27H8PP20_TDS.pdf
27H8PP13_TDS.pdf
27H8PP05_TDS.pdf
27H80025P_TDS.pdf
Divinycell H provides excellent mechanical properties to low weight.
The unique PVC chemical structure, yields impressive mechanical
performance to a low weight. Divinycell H has been widely used and
has a proven track record in virtually every application area where
sandwich composites are employed including the marine (leisure,
military and commercial), land transportation, wind energy, civil
engineering/infrastructure and general industrial markets.
Divinycell H is ideal for applications subject to fatigue, slamming or
impact loads. Other key features of Divinycell H include consistent
high quality, excellent adhesion/peel strength, excellent chemical
resistance, low water absorption and good thermal/acoustic
insulation. Divinycell H is compatible with virtually all commonly
used resin and manufacturing systems.
Divinycell PVC foams also feature very low resin uptake, enabling
weight and cost saving.
HIGH PERFORMANCE PVC CORE MATERIAL
Low water absorption
Superior damage tolerance
Fast and easy to process
Good chemical resistance
Excellent fatigue properties
Low resin uptake
Wide range of properties
Provides excellent mechanical properties to a low weight
Good temperature resistance
PRODUCT CHARACTERISTICS
diabgroup.com
MECHANICAL PROPERTIES
Property Test Pr ocedure Unit H45 H60 H80 H100 H130 H160 H200 H250
Compressive
Strength
1 ASTM D 1621 MPa
Nominal 0.6 0.9 1.4 2.0 3.0 3.4 5.4 7. 2
Minimum 0.5 0.7 1.15 1.65 2.4 2.8 4.5 6.1
Compressive Modulus
1
A S T M D1621-B-7 3MPa
Nominal 50 70 90 135 170 200 310 400
Minimum 45 60 80 115 145 175 265 350
Tensile Strength
1
ASTM D 1623 MPa
Nominal 1.4 1.8 2.5 3.5 4.8 5.4 7. 1 9.2
Minimum 1.1 1.5 2.2 2.5 3.5 4.0 6.3 8.0
Tensile Modulus
1
ASTM D 1623 MPa
Nominal 55 75 95 130 175 205 250 320
Minimum 45 57 85 105 135 160 210 260
Shear Strength ASTM C 273 MPa
Nominal 0.56 0.76 1.15 1.6 2.2 2.6 3.5 4.5
Minimum 0.46 0.63 0.95 1.4 1.9 2.2 3.2 3.9
Shear Modulus ASTM C 273 MPa
Nominal 15 20 27 35 50 60 73 97
Minimum 12 16 23 28 40 50 65 81
Shear Strain ASTM C 273 % Nominal 12 20 30 40 40 40 45 45
Density ISO 845 kg/m
3
Nominal 48 60 80 100 130 160 200 250
All values measured at +23 C
1. Properties measured perpendicular to the plane.
Nominal value is an average value of a mechanical property at nominal density.
Minimum value is a minimum guaranteed mechanical property a material has independently of density.
TECHNICAL DATA
Divinycell H
The foam can be used in sandwich structures, for outdoor exposure, with external skin temperatures up to +85 C.
Maximum processing temperature is dependent on time, pressure, and process conditions. To confirm that Divinycell H is compatible with users particular
processing parameters and for optimal design of applications used in high operating temperatures in combination with continuous load, please contact
Diab Technical Services.
Disclaimer:
This data sheet may be subject to revision and changes due to development
and changes of the material. The data is derived from tests and experience. If
not stated as minimum values, the data is average data and should be treated
as such. Calculations should be verified by actual tests. The data is furnished
without liability for the company and does not constitute a warranty or repre-
sentation in respect of the material or its use. The company reserves the right
to release new data sheets in replacement.
All content in this publication is protected by international copyright laws.
Copyright Diab November 2024.
