25SP205A_TDS.pdf
25SP205-D_TDS.pdf
SP-205 A/B Page 1 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SP-205 A/B
80 SHORE D SPRAY APPLIED POLYURETHANE
SP-205 A/B is a two component rigid polyurethane material designed to provide high strength, high impact, and good heat resistance
for the fabrication of structural parts, composite type structures, and for coatings that serve many purposes.
SP-205 A/B can be sprayed with conventional plural component high pressure spray equipment or with BJB s CPE-25 and CPE-40
pneumatic hand held spray guns.
Used for rapid production of parts, composite structures, and molds
Provides excellent surface finishes built on polyurethane rigid foam and styrofoam
Superior adhesion to a wide variety of substrates, most notably rigid foams and wood
Excellent impact resistance coupled with high flexural strength
Provides very fine detail reproduction
Convenient 1:1 by volume mix ratio
Movie Special Effects Props Prototype Models Theming
Art Industry Automotive Industry Architectural Industry
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMPERATURE
CURE*
Hardness, Shore D ASTM D2240-04e1 80 5
Density (g/cc) ASTM D792-00 1.175
Cubic Inches per Pound N/A 24.78
Color/Appearance Visual Gray / Opaque
Tensile Strength (psi) ASTM D638-03 5,900
Tensile Modulus (psi) ASTM D638-03 234,000
Elongation (%) ASTM D638-03 22
Flexural Strength (psi) ASTM D790-03 8,400
Flexural Modulus (psi) ASTM D790-03 220,000
Shrinkage (in/in) linear 12 x1/2 x1/2 0.0082
Izod Impact (ft-lb/in) notched ASTM D256-05 0.77
Heat Deflection Temperature (66 psi) ASTM D648-04 190 F (87.8 C)
Heat Deflection Temperature (264 psi) ASTM D648-04 148 F (64.4 C)
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 180 F (82 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 90
Mix Ratio by volume 100 100
Specific Gravity @ 77 F (25 C) 1.18 1.052
Color Yellow Gray
Viscosity (cps) @ 77 F (25 C) Brookfield 325 1,000
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 650
Gel Time 30 35 seconds
Demold Time @ 77 F (25 C) 30 45 minutes
Properties above are typical and not for specifications.
CURE SCHEDULE:
SPRAYABLE POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SP-205 A/B Page 2 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the
physical properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 180 F (82 C). Do not
exceed curing temperatures of 200 F (93 C). Support of the part may be required to prevent part deformation during the heat curing
process.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Cubic Inches
per Kit
Gallon Kits 8 lbs. 7.2 lbs. 377
5-Gallon Kits 40 lbs. 36 lbs. 1,883
SAFETY PRECAUTIONS:
Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an
allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this
product. Use in well-ventilated areas. Avoid breathing vapors. If exposures cannot be kept at a minimum, a respirator may be
necessary in addition to ventilation. The use of a positive pressure air supplied respirator is mandatory when airborne isocyanate
concentrations are not known or exceeds OSHA S TWA of 0.005 ppm. Air purifying, organic cartridge type respirators are not
generally recommended to use when handling this material without implementation of an end of life service program. Observe
OSHA regulations for respirator use (29 CFR 1910.134). Employers are responsible for selecting the correct respirator for each
situation.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended to
remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by emergency personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl
esters, C10-rich and Titanium Dioxide (TiO2) which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
25SC89-F_TDS.pdf
SC-89 THINNER Page 1 of 1 Date: 09/01/2021
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprise.com
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as to
merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
PIGMENT, RELEASE & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
SC-89 THINNER
FOR REDUCING SC-89 PAINT
SC-89 Thinner has been reformulated to incorporate the use of safer solvents.* This thinner is recommended for use with BJB’s SC-89
series paints. It may also be used as a part cleaner prior to painting.
