by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005130 Article Description SAERcore 450/PP18/450 – 1250mm
Textile Structure 7005544 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 450 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 450 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.1 % Total areal weight 1087 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005153 Article Description SAERcore 450/PP25/450 – 1250mm
Textile Structure 7005549 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 450 g/m +/- 10.0 % E-glass
2 Core 250 g/m +/- 10.0 % Polypropylen
1 CSM 450 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.1 % Total areal weight 1157 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30007817 Article Description SAERcore 300/PP13/300 – 1250mm
Textile Structure 7007850 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 135 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 742 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30007553 Article Description SAERflow 150/BX304 – 1270mm
Textile Structure 7007999 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
5 CSM 150 g/m +/- 10,0 % E-glass
4 0 10 g/m +/- 5,0 % E-glass 34 TEX
3 45 134 g/m +/- 5,0 % – Hybrid Glass 380,00 TEX
2 0 10 g/m +/- 5,0 % E-glass 34 TEX
1 45 134 g/m +/- 5,0 % – Hybrid Glass 380,00 TEX
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3,5 Stitching pattern tricot Width (nominal) 1270 mm
Stitch length 4,00 mm Total tolerance 7,1 % Total areal weight 445 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage Keep in original packaging. Store in a dry environment. Avoid direct sunlight.
(recommendation) Fabrics to be kept under processing conditions at least 24 hours
prior to use to avoid problems with humidity and electrostatic charge.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
Combiflow
Ahlstrom Corporation
Ahlstrom Combiflow is a special reinforcement for closed mold processes.
It consists of three layers; two layers of chopped glassfiber on the surfaces and a porous elastic layer in
the middle providing an excellent resin flow. The elastic layer is marked with SP code.
PRODUCT
CODE
PRODUCT IDENTIFICATION
OZ/FT2
COMBIFLOW
THICKNESS MIL
DIN53855
LAMINATE
THICKNESS MIL
A31300 M1.0/SP180/M1.0 134 65-130
A31450 M1.5/SP180/M1.5 185 80-150
A31600 M2.0/SP180/M2.0 235 90-170
A32300 M1.0/SP250/M1.0 170 75-150
A32450 M1.5/SP250/M1.5 215 90-165
A32600 M2.0/SP250/M2.0 270 100-190
+ optionally surface tissue A80
Ahlstrom Combiflow s binder free construction gives excellent drape ability, very good resin flow and
good compatibility with resins.
The products easy lay up in the mold and very high wetting capacity increase productivity and make your
production more economical.
Good surface finish as well as high glass content with high mechanical properties can be reached with
Ahlstrom Combiflow. Above all preforming can be omitted in most applications.
MECHANICAL DATA UNIT M1.5/SP180/M1.5 STD
Tensile Strength Mpa 122 ISO 3238
Tensile Modulus Mpa 7900 ISO 3268
Erogation at Break % 2.3 ISO 3268
Flexural Strength MPa 151 ISO 178
Flexural Modulus MPa 6300 ISO 178
Fiber Content %-w 35.4 ISO 1172
Matrix Polyester Resin – –
FRP Services reserves the right to change the information given herein without prior notice. We believe this information to be reliable, but
do not guarantee its applicability to the user s process or assume liability for occurrence arising out of its use. The user, by accepting
products described herein agrees to be responsible for thoroughly testing any application before committing to production.
FRP SERVICES & COMPANY
1-15-9 Awaza, Nishi-ku, Osaka 550-0011, Japan
TEL:+81-6-6535-1933 FAX:+81-6-6535-1675
www.frpservices.com
COMPARISON TEST UNIT
COMBIFLOW
M1.5/SP180/M1.5
CFM 1.5oz/ft2
Tensile Strength MPa 151 76
Elongation at Break % 2.5 2.0
E-Modulus MPa 9113 5366
Energy/Work Nmm 5303 2709
Flexural Strength Mpa 191 134
Flexion % 3.4 3.1
E-Modulus MPa 7309 5118
Energy/Work Nmm 4185 3248
Impact Strength KJ/m2 47.9 39.8
Shear Strength MPa 31.1 26.5
Barcol Hardness – 50-55 35-45
Glass Content %-w 41.0 30.3
Number of Layers – 3 6
Thickness mil – 180-200 215-235
*TEST METHOD Polyester Resin: Viscosity 200cP Curling System: 1%Col%=1%MEKP Laminate
Size: 16″X32″ Application: Between Films Vacuum 0.6 bar Resin Injection Time: 8and 15mins
Packaging
WIDTH
INCH
ROLL
LENGTH(yd)
PALLET
WEIGHT(lb)
QUANTITY PER FCL 20′
(lb)
A31300 M1.0/SP180/M1.0 50 49 386 7,720
A31450 M1.5/SP180/M1.5 50 44 457 9,140
A31600 M2.0/SP180/M2.0 50 38 530 10,600
A32300 M1.0/SP250/M1.0 50 38 326 6,520
A32450 M1.5/SP250/M1.5 50 38 442 8,840
A 32600 M2.0/SP250/M2.0 50 27 398 7,960
* Every roll is individually wrapped, 4 rolls on pallet, 20 pallets per 20’FCL
This product is specially made for exclusive sale into the NAFTA-countries and South America.
SOLE AGENTS FOR NORTH & SOUTH AMERICA, JAPAN, ASIA PACIFIC
FRP SERVICES & COMPANY
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10,0 % E-glass
2 Core 180 g/m +/- 10,0 % Polypropylen
1 CSM 300 g/m +/- 10,0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3,5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4,00 mm Total tolerance 10,2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage Keep in original packaging. Store in a dry environment. Avoid direct sunlight.
(recommendation) Fabrics to be kept under processing conditions at least 24 hours
prior to use to avoid problems with humidity and electrostatic charge.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30012310 Article Description SAERcore 300/PP135/300 – 1250mm
Textile Structure 7007807 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Fleece 135 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 742 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
ISO 9001:2015 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2020
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