Diab Group
Drottninggatan 7, 5th floor
SE-252 21 Helsingborg, Sweden
Tel +46 (0) 430 163 00
E-mail: info@diabgroup.com Datasheet Diab Divinycell H rev 24 SI November 2024
TECHNICAL CHARACTERISTICS
DIMENSIONS
Characteristics
1
Unit H45 H60 H80 H100 H130 H160 H200 H250 Test method
Density variation % +15/-10%+15/-10%+9/-16%+15/-10%+15/-10%+15/-10%+15/-10%+16/-10% –
Thermal conductivity
2
W/(m-K) 0.028 0.029 0.031 0.033 0.036 0.040 0.044 0.049 EN 12667
Coeff, linear heat expansion x10
-6
/ C 40 40 40 40 40 40 40 40 ISO 4897
Heat Distortion Temperature C +1 2 5 +1 2 5 +1 2 5 +1 2 5 +1 2 5 +1 2 5 +1 2 5 +1 2 5 DIN 53424
Continous temp range C – 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0 –
Max process temp C +90 +90 +90 +1 10 +1 10 +1 10 +1 10 +1 10 –
Dissipation factor – 0.0002 0.0003 0.0005 0.0006 0.0009 0.0012 0.0015 0.0019 ASTM D 2520
Dielectric constant – 1.05 1.06 1.09 1.11 1.15 1.18 1.23 1.29 ASTM D 2520
Poissons ratio
3
– 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 D638-08
Format Unit H45 H60 H80 H100 H130H160 H200 H250
Plain sheets
Lengthmm 2440 2440 2440 21601960 1860 1730 1640
Width mm 1220 1220 1220 1070 970 915 850 800
GS sheet
Lengthmm 1220 1220 12201080 980 930 865 –
Width mm 813 813 813 1070 970 915 850 –
GS sheet
Lengthmm 1220 1220 1220 – – – – –
Width mm 1220 1220 1220 – – – – –
1. Typical values
2. Thermal conductivity at +20 C
3. Standard deviation is 0.045
STORAGE OF PRODUCT
The shelf life of Divinycell is unlimited when it is stored in its original package
on ambient indoor storage conditions and protected against UV exposure.
Divinycell H is type approved by:
Tolerances Unit Length Width Thickness
Plain sheets mm -10/+6 -5/+6 -/+ 0.5
27H5848082000_TDS.pdf
Rev.: 6/10/22
Property Test Method Units 5848 Q Ply 8lb 1.0
Thickness
—
—
(in) 1.03
Areal weight (lb/ft
2
) 1.39
Flexural modulus
ASTM D7249/D790
(psi) 468,000
Flexural Strength [22in Support Span] (psi) 179.2
EI (Flexural Rigidity) [22in Support Span] (lbf*in
2
) 128,000
Compressive Strength
ASTM C365
(psi) 868.5
Compressive Modulus (psi) 44,000
Screw Pull Force Through (Partial) Polystrand Internal (lbf) 342 (186)
Key Characteristics
Technical Property Comparison of Composite Panels
Product description
Polystrand Composite Panel is a thermoplastic sandwich panel, consisting of PET closed-cell foam and fibre-glass
reinforced PET face-sheets, which are uniformly joined by a lamination/melting process
Below is Limited Technical Data for Polystrand with the construction: 5848 Quad Ply 8lb 1in PET Panel
Hammerhead : 5848 Quad Ply 8lb 1.0in PET Panel
Continuous Glass-Reinforced Thermoplastic PET Composite Panel
NOTE:
The data listed herein reflect typical panel properties. They are the latest available at the time of publication and are reliable to the best knowledge of
Avient. The properties are listed solely to give general guidance and are not to be construed as a warranty or representation for of this information or the
safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety
and suitability of each such product or product combination for their own purposes. We sell the products without warranty. Buyers and users assume all
responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.
The technical data sheet is titled Preliminary due to the small population of data for this newly released tape.