USAGE:
When thinning the SC-89 paint for spraying, use 2 1/2 – 3 parts thinner to one part paint. This dilution ratio will eliminate the “cob-
webbing” often observed during spraying. When brushing SC-89 paint, generally a one to one dilution is adequate.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
5-Gallon pails 34 lbs.
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on
the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when
handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek qualified medical
attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed
by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
* SC-89 Thinner now conforms to the EPA’s new Clean Air Act, Section 112 and the voluntary 33-50 program. It contains no hazardous
air pollutants (HAP’s) per 40 CFR part 61; and contains no ozone depleting chemicals (ODC’s) per 40 CFR part 82.
WARNING: This product can expose you to chemicals including methyl isobutyl ketone, which is known to the State of California
to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
An ISO-9001 Certified company
25SC22-G_TDS.pdf
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
25SC22-F_TDS.pdf
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
25SC22-D_TDS.pdf
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
25RS1405BD_TDS.pdf
Product Information
Units Test Method Results
pcf ASTM D-1622-03 4.5 – 5.5
psi ASTM D-1620 85
psi ASTM D-1623 110
BTU-in/hr-ft
2
– FASTM C-177 0.18 – 0.20
% ASTM D-1940 > 93%
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.22 – 1.24 1.04 – 1.07
cPs 180 – 220 600 – 800
– Amber Beige
Seconds
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The
data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon
this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Rise Time
Tack Free Time
RS 1405
TECHNICAL DATA SHEET
Spray Rigid Foam Polyurethane System
Final Cure Time
3 – 4
10 – 12
18 – 22
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
RS 1405 is a two-component CFC, HCFC and HFC free polyurethane foam designed for spray in place
applications. This formulation is recommended where thermal insulation, structural integrity and
environmentally friendly efficient products are required. RS 1405 spray in place foam system shall be
applied in half inch passes or less, maximum 1 inch passes, using standard plural component
polyurethane foam high pressure, impingement mix temperature controlled equipment.
*Properties are typical and not for specifications*
K-Factor
Handling Characteristics
Tensile Strength
Closed Cell Content
Physical Properties (Final Product)
Free Rise Density
Compressive Strength
275 gallon plastic totes
Specific Gravity @ 75 F
25RS1405AD_TDS.pdf
Product Information
Units Test Method Results
pcf ASTM D-1622-03 4.5 – 5.5
psi ASTM D-1620 85
psi ASTM D-1623 110
BTU-in/hr-ft
2
– FASTM C-177 0.18 – 0.20
% ASTM D-1940 > 93%
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.22 – 1.24 1.04 – 1.07
cPs 180 – 220 600 – 800
– Amber Beige
Seconds
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The
data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon
this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Rise Time
Tack Free Time
RS 1405
TECHNICAL DATA SHEET
Spray Rigid Foam Polyurethane System
Final Cure Time
3 – 4
10 – 12
18 – 22
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
RS 1405 is a two-component CFC, HCFC and HFC free polyurethane foam designed for spray in place
applications. This formulation is recommended where thermal insulation, structural integrity and
environmentally friendly efficient products are required. RS 1405 spray in place foam system shall be
applied in half inch passes or less, maximum 1 inch passes, using standard plural component
polyurethane foam high pressure, impingement mix temperature controlled equipment.
*Properties are typical and not for specifications*
K-Factor
Handling Characteristics
Tensile Strength
Closed Cell Content
Physical Properties (Final Product)
Free Rise Density
Compressive Strength
275 gallon plastic totes
Specific Gravity @ 75 F
25RS1402B-D_TDS.pdf
Date: 1/26/22
RS 1402
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 1250-1350
Specific Gravity (gr/ml) 1.22 – 1.24 1.07-1.09
Physical Properties (Final Product)
Free Rise Density (pcf) 1.9 – 2.2
K-Factor (ASTM C-177) 0.15 – 0.18
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 20-25
Tensile Strength (psi) (ASTM D-1623) 42-45
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 4 – 7
Rise Time (seconds) 12 – 18
Tack Free Time (seconds) 12 – 18
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1402 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1402 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.