1708v1
PRODUCT DESCRIPTION +45 /-45 + CSM
PRODUCE ID
CUSTOMER CODE
CUSTOMER ID
REINFORCEMENT CONSTRUCTION
LAYER FIBER TYPE AREA WEIGHT
1 +45 275Tex E-glass 9.02 oz/yd
2
2 0 300Tex E-glass 0.08 oz/yd
2
3 90 300Tex E-glass 0.08 oz/yd
2
4 -45 275Tex E-glass 9.02 oz/yd
2
5 CSM 2400Tex E-Glass 8.1 oz/yd
2
6 Stitch 76dtex 0.17 oz/yd
2
* Measurement method based on ISO 3374 TOTAL* 26.5 oz/yd
2
[ %3]
OTHER PORPERTIES ROLL INFO
Stitch Gauge 5 Roll Width (in) 50 38 20 6
Stitch Type Tricot Roll Weight (lb) – nominal 200 152 80 24
Stitch Length Roll Length
Pilot Yarn / Position none Core Diameter 3 in
Resin Compatibility Loss on Ignition Moisture Content
Polyester, Vinylester, Epoxy resins Max.%0,70 by weight (ISO 1887) Max.%0,20 by weight (ISO 3344)
Packaging
All rolls are wrapped with polyethylene bags; placed in pallet boxes or in single cardboard boxes or in pyramid
style on pallets.
Labelling
Each roll is labelled on the inner side of the core, on the bag or on the cardboard boxes including a unique
reference number for its traceability.
Storage
Store at %40-70 relative humidity and 18-30C temperature range. Recommended to be brought to working
area 24 hrs prior to use.
System Certification Product Certification
METYX products are produced by METYX USA company who is run by
ISO 9001 QA System.
DNV-GL Approved
2504 Lowell Road Gastonia NC 28054
Phone : +1-704-824-1030 Fax : +1-704-824-1031 Web : www.metyx.com
FR-159-2/08.05.2019
by | Sep 27, 2025
Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com
by | Sep 27, 2025
Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com
by | Sep 27, 2025
Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com
by | Sep 27, 2025
Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com
by | Sep 27, 2025
Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com
by | Sep 27, 2025
(Specifications subject to change without notification.)
No. TP-N758
Date: 05-Oct-18
Supersedes: na
Page: 1 of 2
CUSTOMER
ACCEPTANCE
STANDARD
CONFORMAT N758 and N758 XS REINFORCING MAT
I. DESCRIPTION
Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable
making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer
Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra
surface veil, N758XS provides an outstanding surface finish.
II. BINDER SYSTEM
Can be produced with any of Superior s binder systems.
III. VISUAL APPEARANCE
This product is a white in color, highly consistent continuous filament glass fiber mat, supplied
in rolls with trimmed edges. Each roll is significantly free of tears, holes, dirt, grease, foreign
materials and non-uniform glass clumps or strands.
IV. SPECIFICATIONS
A. IMPERIAL
Weight per Sq. Ft.
Production Range
Roll Width
Production Range
Roll Length
Production Range
Roll Diameter
Production
Range
Nominal Binder
Production Range
0.50 oz. to 2.00oz 15″ to 96″
200′ to 450′ Based
on Ounce Weight
18″ to 22″ Based
on Ounce Weight
5% Based on
Process
Requirements
TOL (+/- 15%) TOL (+/- .125″) TOL (+/- 50′) TOL (+/- 2″) TOL (+/-2%)
B. METRIC
Weight per Sq. M.
Production Range
Roll Width
Production Range
Roll Length
Production Range
Roll Diameter
Production
Range
Nominal Binder
Production Range
154g to 614g 381mm to 2438mm
61m to 137m Based
on Gram Weight
457mm to
559mm Based
on Gram Weight
5% Based on
Process
Requirements
TOL (+/- 15%) TOL (+/- 3.2mm) TOL (+/- 15.2m) TOL (+/- 50mm) TOL (+/-2%)
*Weight per sq ft is the calculated average for each roll.
** Widths of 2 14 available upon request with additional slitting charge.
***Binder percentage of total condensed mat before oven cure.
(Specifications subject to change without notification.)
No. TP-N758
Date: 05-Oct-18
Supersedes: na
Page: 2 of 2
CUSTOMER
ACCEPTANCE
STANDARD
C. EXTRA SURFACE OPTION:
CONFORMAT N758XS is produced with an additional SURMAT type veil on one
surface in turn enhancing the surface quality of the finished part. It has the additional
advantage of lowering the process costs by reducing the layers of mat material
handled during pattern cutting or loading of molds by giving you two products in one.
An additional price will apply. The weight of the additional surface product is included
in the weight per square foot (or SQM).
D. PACKAGING
All mats are wound onto (4 ) I.D. (10.2cm) heavy duty cardboard cores. Each roll is
individually contained within a polyethylene sleeve, placed on a 44″ x 45 x 3.5
(11.00cm x 11.25cm x 8.89cm) wooden pallet and stretch wrapped for protection
during shipment. Typically there are four to six (4-6) rolls per skid. Material 36-inch
(91.4cm) wide or less may be double stacked on a skid.
Optional packaging methods are available. Additional charges may apply.
A. Three (3) inch I.D. (7.62cm) heavy duty cardboard core.
B. Cardboard box and skid.
C. Vacuum packaging for 10% space reduction.
D. Cardboard box, vinyl band with stretch wrap on skid.
E. Other methods available upon request.
Each roll is individually marked with product designation, roll number, roll width, roll
length and roll weight.
E. STORAGE
For best performance results, it is recommended that SHC products are stored at
temperatures between 10 C and 35 C at relative humidity below 85%.
SHC Products should remain in the original packaging materials until just prior to use.
F. WARRANTY
See Superior’s Terms and Conditions documentation.