Copyright 2017, PolyOne/Avient Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the
Information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the
information. Some of the Information arises from laboratory work with small-scale equipment which may not provide a reliable indication of
performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state
minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause
material properties to shift from the values stated in the Information. PolyOne makes no warranties or guarantees respecting suitability of either
PolyOne s products or the Information for your process or end-use application. You have the responsibility to conduct full-scale end-product
performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information and/or use
or handling of any product. POLYONE/AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected
by the Information. This data sheet shall NOT operate as permission, recommendation, or inducement to practice any patented invention without
permission of the patent owner.
27H5848081500_TDS.pdf
Rev.: 6/10/22
Property Test Method Units 5848 Q Ply 8lb 1.0
Thickness
—
—
(in) 1.03
Areal weight (lb/ft
2
) 1.39
Flexural modulus
ASTM D7249/D790
(psi) 468,000
Flexural Strength [22in Support Span] (psi) 179.2
EI (Flexural Rigidity) [22in Support Span] (lbf*in
2
) 128,000
Compressive Strength
ASTM C365
(psi) 868.5
Compressive Modulus (psi) 44,000
Screw Pull Force Through (Partial) Polystrand Internal (lbf) 342 (186)
Key Characteristics
Technical Property Comparison of Composite Panels
Product description
Polystrand Composite Panel is a thermoplastic sandwich panel, consisting of PET closed-cell foam and fibre-glass
reinforced PET face-sheets, which are uniformly joined by a lamination/melting process
Below is Limited Technical Data for Polystrand with the construction: 5848 Quad Ply 8lb 1in PET Panel
Hammerhead : 5848 Quad Ply 8lb 1.0in PET Panel
Continuous Glass-Reinforced Thermoplastic PET Composite Panel
NOTE:
The data listed herein reflect typical panel properties. They are the latest available at the time of publication and are reliable to the best knowledge of
Avient. The properties are listed solely to give general guidance and are not to be construed as a warranty or representation for of this information or the
safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety
and suitability of each such product or product combination for their own purposes. We sell the products without warranty. Buyers and users assume all
responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.
The technical data sheet is titled Preliminary due to the small population of data for this newly released tape.
Copyright 2017, PolyOne/Avient Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the
Information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the
information. Some of the Information arises from laboratory work with small-scale equipment which may not provide a reliable indication of
performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state
minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause
material properties to shift from the values stated in the Information. PolyOne makes no warranties or guarantees respecting suitability of either
PolyOne s products or the Information for your process or end-use application. You have the responsibility to conduct full-scale end-product
performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information and/or use
or handling of any product. POLYONE/AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected
by the Information. This data sheet shall NOT operate as permission, recommendation, or inducement to practice any patented invention without
permission of the patent owner.
27H5848081000_TDS.pdf
Rev.: 6/10/22
Property Test Method Units 5848 Q Ply 8lb 1.0
Thickness
—
—
(in) 1.03
Areal weight (lb/ft
2
) 1.39
Flexural modulus
ASTM D7249/D790
(psi) 468,000
Flexural Strength [22in Support Span] (psi) 179.2
EI (Flexural Rigidity) [22in Support Span] (lbf*in
2
) 128,000
Compressive Strength
ASTM C365
(psi) 868.5
Compressive Modulus (psi) 44,000
Screw Pull Force Through (Partial) Polystrand Internal (lbf) 342 (186)
Key Characteristics
Technical Property Comparison of Composite Panels
Product description
Polystrand Composite Panel is a thermoplastic sandwich panel, consisting of PET closed-cell foam and fibre-glass
reinforced PET face-sheets, which are uniformly joined by a lamination/melting process
Below is Limited Technical Data for Polystrand with the construction: 5848 Quad Ply 8lb 1in PET Panel
Hammerhead : 5848 Quad Ply 8lb 1.0in PET Panel
Continuous Glass-Reinforced Thermoplastic PET Composite Panel
NOTE:
The data listed herein reflect typical panel properties. They are the latest available at the time of publication and are reliable to the best knowledge of
Avient. The properties are listed solely to give general guidance and are not to be construed as a warranty or representation for of this information or the
safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety
and suitability of each such product or product combination for their own purposes. We sell the products without warranty. Buyers and users assume all
responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.
