by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70 – 75
psi ASTM D-412 > 3500
psi ASTM D-790 > 8000
% ASTM D-412 5
pli ASTM D-624 –
– Visual Natural/Pigmented
Units Component A Component B
(A/B) – –
(A/B) 50 50
g/mL 1.14 – 1.16 1.08 – 1.10
cPs 60 – 150 200 – 250
Visual Pale Yellow Opaque/White
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
38 lbNet Weight
Component B: 450 lbNet Weight
38 lbNet Weight
Physical Properties (Final Product)
CE 0787
TECHNICAL DATA SHEET
Cast Elastomer Polyurethane System
CE 0787 is a High Performance, multi-purpose polyurethane cast elastomer designed for hand
mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE 0787 is tough with high impact resistance along with excellent chemical
and water resistance. CE 0787 performs well for many casting applications with a low viscosity it
picks up excellent detail in silicone molds.
Shore Hardness
Tensile Strength
Fluxural Strength
Elongation
Tear Strength
Gel Time @ 75 F 160 – 200
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
55 gallon steel drum (open top)
5 gallon plastic pail (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
5 gallon plastic pail (open top)
Tack Free Time at Gel
Demold Time 10 – 20
90% Cure Time* 24
Color
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 06/1/2014
CE 0726B
Product Information
CE 726B is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough yet
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 0726B performs well as Concrete Stamp pad and Concrete Form Liners.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 200 – 300 600 – 900
Specific Gravity (gr/ml) 1.01 – 1.03 1.02 – 1.05
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70- 75
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Opaque
Handling Characteristics
Mix Ratio by Weight (Component A: Component B) 53a / 47b
Mix ratio by volume 50a / 50b
Gel Time (at 75 degrees F), (seconds) 160 – 200
Tack Free Time (seconds) at Gel
Demold Time (minutes) 15 25
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of 48 hours.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product MSDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 06/1/2014
CE 0726B
Product Information
CE 726B is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough yet
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 0726B performs well as Concrete Stamp pad and Concrete Form Liners.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 200 – 300 600 – 900
Specific Gravity (gr/ml) 1.01 – 1.03 1.02 – 1.05
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70- 75
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Opaque
Handling Characteristics
Mix Ratio by Weight (Component A: Component B) 53a / 47b
Mix ratio by volume 50a / 50b
Gel Time (at 75 degrees F), (seconds) 160 – 200
Tack Free Time (seconds) at Gel
Demold Time (minutes) 15 25
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of 48 hours.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product MSDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: 714 480 1370 Fax: 714 558 1990
Date: 03/11/2013
CE0717 WHT
Product Information
CE0717 WHT is a High Performance, multi-purpose polyurethane Cast Elastomer designed for Hand
Mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE0717 WHT is tough with high impact resistance along with excellent chemical
and water resistance. CE0717 WHT performs well as Horns, Teeth and Tusk for Taxidermy
applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 60 – 150 200 – 250
Specific Gravity (gr/ml) 1.14 – 1.16 1.08 – 1.10
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70 – 75
Tensile Strength (psi), ASTM D-412 >3500
Elongation (%), ASTM D-412 5.0
Flexural Strength ASTM D-790 >8,000
Color White
Handling Characteristics
Mix Ratio by Volume (Component A: Component B) 50A / 50B
Mix Ratio by Weight 52A / 48B
Gel Time (at 75oF), (seconds) 180 – 210
Tack Free Time (seconds) at Gel
Demold Time 10-20 minutes
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: 714 480 1370 Fax: 714 558 1990
Date: 03/11/2013
CE0717 WHT
Product Information
CE0717 WHT is a High Performance, multi-purpose polyurethane Cast Elastomer designed for Hand
Mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE0717 WHT is tough with high impact resistance along with excellent chemical
and water resistance. CE0717 WHT performs well as Horns, Teeth and Tusk for Taxidermy
applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 60 – 150 200 – 250
Specific Gravity (gr/ml) 1.14 – 1.16 1.08 – 1.10
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70 – 75
Tensile Strength (psi), ASTM D-412 >3500
Elongation (%), ASTM D-412 5.0
Flexural Strength ASTM D-790 >8,000
Color White
Handling Characteristics
Mix Ratio by Volume (Component A: Component B) 50A / 50B
Mix Ratio by Weight 52A / 48B
Gel Time (at 75oF), (seconds) 180 – 210
Tack Free Time (seconds) at Gel
Demold Time 10-20 minutes
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
105 Pardue Road
Pelham, AL 35124
Phone: 205-663-3225
Density Flatwise Tensile Screw Retention
ASTM C271 ASTM C297 #12 Sheet Metal
Strength Modulus Strength Modulus Strength Strength Modulus Strength
(lb/Ft^3) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs)
Bluewater 32
0.75″ 32 648 27,412 1,581 54,969 562 5,538 278,169 330
Bluewater 26
0.75″ 26 504 18,618 1,015 35,407 549 4,848 266,238 262
Bluewater 20
0.75″ 20 363 12,744 655 22,603 536 3,525 224,273 252
Nautical 24
0.75″ 24 521 18,136 1,092 28,796 724 3,853 177,190 227
Nautical 20
0.75″ 20 432 13,092 600 20,633 570 2,968 169,755 275
Nautical 15
0.75″ 15 320 6,787 447 10,429 411 1,572 74,297 149
* All properties evaluated on rigid sheet. Other thicknesses should have similar performance based on that specific panel density.