The technical data sheet is titled Preliminary due to the small population of data for this newly released tape.
Copyright 2017, PolyOne/Avient Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the
Information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the
information. Some of the Information arises from laboratory work with small-scale equipment which may not provide a reliable indication of
performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state
minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause
material properties to shift from the values stated in the Information. PolyOne makes no warranties or guarantees respecting suitability of either
PolyOne s products or the Information for your process or end-use application. You have the responsibility to conduct full-scale end-product
performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information and/or use
or handling of any product. POLYONE/AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected
by the Information. This data sheet shall NOT operate as permission, recommendation, or inducement to practice any patented invention without
permission of the patent owner.
27H45300P_TDS.pdf
Divinycell H provides excellent mechanical properties to low weight.
The unique IPN chemical structure, yields impressive mechanical
performance to a low weight. Divinycell H has been widely used and
has a proven track record in virtually every application area where
sandwich composites are employed including the marine (leisure,
military and commercial), land transportation, wind energy, civil
engineering/infrastructure and general industrial markets.
Divinycell H is ideal for applications subject to fatigue, slamming or
impact loads. Other key features of Divinycell H include consistent
high quality, excellent adhesion/peel strength, excellent chemical
resistance, low water absorption and good thermal/acoustic
insulation. Divinycell H is compatible with virtually all commonly
used resin and manufacturing systems.
HIGH PERFORMANCE IPN CORE MATERIAL
Low water absorption
Superior damage tolerance
Fast and easy to process
Good chemical resistance
Excellent fatigue properties
Low resin uptake
Wide range of properties
Provides excellent mechanical properties to a low weight
PRODUCT CHARACTERISTICS
diabgroup.com
MECHANICAL PROPERTIES DIVINYCELL
H
Property Test Pr ocedure Unit H45 H60 H80 H100 H130 H160 H200 H250
Compressive
Strength
1 ASTM D 1621 MPa
Nominal 0.6 0.9 1.4 2.0 3.0 3.4 5.4 7. 2
Minimum 0.5 0.7 1.15 1.65 2.4 2.8 4.5 6.1
Compressive Modulus
1
A S T M D1621-B-7 3MPa
Nominal 50 70 90 135 170 200 310 400
Minimum 45 60 80 115 145 175 265 350
Tensile Strength
1
ASTM D 1623 MPa
Nominal 1.4 1.8 2.5 3.5 4.8 5.4 7. 1 9.2
Minimum 1.1 1.5 2.2 2.5 3.5 4.0 6.3 8.0
Tensile Modulus
1
ASTM D 1623 MPa
Nominal 55 75 95 130 175 205 250 320
Minimum 45 57 85 105 135 160 210 260
Shear Strength ASTM C 273 MPa
Nominal 0.56 0.76 1.15 1.6 2.2 2.6 3.5 4.5
Minimum 0.46 0.63 0.95 1.4 1.9 2.2 3.2 3.9
Shear Modulus ASTM C 273 MPa
Nominal 15 20 27 35 50 60 73 97
Minimum 12 16 23 28 40 50 65 81
Shear Strain ASTM C 273 % Nominal 12 20 30 40 40 40 45 45
Density ISO 845 kg/m
3
Nominal 48 60 80 100 130 160 200 250
All values measured at +23 C
1. Properties measured perpendicular to the plane
Nominal value is an average value of a mechanical property at a nominal density
Minimum value is a minimum guaranteed mechanical property a material has
independently of density
TECHNICAL DATA
Divinycell H
Continuous operating temperature is typically -200 C to +70 C. The foam can be used in sandwich structures, for outdoor exposure, with external skin tempera-
tures up to +85 C. For optimal design of applications used in high operating temperatures in combination with continuous load, please contact Diab Technical
Services for detailed design instructions.
Maximum processing temperature is dependent on time, pressure and process conditions. Therefore users are advised to contact Diab Technical Services to
confirm that Divinycell H is compatible with their particular processing parameters.
Disclaimer:
This data sheet may be subject to revision and changes due to development
and changes of the material. The data is derived from tests and experience. If
not stated as minimum values, the data is average data and should be treated
as such. Calculations should be verified by actual tests. The data is furnished
without liability for the company and does not constitute a warranty or repre-
sentation in respect of the material or its use. The company reserves the right
to release new data sheets in replacement.
All content in this publication is protected by international copyright laws.
Copyright Diab July 2018.
Diab Group
Drottninggatan 7, 5th floor
SE-252 21 Helsingborg, Sweden
Tel +46 (0) 430 163 00
E-mail: info@diabgroup.com
Datasheet Diab Divinycell H rev19 SI June 2020
TECHNICAL CHARACTERISTICS DIVINYCELL
H
PHYSICAL CHARACTERISTICS DIVINYCELL
H
Characteristics
1
Unit H45 H60 H80 H100 H130 H160 H200 H250 Test method
Density variation % 10 10 10 10 10 10 10 10 –
Thermal conductivity
2
W/(m-K)0.028 0.029 0.031 0.033 0.036 0.040 0.044 0.049 EN 12667
Coeff, linear heat expansion x10
-6
/ C 40 40 40 40 40 40 40 40 ISO 4897
Heat Distortion Temperature C +1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5 DIN 53424
Continous temp range C – 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0-
Max process temp C +90 +90 +90 +1 10 +1 10 +1 10 +1 10 +1 10 –
Dissipation factor – 0.00020.00030.00050.00060.00090.00120.00150.0019 ASTM D 2520
Dielectric constant – 1.05 1.06 1.09 1.11 1.15 1.18 1.23 1.29 ASTM D 2520
Poissons ratio
3
– 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 D638-08
Format Unit H45 H60 H80 H100 H130H160 H200 H250
Plain sheets
Lengthmm 2440 2440 2440 21601960 1860 1730 1640
Width mm 1220 1220 1220 1070 970 915 850 800
GS sheet
Lengthmm 1220 1220 12201080 980 930 865 –
Width mm 813 813 813 1070 970 915 850 –
GS sheet
Lengthmm 1220 1220 1220 – – – – –
Width mm 1220 1220 1220 – – – – –
1. Typical values
2. Thermal conductivity at +20 C
3. Standard deviation is 0.045
TECHNICAL CHARACTERISTICS
Divinycell H is type approved by:
27H45200P_TDS.pdf
Divinycell H provides excellent mechanical properties to low weight.
The unique IPN chemical structure, yields impressive mechanical
performance to a low weight. Divinycell H has been widely used and
has a proven track record in virtually every application area where
sandwich composites are employed including the marine (leisure,
military and commercial), land transportation, wind energy, civil
engineering/infrastructure and general industrial markets.
Divinycell H is ideal for applications subject to fatigue, slamming or
impact loads. Other key features of Divinycell H include consistent
high quality, excellent adhesion/peel strength, excellent chemical
resistance, low water absorption and good thermal/acoustic
insulation. Divinycell H is compatible with virtually all commonly
used resin and manufacturing systems.