Revised January 2024
Flexural Properties
ASTM D790ASTM C365
Core Compressive
Important! The information and data presented herein are based upon information reasonably available to Coosa Compoistes, LLC from independent testing labs at the time of publicaiton
and are presented in good faith, but are not to be construed as guarantees or warranties, express or implied, regarding performance, results to be obtained from use, comprehensiveness,
and merchantability. You should throughly test any application, and independently determine satisfactory performance before commercializatoin or use.
Core Shear
ASTM C273
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
105 Pardue Road
Pelham, AL 35124
Phone: 205-663-3225
Density Flatwise Tensile Screw Retention
ASTM C271 ASTM C297 #12 Sheet Metal
Strength Modulus Strength Modulus Strength Strength Modulus Strength
(lb/Ft^3) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs)
Bluewater 32
0.75″ 32 648 27,412 1,581 54,969 562 5,538 278,169 330
Bluewater 26
0.75″ 26 504 18,618 1,015 35,407 549 4,848 266,238 262
Bluewater 20
0.75″ 20 363 12,744 655 22,603 536 3,525 224,273 252
Nautical 24
0.75″ 24 521 18,136 1,092 28,796 724 3,853 177,190 227
Nautical 20
0.75″ 20 432 13,092 600 20,633 570 2,968 169,755 275
Nautical 15
0.75″ 15 320 6,787 447 10,429 411 1,572 74,297 149
* All properties evaluated on rigid sheet. Other thicknesses should have similar performance based on that specific panel density.
Revised January 2024
Flexural Properties
ASTM D790ASTM C365
Core Compressive
Important! The information and data presented herein are based upon information reasonably available to Coosa Compoistes, LLC from independent testing labs at the time of publicaiton
and are presented in good faith, but are not to be construed as guarantees or warranties, express or implied, regarding performance, results to be obtained from use, comprehensiveness,
and merchantability. You should throughly test any application, and independently determine satisfactory performance before commercializatoin or use.
Core Shear
ASTM C273
by | Sep 27, 2025
BR-75D REV 1 Brushable A/B Page 1 of 2 Date: 08/14/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
BR-75D REV 1 BRUSHABLE A/B
75 SHORE D POLYURETHANE
BR-75D REV 1 Brushable is a 75 Shore D rigid high impact material. This product is designed to be either brushed into a mold to
create a durable hard-shell part, or brushed onto the back of silicone glove molds to create a tough mother mold or shell.
RoHS/REACH Compliant Popular for Parts & Molds Easy to Pigment
Special Effects & Props High Impact Easy Mix Ratio
PHYSICAL PROPERTIES TEST METHOD RESULTS*
Hardness, Shore D ASTM D2240-04e1 75 5
Density (g/cc) ASTM D792-00 1.116
Cubic Inches per Pound N/A 25.67
Color/Appearance Visual Opaque Cream
Tensile Strength (psi) ASTM D412-98a(2002)e1 3,600
Tensile Modulus (psi) ASTM D412-98a(2002)e1 1.5 x 10
5
Elongation (%) ASTM D412-98a(2002)e1 15
Tear Strength (pli) ASTM D624-00e1 155
Dielectric Constant, 1 MHz ASTM D150-87 3.172
Dissipation Factor, 1 MHz ASTM D150-87 0.0287
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume 86 100
Specific Gravity @ 77 F (25 C) 1.15 1.001
Color Pale Yellow Cream
Viscosity (cps) @ 77 F (25 C) Brookfield 425 18,000
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 24,000
Work Time, 100g mass @ 77 F (25 C) 10 12 minutes
Gel Time 14 16 minutes
Demold Time @ 77 F (25 C) 2 3 hours
Properties above are typical and not for specifications.
RIGID FILLED & UNFILLED URETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
BR-75D REV 1 Brushable A/B Page 2 of 2 Date: 08/14/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial compliance is to be
determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as to merchantability, fitness for a particular
purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed Manufacturer’s sale price of the particular quantity with respect to
which damages are claimed.”
IMPORTANT MIXING DIRECTION:
It is important to remix the B component thoroughly prior to combining with the A side.
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). Support of the part may be required to prevent part deformation during the heat curing process.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Cubic Inches per
Kit
Quart Kits 1.5 lbs. 1.5 lbs. 77
Gallon Kits 6 lbs. 6 lbs. 308
5-Gallon Kits 30 lbs. 30 lbs. 1,540
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
Handling Guide