HIGH PERFORMANCE IPN CORE MATERIAL
Low water absorption
Superior damage tolerance
Fast and easy to process
Good chemical resistance
Excellent fatigue properties
Low resin uptake
Wide range of properties
Provides excellent mechanical properties to a low weight
PRODUCT CHARACTERISTICS
diabgroup.com
MECHANICAL PROPERTIES DIVINYCELL
H
Property Test Pr ocedure Unit H45 H60 H80 H100 H130 H160 H200 H250
Compressive
Strength
1 ASTM D 1621 MPa
Nominal 0.6 0.9 1.4 2.0 3.0 3.4 5.4 7. 2
Minimum 0.5 0.7 1.15 1.65 2.4 2.8 4.5 6.1
Compressive Modulus
1
A S T M D1621-B-7 3MPa
Nominal 50 70 90 135 170 200 310 400
Minimum 45 60 80 115 145 175 265 350
Tensile Strength
1
ASTM D 1623 MPa
Nominal 1.4 1.8 2.5 3.5 4.8 5.4 7. 1 9.2
Minimum 1.1 1.5 2.2 2.5 3.5 4.0 6.3 8.0
Tensile Modulus
1
ASTM D 1623 MPa
Nominal 55 75 95 130 175 205 250 320
Minimum 45 57 85 105 135 160 210 260
Shear Strength ASTM C 273 MPa
Nominal 0.56 0.76 1.15 1.6 2.2 2.6 3.5 4.5
Minimum 0.46 0.63 0.95 1.4 1.9 2.2 3.2 3.9
Shear Modulus ASTM C 273 MPa
Nominal 15 20 27 35 50 60 73 97
Minimum 12 16 23 28 40 50 65 81
Shear Strain ASTM C 273 % Nominal 12 20 30 40 40 40 45 45
Density ISO 845 kg/m
3
Nominal 48 60 80 100 130 160 200 250
All values measured at +23 C
1. Properties measured perpendicular to the plane
Nominal value is an average value of a mechanical property at a nominal density
Minimum value is a minimum guaranteed mechanical property a material has
independently of density
TECHNICAL DATA
Divinycell H
Continuous operating temperature is typically -200 C to +70 C. The foam can be used in sandwich structures, for outdoor exposure, with external skin tempera-
tures up to +85 C. For optimal design of applications used in high operating temperatures in combination with continuous load, please contact Diab Technical
Services for detailed design instructions.
Maximum processing temperature is dependent on time, pressure and process conditions. Therefore users are advised to contact Diab Technical Services to
confirm that Divinycell H is compatible with their particular processing parameters.
Disclaimer:
This data sheet may be subject to revision and changes due to development
and changes of the material. The data is derived from tests and experience. If
not stated as minimum values, the data is average data and should be treated
as such. Calculations should be verified by actual tests. The data is furnished
without liability for the company and does not constitute a warranty or repre-
sentation in respect of the material or its use. The company reserves the right
to release new data sheets in replacement.
All content in this publication is protected by international copyright laws.
Copyright Diab July 2018.
Diab Group
Drottninggatan 7, 5th floor
SE-252 21 Helsingborg, Sweden
Tel +46 (0) 430 163 00
E-mail: info@diabgroup.com
Datasheet Diab Divinycell H rev19 SI June 2020
TECHNICAL CHARACTERISTICS DIVINYCELL
H
PHYSICAL CHARACTERISTICS DIVINYCELL
H
Characteristics
1
Unit H45 H60 H80 H100 H130 H160 H200 H250 Test method
Density variation % 10 10 10 10 10 10 10 10 –
Thermal conductivity
2
W/(m-K)0.028 0.029 0.031 0.033 0.036 0.040 0.044 0.049 EN 12667
Coeff, linear heat expansion x10
-6
/ C 40 40 40 40 40 40 40 40 ISO 4897
Heat Distortion Temperature C +1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5+1 2 5 DIN 53424
Continous temp range C – 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0- 2 0 0 /+7 0-
Max process temp C +90 +90 +90 +1 10 +1 10 +1 10 +1 10 +1 10 –
Dissipation factor – 0.00020.00030.00050.00060.00090.00120.00150.0019 ASTM D 2520
Dielectric constant – 1.05 1.06 1.09 1.11 1.15 1.18 1.23 1.29 ASTM D 2520
Poissons ratio
3
– 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 D638-08
Format Unit H45 H60 H80 H100 H130H160 H200 H250
Plain sheets
Lengthmm 2440 2440 2440 21601960 1860 1730 1640
Width mm 1220 1220 1220 1070 970 915 850 800
GS sheet
Lengthmm 1220 1220 12201080 980 930 865 –
Width mm 813 813 813 1070 970 915 850 –
GS sheet
Lengthmm 1220 1220 1220 – – – – –
Width mm 1220 1220 1220 – – – – –
1. Typical values
2. Thermal conductivity at +20 C
3. Standard deviation is 0.045
TECHNICAL CHARACTERISTICS
Divinycell H is type approved by: